* [GIT PULL] Power management updates for v5.3-rc1
@ 2019-07-08 21:36 Rafael J. Wysocki
2019-07-09 18:05 ` pr-tracker-bot
0 siblings, 1 reply; 2+ messages in thread
From: Rafael J. Wysocki @ 2019-07-08 21:36 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux PM, ACPI Devel Maling List, Linux PCI, Linux Kernel Mailing List
Hi Linus,
Please pull from the tag
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-5.3-rc1
with top-most commit 586a07dca8c51b966960d1f0d8be9c27d7e0a95c
Merge branch 'pm-cpufreq'
on top of commit 6fbc7275c7a9ba97877050335f290341a1fd8dbf
Linux 5.2-rc7
to receive power management updates for 5.3-rc1.
These update PCI and ACPI power management (improved handling of
ACPI power resources and PCIe link delays, fixes related to corner
cases, hibernation handling rework), fix and extend the operating
performance points (OPP) framework, add new cpufreq drivers for
Raspberry Pi and imx8m chips, update some other cpufreq drivers,
clean up assorted pieces of PM code and documentation and update
tools.
Specifics:
- Improve the handling of shared ACPI power resources in the PCI
bus type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec
into account as appropriate and avoid polling devices in D3cold
for PME (Mika Westerberg).
- Fix some corner case issues in ACPI device power management and
in the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210,
and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli,
Paweł Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black).
Thanks!
---------------
Abhishek Goel (1):
cpupower : frequency-set -r option misses the last cpu in related cpu list
Andy Shevchenko (1):
ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
Bart Van Assche (1):
PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
Daniel Lezcano (1):
cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub
David Arcari (1):
cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered
Dexuan Cui (1):
ACPI: PM: Make acpi_sleep_state_supported() non-static
Dmitry Osipenko (1):
opp: Don't use IS_ERR on invalid supplies
Florian Fainelli (2):
cpufreq: brcmstb-avs-cpufreq: Fix initial command check
cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
Fuqian Huang (1):
kernel: power: swap: use kzalloc() instead of kmalloc() followed
by memset()
Geert Uytterhoeven (2):
PM / clk: Remove error message on out-of-memory condition
Documentation: ABI: power: Add missing newline at end of file
Greg Kroah-Hartman (2):
power: avs: smartreflex: no need to check return value of
debugfs_create functions
drivers: base: power: remove wakeup_sources_stats_dentry variable
Kefeng Wang (1):
drivers: base: power: clock_ops: Use of_clk_get_parent_count()
Lenny Szubowicz (1):
ACPI / LPIT: Correct LPIT end address for lpit_process()
Leonard Crestez (5):
cpufreq: Add imx-cpufreq-dt driver
dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
cpufreq: imx-cpufreq-dt: Remove global platform match list
cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
Mathieu Malaterre (1):
PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
Mika Westerberg (5):
PCI: Add missing link delays required by the PCIe spec
PCI: Do not poll for PME if the device is in D3cold
PCI / ACPI: Use cached ACPI device state to get PCI device power state
ACPI / PM: Introduce concept of a _PR0 dependent device
PCI / ACPI: Add _PR0 dependent devices
Nick Black (1):
cpupower: correct spelling of interval
Nicolas Saenz Julienne (1):
cpufreq: add driver for Raspberry Pi
Paweł Chmiel (1):
cpufreq: s5pv210: Don't flood kernel log after cpufreq change
Rafael J. Wysocki (14):
PCI: PM: Avoid resuming devices in D3hot during system suspend
PCI: PM: Replace pci_dev_keep_suspended() with two functions
PM: suspend: Rename pm_suspend_via_s2idle()
PM: sleep: Update struct wakeup_source documentation
ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
ACPI: PM: Allow transitions to D0 to occur in special cases
PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
PM: ACPI/PCI: Resume all devices during hibernation
PCI: PM: Simplify bus-level hibernation callbacks
ACPI: PM: Simplify and fix PM domain hibernation callbacks
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Drop unused function and function header
ACPI: PM: Unexport acpi_device_get_power()
PM: sleep: Drop dev_pm_skip_next_resume_phases()
Rajendra Nayak (1):
opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes
Stephen Boyd (1):
opp: Don't overwrite rounded clk rate
Todd Brandt (3):
Update to pm-graph 5.3
Update to pm-graph 5.4
Add README and update pm-graph and sleepgraph docs
Viresh Kumar (7):
opp: Attach genpds to devices from within OPP core
opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd()
cpufreq: Remove redundant !setpolicy check
cpufreq: Use has_target() instead of !setpolicy
cpufreq: Don't skip frequency validation for has_target() drivers
cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
YueHaibing (1):
cpufreq: armada-37xx: Remove set but not used variable 'freq'
---------------
Documentation/ABI/testing/sysfs-power | 2 +-
.../devicetree/bindings/cpufreq/imx-cpufreq-dt.txt | 37 +
arch/powerpc/kernel/suspend.c | 1 +
arch/s390/kernel/entry.h | 1 -
drivers/acpi/acpi_lpit.c | 7 +-
drivers/acpi/acpi_lpss.c | 111 ++-
drivers/acpi/device_pm.c | 165 ++--
drivers/acpi/internal.h | 7 +
drivers/acpi/power.c | 135 ++++
drivers/acpi/sleep.c | 22 +-
drivers/base/power/clock_ops.c | 6 +-
drivers/base/power/main.c | 36 +-
drivers/base/power/wakeup.c | 6 +-
drivers/cpufreq/Kconfig.arm | 17 +
drivers/cpufreq/Makefile | 2 +
drivers/cpufreq/armada-37xx-cpufreq.c | 4 +-
drivers/cpufreq/brcmstb-avs-cpufreq.c | 12 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 5 +-
drivers/cpufreq/cpufreq.c | 121 ++-
drivers/cpufreq/imx-cpufreq-dt.c | 97 +++
drivers/cpufreq/pcc-cpufreq.c | 4 +-
drivers/cpufreq/raspberrypi-cpufreq.c | 97 +++
drivers/cpufreq/s5pv210-cpufreq.c | 2 +-
drivers/input/serio/i8042.c | 2 +-
drivers/opp/core.c | 174 +++--
drivers/opp/of.c | 30 +-
drivers/pci/pci-acpi.c | 14 +-
drivers/pci/pci-driver.c | 74 +-
drivers/pci/pci.c | 116 ++-
drivers/pci/pci.h | 8 +-
drivers/pci/pcie/portdrv_core.c | 66 ++
drivers/power/avs/smartreflex.c | 41 +-
drivers/soc/imx/soc-imx8.c | 3 +
include/acpi/acpi_bus.h | 11 +-
include/linux/acpi.h | 14 +-
include/linux/cpufreq.h | 6 +
include/linux/pm.h | 1 -
include/linux/pm_opp.h | 8 +-
include/linux/pm_wakeup.h | 2 +-
include/linux/suspend.h | 5 +-
kernel/power/power.h | 2 -
kernel/power/suspend.c | 6 +-
kernel/power/swap.c | 3 +-
tools/power/cpupower/man/cpupower-monitor.1 | 2 +-
tools/power/cpupower/po/cs.po | 2 +-
tools/power/cpupower/po/de.po | 2 +-
tools/power/cpupower/po/fr.po | 2 +-
tools/power/cpupower/po/it.po | 2 +-
tools/power/cpupower/po/pt.po | 2 +-
tools/power/cpupower/utils/cpufreq-set.c | 2 +
tools/power/pm-graph/README | 552 +++++++++++++
tools/power/pm-graph/bootgraph.py | 8 +-
tools/power/pm-graph/config/example.cfg | 26 +
tools/power/pm-graph/sleepgraph.8 | 16 +-
tools/power/pm-graph/sleepgraph.py | 857 ++++++++++++++++-----
55 files changed, 2325 insertions(+), 631 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] Power management updates for v5.3-rc1
2019-07-08 21:36 [GIT PULL] Power management updates for v5.3-rc1 Rafael J. Wysocki
@ 2019-07-09 18:05 ` pr-tracker-bot
0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2019-07-09 18:05 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linus Torvalds, Linux PM, ACPI Devel Maling List, Linux PCI,
Linux Kernel Mailing List
The pull request you sent on Mon, 8 Jul 2019 23:36:26 +0200:
> git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git pm-5.3-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/cf2d213e49fdf47e4c10dc629a3659e0026a54b8
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-07-09 18:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-08 21:36 [GIT PULL] Power management updates for v5.3-rc1 Rafael J. Wysocki
2019-07-09 18:05 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).