KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
Date: Tue, 24 Dec 2019 11:10:55 +0000
Message-ID: <20191224111055.11836-33-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>

The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 virt/kvm/arm/vgic/vgic-debug.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/arm/vgic/vgic-debug.c b/virt/kvm/arm/vgic/vgic-debug.c
index cc12fe9b2df3..b13a9e3f99dd 100644
--- a/virt/kvm/arm/vgic/vgic-debug.c
+++ b/virt/kvm/arm/vgic/vgic-debug.c
@@ -178,6 +178,8 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 			    struct kvm_vcpu *vcpu)
 {
 	char *type;
+	bool pending;
+
 	if (irq->intid < VGIC_NR_SGIS)
 		type = "SGI";
 	else if (irq->intid < VGIC_NR_PRIVATE_IRQS)
@@ -190,6 +192,16 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 	if (irq->intid ==0 || irq->intid == VGIC_NR_PRIVATE_IRQS)
 		print_header(s, irq, vcpu);
 
+	pending = irq->pending_latch;
+	if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+		int err;
+
+		err = irq_get_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    &pending);
+		WARN_ON_ONCE(err);
+	}
+
 	seq_printf(s, "       %s %4d "
 		      "    %2d "
 		      "%d%d%d%d%d%d%d "
@@ -201,7 +213,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 		      "\n",
 			type, irq->intid,
 			(irq->target_vcpu) ? irq->target_vcpu->vcpu_id : -1,
-			irq->pending_latch,
+			pending,
 			irq->line_level,
 			irq->active,
 			irq->enabled,
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

      parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11   ` Robert Richter
2020-03-10 11:41     ` Marc Zyngier
2020-03-10 12:34       ` Robert Richter
2020-03-11  8:45       ` Robert Richter
2020-03-11  9:03         ` Marc Zyngier
2020-03-11  9:18           ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28  8:56   ` Zenghui Yu
2019-12-28 10:36     ` Marc Zyngier
2019-12-30  3:50       ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03   ` Zenghui Yu
2020-01-20 15:11     ` Marc Zyngier
2020-01-22  2:59   ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28  9:19   ` Zenghui Yu
2019-12-28 10:41     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-01-15  2:49   ` Shaokun Zhang
2020-01-15  3:49     ` Zenghui Yu
2020-01-15 13:32       ` Marc Zyngier
2020-01-15 13:49         ` Zenghui Yu
2020-01-16  6:13         ` Shaokun Zhang
2020-01-15 13:17     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224111055.11836-33-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git