kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: David Brazdil <dbrazdil@google.com>
To: kvmarm@lists.cs.columbia.edu
Cc: kernel-team@android.com,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Walbran <qwandor@google.com>,
	Marc Zyngier <maz@kernel.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	Tejun Heo <tj@kernel.org>, Dennis Zhou <dennis@kernel.org>,
	Christoph Lameter <cl@linux.com>, Will Deacon <will@kernel.org>
Subject: [PATCH v2 16/24] kvm: arm64: Extract __do_hyp_init into a helper function
Date: Mon, 16 Nov 2020 20:43:10 +0000	[thread overview]
Message-ID: <20201116204318.63987-17-dbrazdil@google.com> (raw)
In-Reply-To: <20201116204318.63987-1-dbrazdil@google.com>

In preparation for adding a CPU entry point in nVHE hyp code, extract
most of __do_hyp_init hypervisor initialization code into a common
helper function. This will be invoked by the entry point to install KVM
on the newly booted CPU.

Signed-off-by: David Brazdil <dbrazdil@google.com>
---
 arch/arm64/kvm/hyp/nvhe/hyp-init.S | 39 +++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index 67342cc9930f..d4a71ac34254 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -68,16 +68,35 @@ __do_hyp_init:
 	mov	x0, #SMCCC_RET_NOT_SUPPORTED
 	eret
 
-1:	ldr	x0, [x1, #NVHE_INIT_TPIDR_EL2]
-	msr	tpidr_el2, x0
+1:	mov	x0, x1
+	mov	x4, lr
+	bl	___kvm_hyp_init
+	mov	lr, x4
 
-	ldr	x0, [x1, #NVHE_INIT_VECTOR_HYP_VA]
-	msr	vbar_el2, x0
+	/* Hello, World! */
+	mov	x0, #SMCCC_RET_SUCCESS
+	eret
+SYM_CODE_END(__kvm_hyp_init)
+
+/*
+ * Initialize the hypervisor in EL2.
+ *
+ * Only uses x0..x3 so as to not clobber callee-saved SMCCC registers
+ * and leave x4 for the caller.
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ */
+SYM_CODE_START(___kvm_hyp_init)
+	ldr	x1, [x0, #NVHE_INIT_TPIDR_EL2]
+	msr	tpidr_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_VECTOR_HYP_VA]
+	msr	vbar_el2, x1
 
-	ldr	x0, [x1, #NVHE_INIT_STACK_HYP_VA]
-	mov	sp, x0
+	ldr	x1, [x0, #NVHE_INIT_STACK_HYP_VA]
+	mov	sp, x1
 
-	ldr	x1, [x1, #NVHE_INIT_PGD_PA]
+	ldr	x1, [x0, #NVHE_INIT_PGD_PA]
 	phys_to_ttbr x0, x1
 alternative_if ARM64_HAS_CNP
 	orr	x0, x0, #TTBR_CNP_BIT
@@ -137,10 +156,8 @@ alternative_else_nop_endif
 	msr	sctlr_el2, x0
 	isb
 
-	/* Hello, World! */
-	mov	x0, #SMCCC_RET_SUCCESS
-	eret
-SYM_CODE_END(__kvm_hyp_init)
+	ret
+SYM_CODE_END(___kvm_hyp_init)
 
 SYM_CODE_START(__kvm_handle_stub_hvc)
 	cmp	x0, #HVC_SOFT_RESTART
-- 
2.29.2.299.gdc1121823c-goog

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2020-11-16 20:44 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-16 20:42 [PATCH v2 00/24] Opt-in always-on nVHE hypervisor David Brazdil
2020-11-16 20:42 ` [PATCH v2 01/24] psci: Support psci_ops.get_version for v0.1 David Brazdil
2020-11-16 20:42 ` [PATCH v2 02/24] psci: Accessor for configured PSCI function IDs David Brazdil
2020-11-23 13:47   ` Marc Zyngier
2020-11-16 20:42 ` [PATCH v2 03/24] arm64: Make cpu_logical_map() take unsigned int David Brazdil
2020-11-16 20:42 ` [PATCH v2 04/24] arm64: Move MAIR_EL1_SET to asm/memory.h David Brazdil
2020-11-23 13:52   ` Marc Zyngier
2020-11-25 10:31     ` David Brazdil
2020-11-25 11:21       ` Marc Zyngier
2020-11-25 13:26         ` David Brazdil
2020-11-25 13:33           ` Marc Zyngier
2020-11-16 20:42 ` [PATCH v2 05/24] kvm: arm64: Initialize MAIR_EL2 using a constant David Brazdil
2020-11-16 20:43 ` [PATCH v2 06/24] kvm: arm64: Move hyp-init params to a per-CPU struct David Brazdil
2020-11-23 14:20   ` Marc Zyngier
2020-11-25 10:39     ` David Brazdil
2020-11-25 10:49       ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 07/24] kvm: arm64: Refactor handle_trap to use a switch David Brazdil
2020-11-23 14:32   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 08/24] kvm: arm64: Add SMC handler in nVHE EL2 David Brazdil
2020-11-23 18:00   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 09/24] kvm: arm64: Add .hyp.data..ro_after_init ELF section David Brazdil
2020-11-16 20:43 ` [PATCH v2 10/24] kvm: arm64: Support per_cpu_ptr in nVHE hyp code David Brazdil
2020-11-16 20:43 ` [PATCH v2 11/24] kvm: arm64: Create nVHE copy of cpu_logical_map David Brazdil
2020-11-16 20:43 ` [PATCH v2 12/24] kvm: arm64: Bootstrap PSCI SMC handler in nVHE EL2 David Brazdil
2020-11-23 17:55   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 13/24] kvm: arm64: Add offset for hyp VA <-> PA conversion David Brazdil
2020-11-16 20:43 ` [PATCH v2 14/24] kvm: arm64: Forward safe PSCI SMCs coming from host David Brazdil
2020-11-16 20:43 ` [PATCH v2 15/24] kvm: arm64: Extract parts of el2_setup into a macro David Brazdil
2020-11-23 15:27   ` Marc Zyngier
2020-11-25 12:57     ` David Brazdil
2020-11-16 20:43 ` David Brazdil [this message]
2020-11-16 20:43 ` [PATCH v2 17/24] kvm: arm64: Add CPU entry point in nVHE hyp David Brazdil
2020-11-16 20:43 ` [PATCH v2 18/24] kvm: arm64: Add function to enter host from KVM nVHE hyp code David Brazdil
2020-11-16 20:43 ` [PATCH v2 19/24] kvm: arm64: Intercept host's PSCI_CPU_ON SMCs David Brazdil
2020-11-23 17:04   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 20/24] kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs David Brazdil
2020-11-23 17:22   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 21/24] kvm: arm64: Add kvm-arm.protected early kernel parameter David Brazdil
2020-11-23 17:30   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 22/24] kvm: arm64: Keep nVHE EL2 vector installed David Brazdil
2020-11-16 20:43 ` [PATCH v2 23/24] kvm: arm64: Trap host SMCs in protected mode David Brazdil
2020-11-23 17:36   ` Marc Zyngier
2020-11-16 20:43 ` [PATCH v2 24/24] kvm: arm64: Fix EL2 mode availability checks David Brazdil
2020-11-23 13:44 ` [PATCH v2 00/24] Opt-in always-on nVHE hypervisor Marc Zyngier
2020-11-23 18:01 ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201116204318.63987-17-dbrazdil@google.com \
    --to=dbrazdil@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=cl@linux.com \
    --cc=dennis@kernel.org \
    --cc=kernel-team@android.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=qwandor@google.com \
    --cc=tj@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).