kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <maz@kernel.org>
Subject: [PATCH 3/5] KVM: arm64: Move ACTLR_EL1 emulation to the sys_reg_descs array
Date: Mon, 22 Jun 2020 11:33:15 +0000	[thread overview]
Message-ID: <20200622113317.20477-4-james.morse@arm.com> (raw)
In-Reply-To: <20200622113317.20477-1-james.morse@arm.com>

The only entry in the genericv8_sys_regs arrays is for emulation of
ACTLR_EL1. As all targets emulate this in the same way, move it to
sys_reg_descs[].

Signed-off-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kvm/sys_regs.c            | 28 ++++++++++++++++++++++++++
 arch/arm64/kvm/sys_regs_generic_v8.c | 30 ----------------------------
 2 files changed, 28 insertions(+), 30 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index fb448bfc83ec..f8407cfa9032 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -242,6 +242,25 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static bool access_actlr(struct kvm_vcpu *vcpu,
+			 struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	p->regval = vcpu_read_sys_reg(vcpu, ACTLR_EL1);
+
+	if (p->is_aarch32) {
+		if (r->Op2 & 2)
+			p->regval = upper_32_bits(p->regval);
+		else
+			p->regval = lower_32_bits(p->regval);
+	}
+
+	return true;
+}
+
 /*
  * Trap handler for the GICv3 SGI generation system register.
  * Forward the request to the VGIC emulation.
@@ -615,6 +634,12 @@ static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	vcpu_write_sys_reg(vcpu, amair, AMAIR_EL1);
 }
 
+static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 actlr = read_sysreg(actlr_el1);
+	vcpu_write_sys_reg(vcpu, actlr, ACTLR_EL1);
+}
+
 static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 mpidr;
@@ -1518,6 +1543,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_UNALLOCATED(7,7),
 
 	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
+	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
 	{ SYS_DESC(SYS_ZCR_EL1), NULL, reset_val, ZCR_EL1, 0, .visibility = sve_visibility },
 	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1957,6 +1983,8 @@ static const struct sys_reg_desc cp14_64_regs[] = {
 static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 0), Op2( 1), access_ctr },
 	{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), access_vm_reg, NULL, c1_SCTLR },
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 1), access_actlr },
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 3), access_actlr },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index a82cc2ccfd44..a7e21e61beea 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -19,44 +19,14 @@
 
 #include "sys_regs.h"
 
-static bool access_actlr(struct kvm_vcpu *vcpu,
-			 struct sys_reg_params *p,
-			 const struct sys_reg_desc *r)
-{
-	if (p->is_write)
-		return ignore_write(vcpu, p);
-
-	p->regval = vcpu_read_sys_reg(vcpu, ACTLR_EL1);
-
-	if (p->is_aarch32) {
-		if (r->Op2 & 2)
-			p->regval = upper_32_bits(p->regval);
-		else
-			p->regval = lower_32_bits(p->regval);
-	}
-
-	return true;
-}
-
-static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
-{
-	__vcpu_sys_reg(vcpu, ACTLR_EL1) = read_sysreg(actlr_el1);
-}
-
 /*
  * Implementation specific sys-reg registers.
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
  */
 static const struct sys_reg_desc genericv8_sys_regs[] = {
-	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 };
 
 static const struct sys_reg_desc genericv8_cp15_regs[] = {
-	/* ACTLR */
-	{ Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b001),
-	  access_actlr },
-	{ Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b011),
-	  access_actlr },
 };
 
 struct kvm_sys_reg_target_table genericv8_target_table = {
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2020-06-22 11:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22 11:33 [PATCH 0/5] KVM: arm64: Remove the target table James Morse
2020-06-22 11:33 ` [PATCH 1/5] KVM: arm64: Drop the target_table[] indirection James Morse
2020-06-22 11:33 ` [PATCH 2/5] KVM: arm64: Tolerate an empty target_table list James Morse
2020-06-22 11:33 ` James Morse [this message]
2020-06-22 11:33 ` [PATCH 4/5] KVM: arm64: Remove target_table from exit handlers James Morse
2020-06-22 11:33 ` [PATCH 5/5] KVM: arm64: Remove the target table James Morse
2020-07-05 17:51 ` [PATCH 0/5] " Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622113317.20477-4-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).