From: Zenghui Yu <yuzenghui@huawei.com>
To: <linux-kernel@vger.kernel.org>, <maz@kernel.org>
Cc: jason@lakedaemon.net, tglx@linutronix.de,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/6] irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
Date: Thu, 6 Feb 2020 15:57:11 +0800 [thread overview]
Message-ID: <20200206075711.1275-7-yuzenghui@huawei.com> (raw)
In-Reply-To: <20200206075711.1275-1-yuzenghui@huawei.com>
V{PEND,PROP}BASER registers are actually located in VLPI_base frame
of the *redistributor*. Rename their accessors to reflect this fact.
No functional changes.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
---
arch/arm/include/asm/arch_gicv3.h | 12 ++++++------
arch/arm64/include/asm/arch_gicv3.h | 8 ++++----
drivers/irqchip/irq-gic-v3-its.c | 28 ++++++++++++++--------------
3 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index b5752f0e8936..c815477b4303 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -326,16 +326,16 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr)
#define gits_write_cwriter(v, c) __gic_writeq_nonatomic(v, c)
/*
- * GITS_VPROPBASER - hi and lo bits may be accessed independently.
+ * GICR_VPROPBASER - hi and lo bits may be accessed independently.
*/
-#define gits_read_vpropbaser(c) __gic_readq_nonatomic(c)
-#define gits_write_vpropbaser(v, c) __gic_writeq_nonatomic(v, c)
+#define gicr_read_vpropbaser(c) __gic_readq_nonatomic(c)
+#define gicr_write_vpropbaser(v, c) __gic_writeq_nonatomic(v, c)
/*
- * GITS_VPENDBASER - the Valid bit must be cleared before changing
+ * GICR_VPENDBASER - the Valid bit must be cleared before changing
* anything else.
*/
-static inline void gits_write_vpendbaser(u64 val, void __iomem *addr)
+static inline void gicr_write_vpendbaser(u64 val, void __iomem *addr)
{
u32 tmp;
@@ -352,7 +352,7 @@ static inline void gits_write_vpendbaser(u64 val, void __iomem *addr)
__gic_writeq_nonatomic(val, addr);
}
-#define gits_read_vpendbaser(c) __gic_readq_nonatomic(c)
+#define gicr_read_vpendbaser(c) __gic_readq_nonatomic(c)
static inline bool gic_prio_masking_enabled(void)
{
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 4750fc8030c3..25fec4bde43a 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -140,11 +140,11 @@ static inline u32 gic_read_rpr(void)
#define gicr_write_pendbaser(v, c) writeq_relaxed(v, c)
#define gicr_read_pendbaser(c) readq_relaxed(c)
-#define gits_write_vpropbaser(v, c) writeq_relaxed(v, c)
-#define gits_read_vpropbaser(c) readq_relaxed(c)
+#define gicr_write_vpropbaser(v, c) writeq_relaxed(v, c)
+#define gicr_read_vpropbaser(c) readq_relaxed(c)
-#define gits_write_vpendbaser(v, c) writeq_relaxed(v, c)
-#define gits_read_vpendbaser(c) readq_relaxed(c)
+#define gicr_write_vpendbaser(v, c) writeq_relaxed(v, c)
+#define gicr_read_vpendbaser(c) readq_relaxed(c)
static inline bool gic_prio_masking_enabled(void)
{
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 811875bf3abb..1ee95f546cb0 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2429,7 +2429,7 @@ static u64 inherit_vpe_l1_table_from_rd(cpumask_t **mask)
* ours wrt CommonLPIAff. Let's use its own VPROPBASER.
* Make sure we don't write the Z bit in that case.
*/
- val = gits_read_vpropbaser(base + SZ_128K + GICR_VPROPBASER);
+ val = gicr_read_vpropbaser(base + SZ_128K + GICR_VPROPBASER);
val &= ~GICR_VPROPBASER_4_1_Z;
gic_data_rdist()->vpe_l1_base = gic_data_rdist_cpu(cpu)->vpe_l1_base;
@@ -2452,7 +2452,7 @@ static bool allocate_vpe_l2_table(int cpu, u32 id)
if (!gic_rdists->has_rvpeid)
return true;
- val = gits_read_vpropbaser(base + SZ_128K + GICR_VPROPBASER);
+ val = gicr_read_vpropbaser(base + SZ_128K + GICR_VPROPBASER);
esz = FIELD_GET(GICR_VPROPBASER_4_1_ENTRY_SIZE, val) + 1;
gpsz = FIELD_GET(GICR_VPROPBASER_4_1_PAGE_SIZE, val);
@@ -2524,8 +2524,8 @@ static int allocate_vpe_l1_table(void)
* effect of making sure no doorbell will be generated and we can
* then safely clear VPROPBASER.Valid.
*/
- if (gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER) & GICR_VPENDBASER_Valid)
- gits_write_vpendbaser(GICR_VPENDBASER_PendingLast,
+ if (gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER) & GICR_VPENDBASER_Valid)
+ gicr_write_vpendbaser(GICR_VPENDBASER_PendingLast,
vlpi_base + GICR_VPENDBASER);
/*
@@ -2548,8 +2548,8 @@ static int allocate_vpe_l1_table(void)
/* First probe the page size */
val = FIELD_PREP(GICR_VPROPBASER_4_1_PAGE_SIZE, GIC_PAGE_SIZE_64K);
- gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
- val = gits_read_vpropbaser(vlpi_base + GICR_VPROPBASER);
+ gicr_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
+ val = gicr_read_vpropbaser(vlpi_base + GICR_VPROPBASER);
gpsz = FIELD_GET(GICR_VPROPBASER_4_1_PAGE_SIZE, val);
esz = FIELD_GET(GICR_VPROPBASER_4_1_ENTRY_SIZE, val);
@@ -2620,7 +2620,7 @@ static int allocate_vpe_l1_table(void)
val |= GICR_VPROPBASER_4_1_VALID;
out:
- gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
+ gicr_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
cpumask_set_cpu(smp_processor_id(), gic_data_rdist()->vpe_table_mask);
pr_debug("CPU%d: VPROPBASER = %llx %*pbl\n",
@@ -2727,14 +2727,14 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
bool clean;
u64 val;
- val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
+ val = gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
val &= ~GICR_VPENDBASER_Valid;
val &= ~clr;
val |= set;
- gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+ gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
do {
- val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
+ val = gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
clean = !(val & GICR_VPENDBASER_Dirty);
if (!clean) {
count--;
@@ -2849,7 +2849,7 @@ static void its_cpu_init_lpis(void)
val = (LPI_NRBITS - 1) & GICR_VPROPBASER_IDBITS_MASK;
pr_debug("GICv4: CPU%d: Init IDbits to 0x%llx for GICR_VPROPBASER\n",
smp_processor_id(), val);
- gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
+ gicr_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
/*
* Also clear Valid bit of GICR_VPENDBASER, in case some
@@ -3523,7 +3523,7 @@ static void its_vpe_schedule(struct its_vpe *vpe)
val |= (LPI_NRBITS - 1) & GICR_VPROPBASER_IDBITS_MASK;
val |= GICR_VPROPBASER_RaWb;
val |= GICR_VPROPBASER_InnerShareable;
- gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
+ gicr_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
val = virt_to_phys(page_address(vpe->vpt_page)) &
GENMASK_ULL(51, 16);
@@ -3541,7 +3541,7 @@ static void its_vpe_schedule(struct its_vpe *vpe)
val |= GICR_VPENDBASER_PendingLast;
val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0;
val |= GICR_VPENDBASER_Valid;
- gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+ gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
}
static void its_vpe_deschedule(struct its_vpe *vpe)
@@ -3741,7 +3741,7 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
val |= info->g1en ? GICR_VPENDBASER_4_1_VGRP1EN : 0;
val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id);
- gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+ gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
}
static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
--
2.19.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
prev parent reply other threads:[~2020-02-06 7:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 7:57 [PATCH v2 0/6] irqchip/gic-v4.1: Cleanup and fixes for GICv4.1 Zenghui Yu
2020-02-06 7:57 ` [PATCH v2 1/6] irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE Zenghui Yu
2020-02-06 7:57 ` [PATCH v2 2/6] irqchip/gic-v4.1: Set vpe_l1_base for all redistributors Zenghui Yu
2020-02-06 7:57 ` [PATCH v2 3/6] irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level Zenghui Yu
2020-02-13 14:22 ` Marc Zyngier
2020-02-13 15:11 ` Zenghui Yu
2020-02-06 7:57 ` [PATCH v2 4/6] irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() Zenghui Yu
2020-02-06 7:57 ` [PATCH v2 5/6] irqchip/gic-v3-its: Remove superfluous WARN_ON Zenghui Yu
2020-02-06 7:57 ` Zenghui Yu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206075711.1275-7-yuzenghui@huawei.com \
--to=yuzenghui@huawei.com \
--cc=jason@lakedaemon.net \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).