[net-next PATCH v4 0/6] ACPI support for dpaa2 MAC driver.

From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: Jeremy Linton <jeremy.linton@arm.com>,
	Russell King - ARM Linux admin <linux@armlinux.org.uk>,
	Jon <jon@solid-run.com>,
	Cristi Sovaiala <cristian.sovaiala@nxp.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Madalin Bucur <madalin.bucur@oss.nxp.com>
Cc: linux-acpi@vger.kernel.org, linux.cj@gmail.com,
	netdev@vger.kernel.org,
	Calvin Johnson <calvin.johnson@oss.nxp.com>
Subject: [net-next PATCH v4 0/6]  ACPI support for dpaa2 MAC driver.
Date: Thu,  9 Jul 2020 23:27:16 +0530	[thread overview]
Message-ID: <20200709175722.5228-1-calvin.johnson@oss.nxp.com> (raw)

 This patch series provides ACPI support for dpaa2 MAC driver.
 This also introduces ACPI mechanism to get PHYs registered on a
 MDIO bus and provide them to be connected to MAC.

 This patchset is dependent on the review patches available on:
https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/log/?h=for-review/acpi-iort-id-rework

 Device Tree can be tested with the below change which is also available in
the above referenced review patches:

--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev)
        if (error < 0)
                goto error_cleanup_mc_io;

+       mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
        mc->root_mc_bus_dev = mc_bus_dev;
        return 0;


Changes in v4:
- release fwnode_mdio after use
- return ERR_PTR instead of NULL
- introduce device_mdiobus_register()

Changes in v3:
- cleanup based on v2 comments
- Added description for more properties
- Added MDIO node DSDT entry
- introduce fwnode_mdio_find_bus()
- renamed and improved phy_find_by_fwnode()
- cleanup based on v2 comments
- move code into phylink_fwnode_phy_connect()

Changes in v2:
- clean up dpaa2_mac_get_node()
- introduce find_phy_device()
- use acpi_find_child_device()

Calvin Johnson (6):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: introduce device_mdiobus_register()
  net/fsl: use device_mdiobus_register()
  net: phy: introduce phy_find_by_fwnode()
  phylink: introduce phylink_fwnode_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 70 ++++++++-------
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  3 +-
 drivers/net/phy/mdio_bus.c                    | 47 ++++++++++
 drivers/net/phy/phy_device.c                  | 22 +++++
 drivers/net/phy/phylink.c                     | 33 +++++++
 include/linux/mdio.h                          |  1 +
 include/linux/phy.h                           |  2 +
 include/linux/phylink.h                       |  3 +
 9 files changed, 239 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

-- 
2.17.1

