KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Andrew Jones <drjones@redhat.com>
To: Eric Auger <eric.auger@redhat.com>
Cc: kvm@vger.kernel.org, maz@kernel.org, qemu-devel@nongnu.org,
	qemu-arm@nongnu.org, andre.przywara@arm.com,
	andrew.murray@arm.com, kvmarm@lists.cs.columbia.edu,
	eric.auger.pro@gmail.com
Subject: Re: [kvm-unit-tests PATCH v2 8/9] arm: gic: Provide per-IRQ helper functions
Date: Thu, 5 Mar 2020 10:55:29 +0100
Message-ID: <20200305095529.hkdyhghkofquat75@kamzik.brq.redhat.com> (raw)
In-Reply-To: <20200130112510.15154-9-eric.auger@redhat.com>

On Thu, Jan 30, 2020 at 12:25:09PM +0100, Eric Auger wrote:
> From: Andre Przywara <andre.przywara@arm.com>
> 
> A common theme when accessing per-IRQ parameters in the GIC distributor
> is to set fields of a certain bit width in a range of MMIO registers.
> Examples are the enabled status (one bit per IRQ), the level/edge
> configuration (2 bits per IRQ) or the priority (8 bits per IRQ).
> 
> Add a generic helper function which is able to mask and set the
> respective number of bits, given the IRQ number and the MMIO offset.
> Provide wrappers using this function to easily allow configuring an IRQ.
> 
> For now assume that private IRQ numbers always refer to the current CPU.
> In a GICv2 accessing the "other" private IRQs is not easily doable (the
> registers are banked per CPU on the same MMIO address), so we impose the
> same limitation on GICv3, even though those registers are not banked
> there anymore.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Missing Eric's s-b.

> 
> ---
> 
> initialize reg
> ---
>  lib/arm/asm/gic-v3.h |  2 +
>  lib/arm/asm/gic.h    |  9 +++++
>  lib/arm/gic.c        | 90 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
> 
> diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
> index 347be2f..4a445a5 100644
> --- a/lib/arm/asm/gic-v3.h
> +++ b/lib/arm/asm/gic-v3.h
> @@ -23,6 +23,8 @@
>  #define GICD_CTLR_ENABLE_G1A		(1U << 1)
>  #define GICD_CTLR_ENABLE_G1		(1U << 0)
>  
> +#define GICD_IROUTER			0x6000
> +
>  /* Re-Distributor registers, offsets from RD_base */
>  #define GICR_TYPER			0x0008
>  
> diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
> index 1fc10a0..21cdb58 100644
> --- a/lib/arm/asm/gic.h
> +++ b/lib/arm/asm/gic.h
> @@ -15,6 +15,7 @@
>  #define GICD_IIDR			0x0008
>  #define GICD_IGROUPR			0x0080
>  #define GICD_ISENABLER			0x0100
> +#define GICD_ICENABLER			0x0180
>  #define GICD_ISPENDR			0x0200
>  #define GICD_ICPENDR			0x0280
>  #define GICD_ISACTIVER			0x0300
> @@ -73,5 +74,13 @@ extern void gic_write_eoir(u32 irqstat);
>  extern void gic_ipi_send_single(int irq, int cpu);
>  extern void gic_ipi_send_mask(int irq, const cpumask_t *dest);
>  
> +void gic_set_irq_bit(int irq, int offset);
> +void gic_enable_irq(int irq);
> +void gic_disable_irq(int irq);
> +void gic_set_irq_priority(int irq, u8 prio);
> +void gic_set_irq_target(int irq, int cpu);
> +void gic_set_irq_group(int irq, int group);
> +int gic_get_irq_group(int irq);
> +
>  #endif /* !__ASSEMBLY__ */
>  #endif /* _ASMARM_GIC_H_ */
> diff --git a/lib/arm/gic.c b/lib/arm/gic.c
> index 9430116..aa9cb86 100644
> --- a/lib/arm/gic.c
> +++ b/lib/arm/gic.c
> @@ -146,3 +146,93 @@ void gic_ipi_send_mask(int irq, const cpumask_t *dest)
>  	assert(gic_common_ops && gic_common_ops->ipi_send_mask);
>  	gic_common_ops->ipi_send_mask(irq, dest);
>  }
> +
> +enum gic_bit_access {
> +	ACCESS_READ,
> +	ACCESS_SET,
> +	ACCESS_RMW
> +};
> +
> +static u8 gic_masked_irq_bits(int irq, int offset, int bits, u8 value,
> +			      enum gic_bit_access access)
> +{
> +	void *base;
> +	int split = 32 / bits;
> +	int shift = (irq % split) * bits;
> +	u32 reg = 0, mask = ((1U << bits) - 1) << shift;
> +
> +	switch (gic_version()) {
> +	case 2:
> +		base = gicv2_dist_base();
> +		break;
> +	case 3:
> +		if (irq < 32)
> +			base = gicv3_sgi_base();
> +		else
> +			base = gicv3_dist_base();
> +		break;
> +	default:
> +		return 0;
> +	}
> +	base += offset + (irq / split) * 4;
> +
> +	switch (access) {
> +	case ACCESS_READ:
> +		return (readl(base) & mask) >> shift;
> +	case ACCESS_SET:
> +		reg = 0;
> +		break;
> +	case ACCESS_RMW:
> +		reg = readl(base) & ~mask;
> +		break;
> +	}
> +
> +	writel(reg | ((u32)value << shift), base);
> +
> +	return 0;
> +}
> +
> +void gic_set_irq_bit(int irq, int offset)
> +{
> +	gic_masked_irq_bits(irq, offset, 1, 1, ACCESS_SET);
> +}
> +
> +void gic_enable_irq(int irq)
> +{
> +	gic_set_irq_bit(irq, GICD_ISENABLER);
> +}
> +
> +void gic_disable_irq(int irq)
> +{
> +	gic_set_irq_bit(irq, GICD_ICENABLER);
> +}
> +
> +void gic_set_irq_priority(int irq, u8 prio)
> +{
> +	gic_masked_irq_bits(irq, GICD_IPRIORITYR, 8, prio, ACCESS_RMW);
> +}
> +
> +void gic_set_irq_target(int irq, int cpu)
> +{
> +	if (irq < 32)
> +		return;
> +
> +	if (gic_version() == 2) {
> +		gic_masked_irq_bits(irq, GICD_ITARGETSR, 8, 1U << cpu,
> +				    ACCESS_RMW);
> +
> +		return;
> +	}
> +
> +	writeq(cpus[cpu], gicv3_dist_base() + GICD_IROUTER + irq * 8);
> +}
> +
> +void gic_set_irq_group(int irq, int group)
> +{
> +	gic_masked_irq_bits(irq, GICD_IGROUPR, 1, group, ACCESS_RMW);
> +}
> +
> +int gic_get_irq_group(int irq)
> +{
> +	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
> +}
> -- 
> 2.20.1
> 
>

Looks good to me.

Thanks,
drew

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30 11:25 [kvm-unit-tests PATCH v2 0/9] KVM: arm64: PMUv3 Event Counter Tests Eric Auger
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 1/9] arm64: Provide read/write_sysreg_s Eric Auger
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 2/9] arm: pmu: Let pmu tests take a sub-test parameter Eric Auger
2020-03-04 18:01   ` Andre Przywara
2020-03-05  8:44   ` Andrew Jones
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 3/9] arm: pmu: Add a pmu struct Eric Auger
2020-03-04 18:02   ` Andre Przywara
2020-03-04 18:21     ` Auger Eric
2020-03-05  8:53   ` Andrew Jones
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 4/9] arm: pmu: Check Required Event Support Eric Auger
2020-02-11 15:33   ` Peter Maydell
2020-02-11 18:08     ` Auger Eric
2020-02-11 16:28   ` Peter Maydell
2020-02-11 18:32     ` Auger Eric
2020-03-04 18:02   ` Andre Przywara
2020-03-05  9:04   ` Andrew Jones
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 5/9] arm: pmu: Basic event counter Tests Eric Auger
2020-02-11 16:27   ` Peter Maydell
2020-02-11 18:31     ` Auger Eric
2020-03-04 18:03   ` Andre Przywara
2020-03-05  9:33   ` Andrew Jones
2020-03-12 11:19     ` Auger Eric
2020-03-05  9:42   ` Andrew Jones
2020-03-12 11:16     ` Auger Eric
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 6/9] arm: pmu: Test chained counter Eric Auger
2020-02-11 16:24   ` Peter Maydell
2020-02-11 18:30     ` Auger Eric
2020-03-05  9:37   ` Andrew Jones
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 7/9] arm: pmu: test 32-bit <-> 64-bit transitions Eric Auger
2020-03-05  9:50   ` Andrew Jones
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 8/9] arm: gic: Provide per-IRQ helper functions Eric Auger
2020-03-05  9:55   ` Andrew Jones [this message]
2020-03-05 11:10     ` Alexandru Elisei
2020-01-30 11:25 ` [kvm-unit-tests PATCH v2 9/9] arm: pmu: Test overflow interrupts Eric Auger
2020-03-05 10:17   ` Andrew Jones
2020-02-11 15:42 ` [kvm-unit-tests PATCH v2 0/9] KVM: arm64: PMUv3 Event Counter Tests Peter Maydell
2020-02-11 16:07   ` Andrew Jones
2020-02-11 18:23     ` Auger Eric

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200305095529.hkdyhghkofquat75@kamzik.brq.redhat.com \
    --to=drjones@redhat.com \
    --cc=andre.przywara@arm.com \
    --cc=andrew.murray@arm.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=eric.auger@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=maz@kernel.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git