KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v4 10/20] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
Date: Fri, 14 Feb 2020 14:57:26 +0000
Message-ID: <20200214145736.18550-11-maz@kernel.org> (raw)
In-Reply-To: <20200214145736.18550-1-maz@kernel.org>

In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.

This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic-v4.c       | 45 +++++++++++++++++++++++++++---
 include/kvm/arm_vgic.h             |  1 +
 include/linux/irqchip/arm-gic-v4.h |  3 +-
 virt/kvm/arm/vgic/vgic-v3.c        |  4 ++-
 virt/kvm/arm/vgic/vgic-v4.c        | 34 ++++++++++------------
 5 files changed, 61 insertions(+), 26 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v4.c b/drivers/irqchip/irq-gic-v4.c
index c01910d53f9e..117ba6db023d 100644
--- a/drivers/irqchip/irq-gic-v4.c
+++ b/drivers/irqchip/irq-gic-v4.c
@@ -87,6 +87,11 @@ static struct irq_domain *gic_domain;
 static const struct irq_domain_ops *vpe_domain_ops;
 static const struct irq_domain_ops *sgi_domain_ops;
 
+static bool has_v4_1(void)
+{
+	return !!sgi_domain_ops;
+}
+
 int its_alloc_vcpu_irqs(struct its_vm *vm)
 {
 	int vpe_base_irq, i;
@@ -139,18 +144,50 @@ static int its_send_vpe_cmd(struct its_vpe *vpe, struct its_cmd_info *info)
 	return irq_set_vcpu_affinity(vpe->irq, info);
 }
 
-int its_schedule_vpe(struct its_vpe *vpe, bool on)
+int its_make_vpe_non_resident(struct its_vpe *vpe, bool db)
 {
-	struct its_cmd_info info;
+	struct irq_desc *desc = irq_to_desc(vpe->irq);
+	struct its_cmd_info info = { };
 	int ret;
 
 	WARN_ON(preemptible());
 
-	info.cmd_type = on ? SCHEDULE_VPE : DESCHEDULE_VPE;
+	info.cmd_type = DESCHEDULE_VPE;
+	if (has_v4_1()) {
+		/* GICv4.1 can directly deal with doorbells */
+		info.req_db = db;
+	} else {
+		/* Undo the nested disable_irq() calls... */
+		while (db && irqd_irq_disabled(&desc->irq_data))
+			enable_irq(vpe->irq);
+	}
+
+	ret = its_send_vpe_cmd(vpe, &info);
+	if (!ret)
+		vpe->resident = false;
+
+	return ret;
+}
+
+int its_make_vpe_resident(struct its_vpe *vpe, bool g0en, bool g1en)
+{
+	struct its_cmd_info info = { };
+	int ret;
+
+	WARN_ON(preemptible());
+
+	info.cmd_type = SCHEDULE_VPE;
+	if (has_v4_1()) {
+		info.g0en = g0en;
+		info.g1en = g1en;
+	} else {
+		/* Disabled the doorbell, as we're about to enter the guest */
+		disable_irq_nosync(vpe->irq);
+	}
 
 	ret = its_send_vpe_cmd(vpe, &info);
 	if (!ret)
-		vpe->resident = on;
+		vpe->resident = true;
 
 	return ret;
 }
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 9d53f545a3d5..63457908c9c4 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -70,6 +70,7 @@ struct vgic_global {
 
 	/* Hardware has GICv4? */
 	bool			has_gicv4;
+	bool			has_gicv4_1;
 
 	/* GIC system register CPU interface */
 	struct static_key_false gicv3_cpuif;
diff --git a/include/linux/irqchip/arm-gic-v4.h b/include/linux/irqchip/arm-gic-v4.h
index a1a9d40266f5..cca4198fa1d5 100644
--- a/include/linux/irqchip/arm-gic-v4.h
+++ b/include/linux/irqchip/arm-gic-v4.h
@@ -120,7 +120,8 @@ struct its_cmd_info {
 
 int its_alloc_vcpu_irqs(struct its_vm *vm);
 void its_free_vcpu_irqs(struct its_vm *vm);
-int its_schedule_vpe(struct its_vpe *vpe, bool on);
+int its_make_vpe_resident(struct its_vpe *vpe, bool g0en, bool g1en);
+int its_make_vpe_non_resident(struct its_vpe *vpe, bool db);
 int its_invall_vpe(struct its_vpe *vpe);
 int its_map_vlpi(int irq, struct its_vlpi_map *map);
 int its_get_vlpi(int irq, struct its_vlpi_map *map);
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index f45635a6f0ec..1bc09b523486 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -595,7 +595,9 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
 	/* GICv4 support? */
 	if (info->has_v4) {
 		kvm_vgic_global_state.has_gicv4 = gicv4_enable;
-		kvm_info("GICv4 support %sabled\n",
+		kvm_vgic_global_state.has_gicv4_1 = info->has_v4_1 && gicv4_enable;
+		kvm_info("GICv4%s support %sabled\n",
+			 kvm_vgic_global_state.has_gicv4_1 ? ".1" : "",
 			 gicv4_enable ? "en" : "dis");
 	}
 
diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
index 46f875589c47..1eb0f8c76219 100644
--- a/virt/kvm/arm/vgic/vgic-v4.c
+++ b/virt/kvm/arm/vgic/vgic-v4.c
@@ -67,10 +67,10 @@
  * it. And if we've migrated our vcpu from one CPU to another, we must
  * tell the ITS (so that the messages reach the right redistributor).
  * This is done in two steps: first issue a irq_set_affinity() on the
- * irq corresponding to the vcpu, then call its_schedule_vpe(). You
- * must be in a non-preemptible context. On exit, another call to
- * its_schedule_vpe() tells the redistributor that we're done with the
- * vcpu.
+ * irq corresponding to the vcpu, then call its_make_vpe_resident().
+ * You must be in a non-preemptible context. On exit, a call to
+ * its_make_vpe_non_resident() tells the redistributor that we're done
+ * with the vcpu.
  *
  * Finally, the doorbell handling: Each vcpu is allocated an interrupt
  * which will fire each time a VLPI is made pending whilst the vcpu is
@@ -86,7 +86,8 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
 	struct kvm_vcpu *vcpu = info;
 
 	/* We got the message, no need to fire again */
-	if (!irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
+	if (!kvm_vgic_global_state.has_gicv4_1 &&
+	    !irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
 		disable_irq_nosync(irq);
 
 	vcpu->arch.vgic_cpu.vgic_v3.its_vpe.pending_last = true;
@@ -199,19 +200,11 @@ void vgic_v4_teardown(struct kvm *kvm)
 int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db)
 {
 	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
-	struct irq_desc *desc = irq_to_desc(vpe->irq);
 
 	if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
 		return 0;
 
-	/*
-	 * If blocking, a doorbell is required. Undo the nested
-	 * disable_irq() calls...
-	 */
-	while (need_db && irqd_irq_disabled(&desc->irq_data))
-		enable_irq(vpe->irq);
-
-	return its_schedule_vpe(vpe, false);
+	return its_make_vpe_non_resident(vpe, need_db);
 }
 
 int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -232,18 +225,19 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
 	if (err)
 		return err;
 
-	/* Disabled the doorbell, as we're about to enter the guest */
-	disable_irq_nosync(vpe->irq);
-
-	err = its_schedule_vpe(vpe, true);
+	err = its_make_vpe_resident(vpe, false, vcpu->kvm->arch.vgic.enabled);
 	if (err)
 		return err;
 
 	/*
 	 * Now that the VPE is resident, let's get rid of a potential
-	 * doorbell interrupt that would still be pending.
+	 * doorbell interrupt that would still be pending. This is a
+	 * GICv4.0 only "feature"...
 	 */
-	return irq_set_irqchip_state(vpe->irq, IRQCHIP_STATE_PENDING, false);
+	if (!kvm_vgic_global_state.has_gicv4_1)
+		err = irq_set_irqchip_state(vpe->irq, IRQCHIP_STATE_PENDING, false);
+
+	return err;
 }
 
 static struct vgic_its *vgic_get_its(struct kvm *kvm,
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 14:57 [PATCH v4 00/20] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 01/20] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-02-17  9:11   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 02/20] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-02-17  9:18   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 03/20] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-02-17  9:09   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 04/20] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-02-20  3:17   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 05/20] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2020-02-20  3:21   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 06/20] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2020-02-18  7:25   ` Zenghui Yu
2020-02-18  9:46     ` Marc Zyngier
2020-02-20  3:25       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 07/20] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-02-20  3:32   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 08/20] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-02-18  7:00   ` Zenghui Yu
2020-02-18  9:27     ` Marc Zyngier
2020-02-18 15:31       ` Marc Zyngier
2020-02-19 11:50         ` Zenghui Yu
2020-02-19 15:18           ` Zenghui Yu
2020-02-20  3:11         ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 09/20] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-02-20  3:37   ` Zenghui Yu
2020-02-14 14:57 ` Marc Zyngier [this message]
2020-02-14 14:57 ` [PATCH v4 11/20] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 12/20] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 13/20] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 14/20] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 15/20] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-02-18  8:46   ` Zenghui Yu
2020-02-18  9:41     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 16/20] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-02-20  3:55   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 17/20] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 18/20] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 19/20] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 20/20] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214145736.18550-11-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git