From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Erik Schmauss <erik.schmauss@intel.com>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>, linux-acpi@vger.kernel.org
Subject: Re: [PATCH v2 00/12] ACPICA version 20191018v2
Date: Sat, 26 Oct 2019 17:42:53 +0300 [thread overview]
Message-ID: <20191026144253.GI32742@smile.fi.intel.com> (raw)
In-Reply-To: <20191025213700.14685-1-erik.schmauss@intel.com>
On Fri, Oct 25, 2019 at 02:36:48PM -0700, Erik Schmauss wrote:
> V2 - fixed build warnings
>
> This patchset contains the linuxized patches for ACPICA version
> 20191018. There are several debugger changes but they are meant for
> acpiexec at this time. acpi_load_table definition has been modified and
> a new acpi_unload_table has been added. These new interfaces can be used
> as a part of config fs to load and unload tables.
>
> Other than that, Bob has run clang on our code base and removed several
> compiler warnings.
>
> This patchset is also available here:
> https://github.com/SchmErik/linux/tree/v20191018
Thanks!
I'll be able to test this next week.
>
> Bob Moore (5):
> ACPICA: Results from Clang changes/fixes From Clang V5.0.1. Mostly
> "set but never read" warnings.
> ACPICA: Win OSL: Replace get_tick_count with get_tick_count64
> ACPICA: More Clang changes - V8.0.1 Fixed all "dead assignment"
> warnings.
> ACPICA: Add new external interface, acpi_unload_table
> ACPICA: Update version to 20191018
>
> Erik Schmauss (6):
> ACPICA: utilities: add flag to only display data when dumping buffers
> ACPICA: debugger: add command to dump all fields of a particular
> subtype
> ACPICA: debugger: surround field unit output with braces '{'
> ACPICA: debugger: add field unit support for acpi_db_get_next_token
> ACPICA: acpiexec: initialize all simple types and field units from
> user input
> ACPICA: debugger: remove leading whitespaces when converting a string
> to a buffer
>
> Nikolaus Voss (1):
> ACPICA: make acpi_load_table() return table index
>
> drivers/acpi/acpi_configfs.c | 2 +-
> drivers/acpi/acpica/acdebug.h | 2 +
> drivers/acpi/acpica/acstruct.h | 10 +++
> drivers/acpi/acpica/acutils.h | 9 +--
> drivers/acpi/acpica/dbconvert.c | 4 ++
> drivers/acpi/acpica/dbdisply.c | 2 -
> drivers/acpi/acpica/dbfileio.c | 2 +-
> drivers/acpi/acpica/dbinput.c | 36 +++++++++-
> drivers/acpi/acpica/dbmethod.c | 4 ++
> drivers/acpi/acpica/dbnames.c | 114 ++++++++++++++++++++++++++++++++
> drivers/acpi/acpica/dbobject.c | 1 -
> drivers/acpi/acpica/dscontrol.c | 2 +-
> drivers/acpi/acpica/dsfield.c | 12 +---
> drivers/acpi/acpica/evgpeblk.c | 11 +--
> drivers/acpi/acpica/evgpeinit.c | 3 -
> drivers/acpi/acpica/evmisc.c | 12 +++-
> drivers/acpi/acpica/evregion.c | 4 +-
> drivers/acpi/acpica/evrgnini.c | 1 -
> drivers/acpi/acpica/hwxfsleep.c | 3 +
> drivers/acpi/acpica/nsconvert.c | 2 +-
> drivers/acpi/acpica/nsdump.c | 6 +-
> drivers/acpi/acpica/nsxfname.c | 4 +-
> drivers/acpi/acpica/psobject.c | 7 +-
> drivers/acpi/acpica/rscreate.c | 3 +
> drivers/acpi/acpica/tbdata.c | 3 +
> drivers/acpi/acpica/tbxfload.c | 40 ++++++++++-
> drivers/acpi/acpica/utbuffer.c | 52 ++++++++-------
> drivers/acpi/acpica/utids.c | 2 -
> drivers/acpi/acpica/uttrack.c | 2 +-
> drivers/firmware/efi/efi.c | 2 +-
> include/acpi/acpixf.h | 8 ++-
> 31 files changed, 291 insertions(+), 74 deletions(-)
>
> --
> 2.21.0
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2019-10-26 14:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-25 21:36 [PATCH v2 00/12] ACPICA version 20191018v2 Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 01/12] ACPICA: Results from Clang changes/fixes From Clang V5.0.1. Mostly "set but never read" warnings Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 02/12] ACPICA: Win OSL: Replace get_tick_count with get_tick_count64 Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 03/12] ACPICA: More Clang changes - V8.0.1 Fixed all "dead assignment" warnings Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 04/12] ACPICA: Add new external interface, acpi_unload_table Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 05/12] ACPICA: make acpi_load_table() return table index Erik Schmauss
2019-10-26 14:44 ` Andy Shevchenko
2019-10-28 17:15 ` Schmauss, Erik
2019-10-28 15:52 ` Andy Shevchenko
2019-10-25 21:36 ` [PATCH v2 06/12] ACPICA: utilities: add flag to only display data when dumping buffers Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 07/12] ACPICA: debugger: add command to dump all fields of a particular subtype Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 08/12] ACPICA: debugger: surround field unit output with braces '{' Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 09/12] ACPICA: debugger: add field unit support for acpi_db_get_next_token Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 10/12] ACPICA: acpiexec: initialize all simple types and field units from user input Erik Schmauss
2019-10-25 21:36 ` [PATCH v2 11/12] ACPICA: debugger: remove leading whitespaces when converting a string to a buffer Erik Schmauss
2019-10-25 21:37 ` [PATCH v2 12/12] ACPICA: Update version to 20191018 Erik Schmauss
2019-10-26 14:42 ` Andy Shevchenko [this message]
2019-10-28 15:58 ` [PATCH v2 00/12] ACPICA version 20191018v2 Andy Shevchenko
2019-10-28 17:49 ` Schmauss, Erik
2019-10-28 21:16 ` Rafael J. Wysocki
2019-10-29 9:56 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191026144253.GI32742@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=erik.schmauss@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).