Re: [PATCH v2 3/3] ACPI / watchdog: Set default timeout in probe

[Jean Delvare <jdelvare@suse.de>]

On Wed, 12 Feb 2020 17:59:41 +0300, Mika Westerberg wrote:
> If the BIOS default timeout for the watchdog is too small userspace may
> not have enough time to configure new timeout after opening the device
> before the system is already reset. For this reason program default
> timeout of 30 seconds in the driver probe and allow userspace to change
> this from command line or through module parameter (wdat_wdt.timeout).
> 
> Reported-by: Jean Delvare <jdelvare@suse.de>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> ---
>  drivers/watchdog/wdat_wdt.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c
> index e1b1fcfc02af..3065dd670a18 100644
> --- a/drivers/watchdog/wdat_wdt.c
> +++ b/drivers/watchdog/wdat_wdt.c
> @@ -54,6 +54,13 @@ module_param(nowayout, bool, 0);
>  MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>  		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>  
> +#define WDAT_DEFAULT_TIMEOUT	30
> +
> +static int timeout = WDAT_DEFAULT_TIMEOUT;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
> +		 __MODULE_STRING(WDAT_DEFAULT_TIMEOUT) ")");
> +
>  static int wdat_wdt_read(struct wdat_wdt *wdat,
>  	 const struct wdat_instruction *instr, u32 *value)
>  {
> @@ -438,6 +445,22 @@ static int wdat_wdt_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, wdat);
>  
> +	/*
> +	 * Set initial timeout so that userspace has time to configure the
> +	 * watchdog properly after it has opened the device. In some cases
> +	 * the BIOS default is too short and causes immediate reboot.
> +	 */
> +	if (timeout * 1000 < wdat->wdd.min_hw_heartbeat_ms ||
> +	    timeout * 1000 > wdat->wdd.max_hw_heartbeat_ms) {
> +		dev_warn(dev, "Invalid timeout %d given, using %d\n",
> +			 timeout, WDAT_DEFAULT_TIMEOUT);
> +		timeout = WDAT_DEFAULT_TIMEOUT;
> +	}
> +
> +	ret = wdat_wdt_set_timeout(&wdat->wdd, timeout);
> +	if (ret)
> +		return ret;
> +
>  	watchdog_set_nowayout(&wdat->wdd, nowayout);
>  	return devm_watchdog_register_device(dev, &wdat->wdd);
>  }

Reviewed-by: Jean Delvare <jdelvare@suse.de>

Thanks Mika!

-- 
Jean Delvare
SUSE L3 Support