KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Auger Eric <eric.auger@redhat.com>
To: Andre Przywara <andre.przywara@arm.com>,
	Andrew Jones <drjones@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org
Subject: Re: [kvm-unit-tests PATCH 01/17] arm: gic: Enable GIC MMIO tests for GICv3 as well
Date: Tue, 12 Nov 2019 13:49:41 +0100
Message-ID: <ee75ee48-c774-c2d8-2156-f9ed256733e6@redhat.com> (raw)
In-Reply-To: <20191108144240.204202-2-andre.przywara@arm.com>

Hi Andre,

On 11/8/19 3:42 PM, Andre Przywara wrote:
> So far the GIC MMIO tests were only enabled for a GICv2 guest. Modern
> machines tend to have a GICv3-only GIC, so can't run those tests.
> It turns out that most GIC distributor registers we test in the unit
> tests are actually the same in GICv3, so we can just enable those tests
> for GICv3 guests as well.
> The only exception is the CPU number in the TYPER register, which is
> only valid in the GICv2 compat mode (ARE=0), which KVM does not support.
> So we protect this test against running on a GICv3 guest.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  arm/gic.c            | 13 +++++++++++--
>  arm/unittests.cfg    | 26 ++++++++++++++++++++++----
>  lib/arm/asm/gic-v3.h |  2 ++
>  3 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/arm/gic.c b/arm/gic.c
> index adb6aa4..04b3337 100644
> --- a/arm/gic.c
> +++ b/arm/gic.c
> @@ -6,6 +6,7 @@
>   *   + MMIO access tests
>   * GICv3
>   *   + test sending/receiving IPIs
> + *   + MMIO access tests
>   *
>   * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@redhat.com>
>   *
> @@ -496,7 +497,14 @@ static void gic_test_mmio(void)
>  		idreg = gic_dist_base + GICD_ICPIDR2;
>  		break;
>  	case 0x3:
> -		report_abort("GICv3 MMIO tests NYI");
> +		/*
> +		 * We only test generic registers or those affecting
> +		 * SPIs, so don't need to consider the SGI base in
> +		 * the redistributor here.
> +		 */
> +		gic_dist_base = gicv3_dist_base();
> +		idreg = gic_dist_base + GICD_PIDR2;
> +		break;
>  	default:
>  		report_abort("GIC version %d not supported", gic_version());
>  	}
> @@ -505,7 +513,8 @@ static void gic_test_mmio(void)
>  	nr_irqs = GICD_TYPER_IRQS(reg);
>  	report_info("number of implemented SPIs: %d", nr_irqs - GIC_FIRST_SPI);
>  
> -	test_typer_v2(reg);
> +	if (gic_version() == 0x2)
> +		test_typer_v2(reg);

nit: reports mention ICPIDR2 independently on the version.

	report("ICPIDR2 is read-only", test_readonly_32(idreg, false));
	report_info("value of ICPIDR2: 0x%08x", reg);

>  
>  	report_info("IIDR: 0x%08x", readl(gic_dist_base + GICD_IIDR));
>  
> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> index daeb5a0..12ac142 100644
> --- a/arm/unittests.cfg
> +++ b/arm/unittests.cfg
> @@ -86,28 +86,46 @@ smp = $((($MAX_SMP < 8)?$MAX_SMP:8))
>  extra_params = -machine gic-version=2 -append 'ipi'
>  groups = gic
>  
> -[gicv2-mmio]
> +[gicv3-ipi]
> +file = gic.flat
> +smp = $MAX_SMP
> +extra_params = -machine gic-version=3 -append 'ipi'
> +groups = gic
> +
> +[gicv2-max-mmio]
>  file = gic.flat
>  smp = $((($MAX_SMP < 8)?$MAX_SMP:8))
>  extra_params = -machine gic-version=2 -append 'mmio'
>  groups = gic
>  
> +[gicv3-max-mmio]
> +file = gic.flat
> +smp = $MAX_SMP
> +extra_params = -machine gic-version=3 -append 'mmio'
> +groups = gic
> +
>  [gicv2-mmio-up]
>  file = gic.flat
>  smp = 1
>  extra_params = -machine gic-version=2 -append 'mmio'
>  groups = gic
>  
> +[gicv3-mmio-up]
> +file = gic.flat
> +smp = 1
> +extra_params = -machine gic-version=3 -append 'mmio'
> +groups = gic
> +
>  [gicv2-mmio-3p]
>  file = gic.flat
>  smp = $((($MAX_SMP < 3)?$MAX_SMP:3))
>  extra_params = -machine gic-version=2 -append 'mmio'
>  groups = gic
>  
> -[gicv3-ipi]
> +[gicv3-mmio-3p]
>  file = gic.flat
> -smp = $MAX_SMP
> -extra_params = -machine gic-version=3 -append 'ipi'
> +smp = $((($MAX_SMP < 3)?$MAX_SMP:3))
why do we keep this smp computation?
> +extra_params = -machine gic-version=2 -append 'mmio'
gic-version=3
>  groups = gic
>  
>  [gicv2-active]
> diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
> index 347be2f..ed6a5ad 100644
> --- a/lib/arm/asm/gic-v3.h
> +++ b/lib/arm/asm/gic-v3.h
> @@ -23,6 +23,8 @@
>  #define GICD_CTLR_ENABLE_G1A		(1U << 1)
>  #define GICD_CTLR_ENABLE_G1		(1U << 0)
>  
> +#define GICD_PIDR2			0xffe8
> +
>  /* Re-Distributor registers, offsets from RD_base */
>  #define GICR_TYPER			0x0008
>  
>

Otherwise Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-08 14:42 [kvm-unit-tests PATCH 00/17] arm: gic: Test SPIs and interrupt groups Andre Przywara
2019-11-08 14:42 ` [kvm-unit-tests PATCH 01/17] arm: gic: Enable GIC MMIO tests for GICv3 as well Andre Przywara
2019-11-08 17:28   ` Alexandru Elisei
2019-11-12 12:49   ` Auger Eric [this message]
2019-11-08 14:42 ` [kvm-unit-tests PATCH 02/17] arm: gic: Generalise function names Andre Przywara
2019-11-12 11:11   ` Alexandru Elisei
2019-11-12 12:49   ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 03/17] arm: gic: Provide per-IRQ helper functions Andre Przywara
2019-11-12 12:51   ` Alexandru Elisei
2019-11-12 15:53     ` Auger Eric
2019-11-12 16:53       ` Alexandru Elisei
2019-11-12 13:49   ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 04/17] arm: gic: Support no IRQs test case Andre Przywara
2019-11-12 13:26   ` Alexandru Elisei
2019-11-12 21:14     ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 05/17] arm: gic: Prepare IRQ handler for handling SPIs Andre Przywara
2019-11-12 13:36   ` Alexandru Elisei
2019-11-12 20:56   ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 06/17] arm: gic: Add simple shared IRQ test Andre Przywara
2019-11-12 13:54   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 07/17] arm: gic: Extend check_acked() to allow silent call Andre Przywara
2019-11-12 15:23   ` Alexandru Elisei
2019-11-14 12:32     ` Andrew Jones
2019-11-15 11:32       ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 08/17] arm: gic: Add simple SPI MP test Andre Przywara
2019-11-12 15:41   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 09/17] arm: gic: Add test for flipping GICD_CTLR.DS Andre Przywara
2019-11-12 16:42   ` Alexandru Elisei
2019-11-14 13:39     ` Vladimir Murzin
2019-11-14 14:17       ` Andre Przywara
2019-11-14 14:50         ` Vladimir Murzin
2019-11-14 15:21           ` Alexandru Elisei
2019-11-14 15:27             ` Peter Maydell
2019-11-14 15:47               ` Alexandru Elisei
2019-11-14 15:56                 ` Peter Maydell
2019-11-08 14:42 ` [kvm-unit-tests PATCH 10/17] arm: gic: Check for writable IGROUPR registers Andre Przywara
2019-11-12 16:51   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 11/17] arm: gic: Check for validity of both group enable bits Andre Przywara
2019-11-12 16:58   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 12/17] arm: gic: Change gic_read_iar() to take group parameter Andre Przywara
2019-11-12 17:19   ` Alexandru Elisei
2019-11-14 12:50     ` Andrew Jones
2019-11-08 14:42 ` [kvm-unit-tests PATCH 13/17] arm: gic: Change write_eoir() " Andre Przywara
2019-11-08 14:42 ` [kvm-unit-tests PATCH 14/17] arm: gic: Prepare for receiving GIC group 0 interrupts via FIQs Andre Przywara
2019-11-12 17:30   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 15/17] arm: gic: Provide FIQ handler Andre Przywara
2019-11-13 10:14   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 16/17] arm: gic: Prepare interrupt statistics for both groups Andre Przywara
2019-11-13 10:44   ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 17/17] arm: gic: Test Group0 SPIs Andre Przywara
2019-11-13 11:26   ` Alexandru Elisei

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ee75ee48-c774-c2d8-2156-f9ed256733e6@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=andre.przywara@arm.com \
    --cc=drjones@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git