From: Andrew Murray <andrew.murray@arm.com>
To: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/3] KVM: arm64: limit PMU version to ARMv8.4
Date: Tue, 21 Jan 2020 11:24:52 +0000 [thread overview]
Message-ID: <20200121112452.GB5109@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <336acb6b88c2df5e6114e6f8811687e4@kernel.org>
On Mon, Jan 20, 2020 at 05:55:17PM +0000, Marc Zyngier wrote:
> On 2020-01-02 12:39, Andrew Murray wrote:
> > ARMv8.5-PMU introduces 64-bit event counters, however KVM doesn't yet
> > support this. Let's trap the Debug Feature Registers in order to limit
> > PMUVer/PerfMon in the Debug Feature Registers to PMUv3 for ARMv8.4.
> >
> > Signed-off-by: Andrew Murray <andrew.murray@arm.com>
> > Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> > ---
> > arch/arm64/include/asm/sysreg.h | 4 ++++
> > arch/arm64/kvm/sys_regs.c | 36 +++++++++++++++++++++++++++++++--
> > 2 files changed, 38 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/sysreg.h
> > b/arch/arm64/include/asm/sysreg.h
> > index 6e919fafb43d..1b74f275a115 100644
> > --- a/arch/arm64/include/asm/sysreg.h
> > +++ b/arch/arm64/include/asm/sysreg.h
> > @@ -672,6 +672,10 @@
> > #define ID_AA64DFR0_TRACEVER_SHIFT 4
> > #define ID_AA64DFR0_DEBUGVER_SHIFT 0
> >
> > +#define ID_DFR0_PERFMON_SHIFT 24
> > +
> > +#define ID_DFR0_EL1_PMUVER_8_4 5
> > +
> > #define ID_ISAR5_RDM_SHIFT 24
> > #define ID_ISAR5_CRC32_SHIFT 16
> > #define ID_ISAR5_SHA2_SHIFT 12
> > diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> > index 9f2165937f7d..61b984d934d1 100644
> > --- a/arch/arm64/kvm/sys_regs.c
> > +++ b/arch/arm64/kvm/sys_regs.c
> > @@ -668,6 +668,37 @@ static bool
> > pmu_access_event_counter_el0_disabled(struct kvm_vcpu *vcpu)
> > return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_ER |
> > ARMV8_PMU_USERENR_EN);
> > }
> >
> > +static bool access_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
> > + struct sys_reg_params *p,
> > + const struct sys_reg_desc *rd)
> > +{
> > + if (p->is_write)
> > + return write_to_read_only(vcpu, p, rd);
> > +
> > + /* Limit guests to PMUv3 for ARMv8.4 */
> > + p->regval = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
> > + p->regval = cpuid_feature_cap_signed_field_width(p->regval,
> > + ID_AA64DFR0_PMUVER_SHIFT,
> > + 4, ID_DFR0_EL1_PMUVER_8_4);
> > +
> > + return p->regval;
>
> If feels very odd to return the register value in place of a something
> that actually indicates whether we should update the PC or not. I have
> no idea what is happening here in this case.
This should have returned true. I have no idea why I did this.
>
> > +}
> > +
> > +static bool access_id_dfr0_el1(struct kvm_vcpu *vcpu, struct
> > sys_reg_params *p,
> > + const struct sys_reg_desc *rd)
> > +{
> > + if (p->is_write)
> > + return write_to_read_only(vcpu, p, rd);
> > +
> > + /* Limit guests to PMUv3 for ARMv8.4 */
> > + p->regval = read_sanitised_ftr_reg(SYS_ID_DFR0_EL1);
> > + p->regval = cpuid_feature_cap_signed_field_width(p->regval,
> > + ID_DFR0_PERFMON_SHIFT,
> > + 4, ID_DFR0_EL1_PMUVER_8_4);
> > +
> > + return p->regval;
>
> Same here.
>
> > +}
> > +
> > static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params
> > *p,
> > const struct sys_reg_desc *r)
> > {
> > @@ -1409,7 +1440,8 @@ static const struct sys_reg_desc sys_reg_descs[] =
> > {
> > /* CRm=1 */
> > ID_SANITISED(ID_PFR0_EL1),
> > ID_SANITISED(ID_PFR1_EL1),
> > - ID_SANITISED(ID_DFR0_EL1),
> > + { SYS_DESC(SYS_ID_DFR0_EL1), access_id_dfr0_el1 },
>
> How about the .get_user and .set_user accessors that were provided by
> ID_SANITISED and that are now dropped? You should probably define a
> new wrapper that allows you to override the .access method.
Yes I can do that, thus ensuring we continue to return sanitised values
rather than the current vcpu value.
However should I also update read_id_reg - thus ensuring the host sees
the same value that the guest sees? (I see this already does something
similar with AA64PFR0 and AA64ISAR1).
Thanks,
Andrew Murray
>
> > +
> > ID_HIDDEN(ID_AFR0_EL1),
> > ID_SANITISED(ID_MMFR0_EL1),
> > ID_SANITISED(ID_MMFR1_EL1),
> > @@ -1448,7 +1480,7 @@ static const struct sys_reg_desc sys_reg_descs[] =
> > {
> > ID_UNALLOCATED(4,7),
> >
> > /* CRm=5 */
> > - ID_SANITISED(ID_AA64DFR0_EL1),
> > + { SYS_DESC(SYS_ID_AA64DFR0_EL1), access_id_aa64dfr0_el1 },
> > ID_SANITISED(ID_AA64DFR1_EL1),
> > ID_UNALLOCATED(5,2),
> > ID_UNALLOCATED(5,3),
>
> Thanks,
>
> M.
> --
> Jazz is not dead. It just smells funny...
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2020-01-21 11:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-02 12:39 [PATCH v3 0/3] arm64: perf: Add support for ARMv8.5-PMU 64-bit counters Andrew Murray
2020-01-02 12:39 ` [PATCH v3 1/3] arm64: cpufeature: Extract capped fields Andrew Murray
2020-01-02 16:22 ` Suzuki Kuruppassery Poulose
2020-01-02 12:39 ` [PATCH v3 2/3] KVM: arm64: limit PMU version to ARMv8.4 Andrew Murray
2020-01-20 17:44 ` Will Deacon
2020-01-21 11:28 ` Andrew Murray
2020-01-20 17:55 ` Marc Zyngier
2020-01-21 9:04 ` Will Deacon
2020-01-21 11:18 ` Andrew Murray
2020-01-21 11:24 ` Andrew Murray [this message]
2020-01-02 12:39 ` [PATCH v3 3/3] arm64: perf: Add support for ARMv8.5-PMU 64-bit counters Andrew Murray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200121112452.GB5109@e119886-lin.cambridge.arm.com \
--to=andrew.murray@arm.com \
--cc=catalin.marinas@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).