From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org,
Wanpeng Li <wanpengli@tencent.com>,
Janosch Frank <frankja@linux.ibm.com>,
kvm@vger.kernel.org, David Hildenbrand <david@redhat.com>,
Marc Zyngier <maz@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Cornelia Huck <cohuck@redhat.com>,
linux-mips@vger.kernel.org,
Sean Christopherson <sean.j.christopherson@intel.com>,
linux-kernel@vger.kernel.org, Paul Mackerras <paulus@ozlabs.org>,
Christian Borntraeger <borntraeger@de.ibm.com>,
kvm-ppc@vger.kernel.org, Vitaly Kuznetsov <vkuznets@redhat.com>,
kvmarm@lists.cs.columbia.edu, Jim Mattson <jmattson@google.com>
Subject: [PATCH v3 2/9] KVM: x86: Move init-only kvm_x86_ops to separate struct
Date: Sat, 21 Mar 2020 13:25:56 -0700 [thread overview]
Message-ID: <20200321202603.19355-3-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200321202603.19355-1-sean.j.christopherson@intel.com>
Move the kvm_x86_ops functions that are used only within the scope of
kvm_init() into a separate struct, kvm_x86_init_ops. In addition to
identifying the init-only functions without restorting to code comments,
this also sets the stage for waiting until after ->hardware_setup() to
set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is
desirable as many of the hooks are not usable until ->hardware_setup()
completes.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/include/asm/kvm_host.h | 13 +++++++++----
arch/x86/kvm/svm.c | 15 ++++++++++-----
arch/x86/kvm/vmx/vmx.c | 16 +++++++++++-----
arch/x86/kvm/x86.c | 10 ++++++----
4 files changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9a183e9d4cb1..f4c5b49299ff 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1054,12 +1054,8 @@ static inline u16 kvm_lapic_irq_dest_mode(bool dest_mode_logical)
}
struct kvm_x86_ops {
- int (*cpu_has_kvm_support)(void); /* __init */
- int (*disabled_by_bios)(void); /* __init */
int (*hardware_enable)(void);
void (*hardware_disable)(void);
- int (*check_processor_compatibility)(void);/* __init */
- int (*hardware_setup)(void); /* __init */
void (*hardware_unsetup)(void); /* __exit */
bool (*cpu_has_accelerated_tpr)(void);
bool (*has_emulated_msr)(int index);
@@ -1260,6 +1256,15 @@ struct kvm_x86_ops {
int (*enable_direct_tlbflush)(struct kvm_vcpu *vcpu);
};
+struct kvm_x86_init_ops {
+ int (*cpu_has_kvm_support)(void);
+ int (*disabled_by_bios)(void);
+ int (*check_processor_compatibility)(void);
+ int (*hardware_setup)(void);
+
+ struct kvm_x86_ops *runtime_ops;
+};
+
struct kvm_arch_async_pf {
u32 token;
gfn_t gfn;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 2125c6ae5951..33e67c3389c2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -7351,11 +7351,7 @@ static void svm_pre_update_apicv_exec_ctrl(struct kvm *kvm, bool activate)
}
static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
- .cpu_has_kvm_support = has_svm,
- .disabled_by_bios = is_disabled,
- .hardware_setup = svm_hardware_setup,
.hardware_unsetup = svm_hardware_teardown,
- .check_processor_compatibility = svm_check_processor_compat,
.hardware_enable = svm_hardware_enable,
.hardware_disable = svm_hardware_disable,
.cpu_has_accelerated_tpr = svm_cpu_has_accelerated_tpr,
@@ -7480,9 +7476,18 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
.check_nested_events = svm_check_nested_events,
};
+static struct kvm_x86_init_ops svm_init_ops __initdata = {
+ .cpu_has_kvm_support = has_svm,
+ .disabled_by_bios = is_disabled,
+ .hardware_setup = svm_hardware_setup,
+ .check_processor_compatibility = svm_check_processor_compat,
+
+ .runtime_ops = &svm_x86_ops,
+};
+
static int __init svm_init(void)
{
- return kvm_init(&svm_x86_ops, sizeof(struct vcpu_svm),
+ return kvm_init(&svm_init_ops, sizeof(struct vcpu_svm),
__alignof__(struct vcpu_svm), THIS_MODULE);
}
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 07299a957d4a..ffcdcc86f5b7 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7842,11 +7842,8 @@ static bool vmx_check_apicv_inhibit_reasons(ulong bit)
}
static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
- .cpu_has_kvm_support = cpu_has_kvm_support,
- .disabled_by_bios = vmx_disabled_by_bios,
- .hardware_setup = hardware_setup,
.hardware_unsetup = hardware_unsetup,
- .check_processor_compatibility = vmx_check_processor_compat,
+
.hardware_enable = hardware_enable,
.hardware_disable = hardware_disable,
.cpu_has_accelerated_tpr = report_flexpriority,
@@ -7981,6 +7978,15 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
.apic_init_signal_blocked = vmx_apic_init_signal_blocked,
};
+static struct kvm_x86_init_ops vmx_init_ops __initdata = {
+ .cpu_has_kvm_support = cpu_has_kvm_support,
+ .disabled_by_bios = vmx_disabled_by_bios,
+ .check_processor_compatibility = vmx_check_processor_compat,
+ .hardware_setup = hardware_setup,
+
+ .runtime_ops = &vmx_x86_ops,
+};
+
static void vmx_cleanup_l1d_flush(void)
{
if (vmx_l1d_flush_pages) {
@@ -8065,7 +8071,7 @@ static int __init vmx_init(void)
}
#endif
- r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx),
+ r = kvm_init(&vmx_init_ops, sizeof(struct vcpu_vmx),
__alignof__(struct vcpu_vmx), THIS_MODULE);
if (r)
return r;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0f08e1b4e762..20f989d1bba8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7298,8 +7298,8 @@ static struct notifier_block pvclock_gtod_notifier = {
int kvm_arch_init(void *opaque)
{
+ struct kvm_x86_init_ops *ops = opaque;
int r;
- struct kvm_x86_ops *ops = opaque;
if (kvm_x86_ops) {
printk(KERN_ERR "kvm: already loaded the other module\n");
@@ -7354,7 +7354,7 @@ int kvm_arch_init(void *opaque)
if (r)
goto out_free_percpu;
- kvm_x86_ops = ops;
+ kvm_x86_ops = ops->runtime_ops;
kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
PT_DIRTY_MASK, PT64_NX_MASK, 0,
@@ -9623,6 +9623,7 @@ void kvm_arch_hardware_disable(void)
int kvm_arch_hardware_setup(void *opaque)
{
+ struct kvm_x86_init_ops *ops = opaque;
int r;
rdmsrl_safe(MSR_EFER, &host_efer);
@@ -9630,7 +9631,7 @@ int kvm_arch_hardware_setup(void *opaque)
if (boot_cpu_has(X86_FEATURE_XSAVES))
rdmsrl(MSR_IA32_XSS, host_xss);
- r = kvm_x86_ops->hardware_setup();
+ r = ops->hardware_setup();
if (r != 0)
return r;
@@ -9665,13 +9666,14 @@ void kvm_arch_hardware_unsetup(void)
int kvm_arch_check_processor_compat(void *opaque)
{
struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+ struct kvm_x86_init_ops *ops = opaque;
WARN_ON(!irqs_disabled());
if (kvm_host_cr4_reserved_bits(c) != cr4_reserved_bits)
return -EIO;
- return kvm_x86_ops->check_processor_compatibility();
+ return ops->check_processor_compatibility();
}
bool kvm_vcpu_is_reset_bsp(struct kvm_vcpu *vcpu)
--
2.24.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2020-03-21 20:26 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 20:25 [PATCH v3 0/9] KVM: Move x86 init ops to separate struct Sean Christopherson
2020-03-21 20:25 ` [PATCH v3 1/9] KVM: Pass kvm_init()'s opaque param to additional arch funcs Sean Christopherson
2020-03-24 1:18 ` Paul Mackerras
2020-03-21 20:25 ` Sean Christopherson [this message]
2020-03-23 12:10 ` [PATCH v3 2/9] KVM: x86: Move init-only kvm_x86_ops to separate struct Vitaly Kuznetsov
2020-03-23 15:29 ` Sean Christopherson
2020-03-23 16:24 ` Vitaly Kuznetsov
2020-03-23 16:31 ` Sean Christopherson
2020-03-23 19:47 ` Paolo Bonzini
2020-03-21 20:25 ` [PATCH v3 3/9] KVM: VMX: Move hardware_setup() definition below vmx_x86_ops Sean Christopherson
2020-03-23 12:12 ` Vitaly Kuznetsov
2020-03-21 20:25 ` [PATCH v3 4/9] KVM: VMX: Configure runtime hooks using vmx_x86_ops Sean Christopherson
2020-03-23 12:27 ` Vitaly Kuznetsov
2020-03-23 16:23 ` Sean Christopherson
2020-03-23 20:00 ` Paolo Bonzini
2020-03-21 20:25 ` [PATCH v3 5/9] KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes Sean Christopherson
2020-03-21 20:26 ` [PATCH v3 6/9] KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Sean Christopherson
2020-03-23 12:44 ` Vitaly Kuznetsov
2020-03-23 15:38 ` Sean Christopherson
2020-03-21 20:26 ` [PATCH v3 7/9] KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() Sean Christopherson
2020-03-23 12:46 ` Vitaly Kuznetsov
2020-03-21 20:26 ` [PATCH v3 8/9] KVM: VMX: Annotate vmx_x86_ops as __initdata Sean Christopherson
2020-03-23 12:48 ` Vitaly Kuznetsov
2020-03-21 20:26 ` [PATCH v3 9/9] KVM: SVM: Annotate svm_x86_ops " Sean Christopherson
2020-03-23 12:48 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200321202603.19355-3-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=maz@kernel.org \
--cc=paulus@ozlabs.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).