kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v6 08/23] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
Date: Fri, 20 Mar 2020 18:23:51 +0000	[thread overview]
Message-ID: <20200320182406.23465-9-maz@kernel.org> (raw)
In-Reply-To: <20200320182406.23465-1-maz@kernel.org>

Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.

For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org
---
 drivers/irqchip/irq-gic-v3-its.c   | 75 +++++++++++++++++++++++++++++-
 drivers/irqchip/irq-gic-v4.c       |  8 +++-
 include/linux/irqchip/arm-gic-v4.h |  9 +++-
 3 files changed, 88 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 54d6fdf7a28e..8313c3a871a9 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3870,6 +3870,72 @@ static struct irq_chip its_vpe_4_1_irq_chip = {
 	.irq_set_vcpu_affinity	= its_vpe_4_1_set_vcpu_affinity,
 };
 
+static int its_sgi_set_affinity(struct irq_data *d,
+				const struct cpumask *mask_val,
+				bool force)
+{
+	/*
+	 * There is no notion of affinity for virtual SGIs, at least
+	 * not on the host (since they can only be targetting a vPE).
+	 * Tell the kernel we've done whetever it asked for.
+	 */
+	return IRQ_SET_MASK_OK;
+}
+
+static struct irq_chip its_sgi_irq_chip = {
+	.name			= "GICv4.1-sgi",
+	.irq_set_affinity	= its_sgi_set_affinity,
+};
+
+static int its_sgi_irq_domain_alloc(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs,
+				    void *args)
+{
+	struct its_vpe *vpe = args;
+	int i;
+
+	/* Yes, we do want 16 SGIs */
+	WARN_ON(nr_irqs != 16);
+
+	for (i = 0; i < 16; i++) {
+		vpe->sgi_config[i].priority = 0;
+		vpe->sgi_config[i].enabled = false;
+		vpe->sgi_config[i].group = false;
+
+		irq_domain_set_hwirq_and_chip(domain, virq + i, i,
+					      &its_sgi_irq_chip, vpe);
+		irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+	}
+
+	return 0;
+}
+
+static void its_sgi_irq_domain_free(struct irq_domain *domain,
+				    unsigned int virq,
+				    unsigned int nr_irqs)
+{
+	/* Nothing to do */
+}
+
+static int its_sgi_irq_domain_activate(struct irq_domain *domain,
+				       struct irq_data *d, bool reserve)
+{
+	return 0;
+}
+
+static void its_sgi_irq_domain_deactivate(struct irq_domain *domain,
+					  struct irq_data *d)
+{
+	/* Nothing to do */
+}
+
+static const struct irq_domain_ops its_sgi_domain_ops = {
+	.alloc		= its_sgi_irq_domain_alloc,
+	.free		= its_sgi_irq_domain_free,
+	.activate	= its_sgi_irq_domain_activate,
+	.deactivate	= its_sgi_irq_domain_deactivate,
+};
+
 static int its_vpe_id_alloc(void)
 {
 	return ida_simple_get(&its_vpeid_ida, 0, ITS_MAX_VPEID, GFP_KERNEL);
@@ -4912,8 +4978,15 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
 		rdists->has_rvpeid = false;
 
 	if (has_v4 & rdists->has_vlpis) {
+		const struct irq_domain_ops *sgi_ops;
+
+		if (has_v4_1)
+			sgi_ops = &its_sgi_domain_ops;
+		else
+			sgi_ops = NULL;
+
 		if (its_init_vpe_domain() ||
-		    its_init_v4(parent_domain, &its_vpe_domain_ops)) {
+		    its_init_v4(parent_domain, &its_vpe_domain_ops, sgi_ops)) {
 			rdists->has_vlpis = false;
 			pr_err("ITS: Disabling GICv4 support\n");
 		}
diff --git a/drivers/irqchip/irq-gic-v4.c b/drivers/irqchip/irq-gic-v4.c
index 45969927cc81..c01910d53f9e 100644
--- a/drivers/irqchip/irq-gic-v4.c
+++ b/drivers/irqchip/irq-gic-v4.c
@@ -85,6 +85,7 @@
 
 static struct irq_domain *gic_domain;
 static const struct irq_domain_ops *vpe_domain_ops;
+static const struct irq_domain_ops *sgi_domain_ops;
 
 int its_alloc_vcpu_irqs(struct its_vm *vm)
 {
@@ -216,12 +217,15 @@ int its_prop_update_vlpi(int irq, u8 config, bool inv)
 	return irq_set_vcpu_affinity(irq, &info);
 }
 
-int its_init_v4(struct irq_domain *domain, const struct irq_domain_ops *ops)
+int its_init_v4(struct irq_domain *domain,
+		const struct irq_domain_ops *vpe_ops,
+		const struct irq_domain_ops *sgi_ops)
 {
 	if (domain) {
 		pr_info("ITS: Enabling GICv4 support\n");
 		gic_domain = domain;
-		vpe_domain_ops = ops;
+		vpe_domain_ops = vpe_ops;
+		sgi_domain_ops = sgi_ops;
 		return 0;
 	}
 
diff --git a/include/linux/irqchip/arm-gic-v4.h b/include/linux/irqchip/arm-gic-v4.h
index 439963f4c66a..44e8c19e3d56 100644
--- a/include/linux/irqchip/arm-gic-v4.h
+++ b/include/linux/irqchip/arm-gic-v4.h
@@ -49,6 +49,11 @@ struct its_vpe {
 		};
 		/* GICv4.1 implementations */
 		struct {
+			struct {
+				u8	priority;
+				bool	enabled;
+				bool	group;
+			}			sgi_config[16];
 			atomic_t vmapp_count;
 		};
 	};
@@ -123,6 +128,8 @@ int its_unmap_vlpi(int irq);
 int its_prop_update_vlpi(int irq, u8 config, bool inv);
 
 struct irq_domain_ops;
-int its_init_v4(struct irq_domain *domain, const struct irq_domain_ops *ops);
+int its_init_v4(struct irq_domain *domain,
+		const struct irq_domain_ops *vpe_ops,
+		const struct irq_domain_ops *sgi_ops);
 
 #endif
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2020-03-20 18:24 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 18:23 [PATCH v6 00/23] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 01/23] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 02/23] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 03/23] irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 04/23] irqchip/gic-v4.1: Wait for completion of redistributor's INVALL operation Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 05/23] irqchip/gic-v4.1: Ensure mutual exclusion betwen invalidations on the same RD Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 06/23] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 07/23] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-03-20 18:23 ` Marc Zyngier [this message]
2020-03-24  2:27   ` [PATCH v6 08/23] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Zenghui Yu
2020-03-24 12:14     ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 09/23] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 10/23] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 11/23] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 12/23] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 13/23] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 14/23] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-03-24  2:43   ` Zenghui Yu
2020-03-24 12:35     ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 15/23] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 16/23] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 17/23] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 18/23] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 19/23] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 20/23] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 21/23] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 22/23] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 23/23] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320182406.23465-9-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).