Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/2] ACPI: APEI: Add support to notify the vendor specific HW errors
@ 2020-03-25 13:55 Shiju Jose
  2020-03-25 15:22 ` Bjorn Helgaas
  0 siblings, 1 reply; 4+ messages in thread
From: Shiju Jose @ 2020-03-25 13:55 UTC (permalink / raw)
  To: linux-acpi, linux-pci, linux-kernel, rjw, helgaas, lenb, bp,
	james.morse, tony.luck, gregkh, zhangliguang, tglx
  Cc: linuxarm, jonathan.cameron, tanxiaofei, yangyicong

Presently the vendor drivers are unable to do the recovery for the
vendor specific recoverable HW errors, reported to the APEI driver
in the vendor defined sections, because APEI driver does not support
reporting the same to the vendor drivers.

This patch set
1. add an interface to the APEI driver to enable the vendor
drivers to register the event handling functions for the corresponding
vendor specific HW errors and report the error to the vendor driver.

2. add driver to handle HiSilicon hip08 PCIe controller's errors
    which is an example application of the above APEI interface.

Changes:

V5:
1. Fix comments from James Morse.
1.1 Changed the notification method to use the atomic_notifier_chain.
1.2 Add the error handled status for the user space.

V4:
1. Fix for the smatch warning in the PCIe error driver:
    warn: should '((((1))) << (9 + i))' be a 64 bit type?
    if (err->val_bits & BIT(HISI_PCIE_LOCAL_VALID_ERR_MISC + i))
	^^^ This should be BIT_ULL() because it goes up to 9 + 32.

V3:
1. Fix the comments from Bjorn Helgaas.

V2:
1. Changes in the HiSilicon PCIe controller's error handling driver
    for the comments from Bjorn Helgaas.

2. Changes in the APEI interface to support reporting the vendor error
    for module with multiple devices, but use the same section type.
    In the error handler will use socket id/sub module id etc to distinguish
    the device.

V1:
1. Fix comments from James Morse.

2. add driver to handle HiSilicon hip08 PCIe controller's errors,
    which is an application of the above interface.

Shiju Jose (1):
   APEI: Add support to notify the vendor specific HW errors

Yicong Yang (1):
   PCI: HIP: Add handling of HiSilicon HIP PCIe controller errors

  drivers/acpi/apei/ghes.c                 |  35 ++-
  drivers/pci/controller/Kconfig           |   8 +
  drivers/pci/controller/Makefile          |   1 +
  drivers/pci/controller/pcie-hisi-error.c | 357 +++++++++++++++++++++++
  drivers/ras/ras.c                        |   5 +-
  include/acpi/ghes.h                      |  28 ++
  include/linux/ras.h                      |   6 +-
  include/ras/ras_event.h                  |   7 +-
  8 files changed, 440 insertions(+), 7 deletions(-)
  create mode 100644 drivers/pci/controller/pcie-hisi-error.c

-- 
2.17.1

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-25 13:55 [PATCH v5 0/2] ACPI: APEI: Add support to notify the vendor specific HW errors Shiju Jose
2020-03-25 15:22 ` Bjorn Helgaas
2020-03-25 16:27   ` Shiju Jose
2020-03-25 18:31     ` Bjorn Helgaas

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git