Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
	Michael Jamet <michael.jamet@intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>, Lukas Wunner <lukas@wunner.de>,
	Mario.Limonciello@dell.com,
	Anthony Wong <anthony.wong@canonical.com>,
	Rajmohan Mani <rajmohan.mani@intel.com>,
	Raanan Avargil <raanan.avargil@intel.com>,
	David Laight <David.Laight@ACULAB.COM>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-acpi@vger.kernel.org
Subject: [PATCH v3 4/8] thunderbolt: Do not fail adding switch if some port is not implemented
Date: Mon, 19 Aug 2019 14:22:19 +0300
Message-ID: <20190819112223.15359-5-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20190819112223.15359-1-mika.westerberg@linux.intel.com>

There are two ways to mark a port as unimplemented. Typical way is to
return port type as TB_TYPE_INACTIVE when its config space is read.
Alternatively if the port is not physically present (such as ports 10
and 11 in ICL) reading from port config space returns
TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails
out from adding the switch if it receives any error during port
inititialization which is wrong.

Handle this properly and just leave the port as TB_TYPE_INACTIVE before
continuing to the next port.

This also allows us to get rid of special casing for Light Ridge port 5
in eeprom.c.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
---
 drivers/thunderbolt/ctl.c    | 23 +++++++++++++++++++----
 drivers/thunderbolt/eeprom.c |  4 ----
 drivers/thunderbolt/switch.c |  8 +++++++-
 3 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c
index 2427d73be731..2ec1af8f7968 100644
--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -930,6 +930,23 @@ struct tb_cfg_result tb_cfg_write_raw(struct tb_ctl *ctl, const void *buffer,
 	return res;
 }
 
+static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space,
+			    const struct tb_cfg_result *res)
+{
+	/*
+	 * For unimplemented ports access to port config space may return
+	 * TB_CFG_ERROR_INVALID_CONFIG_SPACE (alternatively their type is
+	 * set to TB_TYPE_INACTIVE). In the former case return -ENODEV so
+	 * that the caller can mark the port as disabled.
+	 */
+	if (space == TB_CFG_PORT &&
+	    res->tb_error == TB_CFG_ERROR_INVALID_CONFIG_SPACE)
+		return -ENODEV;
+
+	tb_cfg_print_error(ctl, res);
+	return -EIO;
+}
+
 int tb_cfg_read(struct tb_ctl *ctl, void *buffer, u64 route, u32 port,
 		enum tb_cfg_space space, u32 offset, u32 length)
 {
@@ -942,8 +959,7 @@ int tb_cfg_read(struct tb_ctl *ctl, void *buffer, u64 route, u32 port,
 
 	case 1:
 		/* Thunderbolt error, tb_error holds the actual number */
-		tb_cfg_print_error(ctl, &res);
-		return -EIO;
+		return tb_cfg_get_error(ctl, space, &res);
 
 	case -ETIMEDOUT:
 		tb_ctl_warn(ctl, "timeout reading config space %u from %#x\n",
@@ -969,8 +985,7 @@ int tb_cfg_write(struct tb_ctl *ctl, const void *buffer, u64 route, u32 port,
 
 	case 1:
 		/* Thunderbolt error, tb_error holds the actual number */
-		tb_cfg_print_error(ctl, &res);
-		return -EIO;
+		return tb_cfg_get_error(ctl, space, &res);
 
 	case -ETIMEDOUT:
 		tb_ctl_warn(ctl, "timeout writing config space %u to %#x\n",
diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c
index 81e8ac4c5805..3b2fb4aafd92 100644
--- a/drivers/thunderbolt/eeprom.c
+++ b/drivers/thunderbolt/eeprom.c
@@ -525,10 +525,6 @@ int tb_drom_read(struct tb_switch *sw)
 		sw->ports[3].dual_link_port = &sw->ports[4];
 		sw->ports[4].dual_link_port = &sw->ports[3];
 
-		/* Port 5 is inaccessible on this gen 1 controller */
-		if (sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE)
-			sw->ports[5].disabled = true;
-
 		return 0;
 	}
 
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 5668a44e0653..64f845fe4690 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -611,8 +611,14 @@ static int tb_init_port(struct tb_port *port)
 	int cap;
 
 	res = tb_port_read(port, &port->config, TB_CFG_PORT, 0, 8);
-	if (res)
+	if (res) {
+		if (res == -ENODEV) {
+			tb_dbg(port->sw->tb, " Port %d: not implemented\n",
+			       port->port);
+			return 0;
+		}
 		return res;
+	}
 
 	/* Port 0 is the switch itself and has no PHY. */
 	if (port->config.type == TB_TYPE_PORT && port->port != 0) {
-- 
2.23.0.rc1


  parent reply index

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19 11:22 [PATCH v3 0/8] thunderbolt: Intel Ice Lake support Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 1/8] thunderbolt: Correct path indices for PCIe tunnel Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 2/8] thunderbolt: Move NVM upgrade support flag to struct icm Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 3/8] thunderbolt: Use 32-bit writes when writing ring producer/consumer Mika Westerberg
2019-08-19 11:22 ` Mika Westerberg [this message]
2019-08-19 11:22 ` [PATCH v3 5/8] thunderbolt: Hide switch attributes that are not set Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 6/8] thunderbolt: Expose active parts of NVM even if upgrade is not supported Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 7/8] thunderbolt: Add support for Intel Ice Lake Mika Westerberg
2019-08-19 11:22 ` [PATCH v3 8/8] ACPI / property: Add two new Thunderbolt property GUIDs to the list Mika Westerberg
2019-08-19 16:29 ` [PATCH v3 0/8] thunderbolt: Intel Ice Lake support Mario.Limonciello
2019-08-19 17:57   ` Mika Westerberg
2019-08-19 18:22     ` Mario.Limonciello
2019-08-19 19:36       ` Mario.Limonciello
2019-08-20 10:01         ` Mika Westerberg
2019-08-20 11:34   ` Lukas Wunner
2019-08-20 17:00     ` Mario.Limonciello
2019-08-26  9:20 ` Mika Westerberg

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190819112223.15359-5-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=David.Laight@ACULAB.COM \
    --cc=Mario.Limonciello@dell.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=anthony.wong@canonical.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    --cc=raanan.avargil@intel.com \
    --cc=rajmohan.mani@intel.com \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org linux-acpi@archiver.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/ public-inbox