KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v4 16/20] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts
Date: Fri, 14 Feb 2020 14:57:32 +0000
Message-ID: <20200214145736.18550-17-maz@kernel.org> (raw)
In-Reply-To: <20200214145736.18550-1-maz@kernel.org>

In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.

Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 include/kvm/arm_vgic.h      |  3 ++
 virt/kvm/arm/vgic/vgic-v3.c |  2 +
 virt/kvm/arm/vgic/vgic-v4.c | 96 +++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h    |  1 +
 4 files changed, 102 insertions(+)

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 63457908c9c4..69f4164d6477 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -231,6 +231,9 @@ struct vgic_dist {
 	/* distributor enabled */
 	bool			enabled;
 
+	/* Wants SGIs without active state */
+	bool			nassgireq;
+
 	struct vgic_irq		*spis;
 
 	struct vgic_io_device	dist_iodev;
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index 1bc09b523486..2c9fc13e2c59 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -540,6 +540,8 @@ int vgic_v3_map_resources(struct kvm *kvm)
 		goto out;
 	}
 
+	if (kvm_vgic_global_state.has_gicv4_1)
+		vgic_v4_configure_vsgis(kvm);
 	dist->ready = true;
 
 out:
diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
index c2fcde104ea2..063785fd2dc7 100644
--- a/virt/kvm/arm/vgic/vgic-v4.c
+++ b/virt/kvm/arm/vgic/vgic-v4.c
@@ -97,6 +97,102 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
 	return IRQ_HANDLED;
 }
 
+static void vgic_v4_sync_sgi_config(struct its_vpe *vpe, struct vgic_irq *irq)
+{
+	vpe->sgi_config[irq->intid].enabled	= irq->enabled;
+	vpe->sgi_config[irq->intid].group 	= irq->group;
+	vpe->sgi_config[irq->intid].priority	= irq->priority;
+}
+
+static void vgic_v4_enable_vsgis(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int i;
+
+	/*
+	 * With GICv4.1, every virtual SGI can be directly injected. So
+	 * let's pretend that they are HW interrupts, tied to a host
+	 * IRQ. The SGI code will do its magic.
+	 */
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		int ret;
+
+		if (irq->hw) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		irq->hw = true;
+		irq->host_irq = irq_find_mapping(vpe->sgi_domain, i);
+		vgic_v4_sync_sgi_config(vpe, irq);
+		/*
+		 * SGIs are initialised as disabled. Enable them if
+		 * required by the rest of the VGIC init code.
+		 */
+		desc = irq_to_desc(irq->host_irq);
+		ret = irq_domain_activate_irq(irq_desc_get_irq_data(desc),
+					      false);
+		if (!WARN_ON(ret)) {
+			/* Transfer pending state */
+			ret = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    irq->pending_latch);
+			WARN_ON(ret);
+			irq->pending_latch = false;
+		}
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		int ret;
+
+		if (!irq->hw) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		irq->hw = false;
+		ret = irq_get_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    &irq->pending_latch);
+		WARN_ON(ret);
+
+		desc = irq_to_desc(irq->host_irq);
+		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+/* Must be called with the kvm lock held */
+void vgic_v4_configure_vsgis(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	int i;
+
+	kvm_arm_halt_guest(kvm);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (dist->nassgireq)
+			vgic_v4_enable_vsgis(vcpu);
+		else
+			vgic_v4_disable_vsgis(vcpu);
+	}
+
+	kvm_arm_resume_guest(kvm);
+}
+
 /**
  * vgic_v4_init - Initialize the GICv4 data structures
  * @kvm:	Pointer to the VM being initialized
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index c7fefd6b1c80..769e4802645e 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -316,5 +316,6 @@ void vgic_its_invalidate_cache(struct kvm *kvm);
 bool vgic_supports_direct_msis(struct kvm *kvm);
 int vgic_v4_init(struct kvm *kvm);
 void vgic_v4_teardown(struct kvm *kvm);
+void vgic_v4_configure_vsgis(struct kvm *kvm);
 
 #endif
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 14:57 [PATCH v4 00/20] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 01/20] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-02-17  9:11   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 02/20] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-02-17  9:18   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 03/20] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-02-17  9:09   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 04/20] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-02-20  3:17   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 05/20] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2020-02-20  3:21   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 06/20] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2020-02-18  7:25   ` Zenghui Yu
2020-02-18  9:46     ` Marc Zyngier
2020-02-20  3:25       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 07/20] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-02-20  3:32   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 08/20] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-02-18  7:00   ` Zenghui Yu
2020-02-18  9:27     ` Marc Zyngier
2020-02-18 15:31       ` Marc Zyngier
2020-02-19 11:50         ` Zenghui Yu
2020-02-19 15:18           ` Zenghui Yu
2020-02-20  3:11         ` Zenghui Yu
2020-02-28 19:37           ` Marc Zyngier
2020-03-01 19:00             ` Marc Zyngier
2020-03-02  8:18               ` Zenghui Yu
2020-03-02 12:09                 ` Marc Zyngier
2020-03-02 14:21                   ` Bill Barrow
2020-02-14 14:57 ` [PATCH v4 09/20] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-02-20  3:37   ` Zenghui Yu
2020-02-28 19:00     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 10/20] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 11/20] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 12/20] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 13/20] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 14/20] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 15/20] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-02-18  8:46   ` Zenghui Yu
2020-02-18  9:41     ` Marc Zyngier
2020-02-14 14:57 ` Marc Zyngier [this message]
2020-02-20  3:55   ` [PATCH v4 16/20] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Zenghui Yu
2020-02-28 19:16     ` Marc Zyngier
2020-03-02  2:40       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 17/20] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 18/20] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 19/20] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 20/20] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214145736.18550-17-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git