Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/3] PCI / ACPI: Handle sibling devices sharing power resources
@ 2019-06-18 16:18 Mika Westerberg
  2019-06-18 16:18 ` [PATCH v2 1/3] PCI / ACPI: Use cached ACPI device state to get PCI device power state Mika Westerberg
                   ` (3 more replies)
  0 siblings, 4 replies; 22+ messages in thread
From: Mika Westerberg @ 2019-06-18 16:18 UTC (permalink / raw)
  To: Rafael J. Wysocki, Bjorn Helgaas
  Cc: Len Brown, Lukas Wunner, Keith Busch, Alex Williamson,
	Alexandru Gagniuc, Mika Westerberg, linux-acpi, linux-pci

Hi all,

Based on a discussion regarding patch series I sent previously [1] to deal
with sibling devices sharing ACPI power resources, I prepared a new
reworked version according to the comments I got.

To summarize, in Intel Ice Lake the Thunderbolt controller, PCIe root ports
and xHCI all share power resources. When they are all in D3hot power
resources (returned by _PR3) can be turned off powering off the whole
block. However, there are two issues around this.

Firstly the PCI core sets the device power state by asking what the real
ACPI power state is. This results that all but last device sharing the
power resources are in D3hot when the power resources are turned off. This
causes issues if user runs for example 'lspci' because the device is really
in D3cold so what user gets back is all ones (0xffffffff).

Secondly if any of the device is runtime resumed the power resources are
turned on bringing all other devices sharing the resources to
D0uninitialized losing their wakeup configuration.

This series aims to fix the two issues by:

  1. Using the ACPI cached power state when PCI devices are transitioned
     into low power states instead of reading back the "real" power state.

  2. Introducing concept of "_PR0 dependent devices" that get runtime
     resumed whenever their power resource (which they might share with
     other sibling devices) gets turned on.

The series is based on the idea of Rafael J. Wysocki <rafael@kernel.org>.

[1] https://www.spinics.net/lists/linux-pci/msg83583.html

Mika Westerberg (3):
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Add _PR0 dependent devices

 drivers/acpi/power.c    | 139 ++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci-acpi.c  |   5 +-
 include/acpi/acpi_bus.h |   4 ++
 3 files changed, 147 insertions(+), 1 deletion(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, back to index

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-18 16:18 [PATCH v2 0/3] PCI / ACPI: Handle sibling devices sharing power resources Mika Westerberg
2019-06-18 16:18 ` [PATCH v2 1/3] PCI / ACPI: Use cached ACPI device state to get PCI device power state Mika Westerberg
2019-06-19 21:28   ` Bjorn Helgaas
2019-06-20  8:27     ` Mika Westerberg
2019-06-20 13:16       ` Bjorn Helgaas
2019-06-20 13:37         ` Mika Westerberg
2019-06-20 14:15           ` Bjorn Helgaas
2019-06-21 10:32             ` Rafael J. Wysocki
2019-06-21 13:09               ` Bjorn Helgaas
2019-06-22  8:51                 ` Rafael J. Wysocki
2019-06-24 10:57                   ` Mika Westerberg
2019-06-24 11:14               ` Rafael J. Wysocki
2019-06-25  9:45                 ` Mika Westerberg
2019-06-25 10:00                   ` Rafael J. Wysocki
2019-06-25 10:08                     ` Mika Westerberg
2019-06-21 11:56   ` Rafael J. Wysocki
2019-06-24 10:58     ` Mika Westerberg
2019-06-18 16:18 ` [PATCH v2 2/3] ACPI / PM: Introduce concept of a _PR0 dependent device Mika Westerberg
2019-06-19 13:20   ` Rafael J. Wysocki
2019-06-19 13:34     ` Mika Westerberg
2019-06-18 16:18 ` [PATCH v2 3/3] PCI / ACPI: Add _PR0 dependent devices Mika Westerberg
2019-06-19 13:24 ` [PATCH v2 0/3] PCI / ACPI: Handle sibling devices sharing power resources Rafael J. Wysocki

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git