linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains
@ 2020-07-13 15:55 Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 1/6] ACPI: Support Generic Initiator only domains Jonathan Cameron
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

Depends on
[PATCH] ACPI: Only create numa nodes from entries in SRAT or SRAT emulation.
or remove the extra parameter in acpi_map_pxm_to_node.

Introduces a new type of NUMA node for cases where we want to represent
the access characteristics of a non CPU initiator of memory requests,
as these differ from all those for existing nodes containing CPUs and/or
memory.

These Generic Initiators are presented by the node access0 class in
sysfs in the same way as a CPU.   It seems likely that there will be
usecases in which the best 'CPU' is desired and Generic Initiators
should be ignored.  The final few patches in this series introduced
access1 which is a new performance class in the sysfs node description
which presents only CPU to memory relationships.  Test cases for this
are described below.

Thanks to Dan for suggestions on V5.  Most of the changes are
an attempt to implement what was discussed in that thread.

The new patch makes it clear that some of the existing naming is perhaps
more specific than it should be. It may be worth a follow up patch
to rename from *cpu* to *initiator* in a few places where this might
cause confusion.

One outstanding question to highlight in this series is whether
we should assume all ACPI supporting architectures support Generic
Initiator domains, or whether to introduce an
ARCH_HAS_GENERIC_INITIATOR_DOMAINS entry in Kconfig.

Note that GI nodes suffer from the same issue around hugetlb_cma
as memoryless nodes.  A CMA area is defined that falls back into
a nearby node with memory, but can then not actually be used.
Proposed fix under review in.
https://patchwork.kernel.org/patch/11629939/

Changes since V6:

* Rebase on 5.8-rc4 + Dependency as above.
* Drop the ARM64 specific code. No specific calls are needed on ARM64
  as the generic node init is done for all nodes, whether or not they
  have memory.  X86 does memoryless nodes separately from those with
  memory and hence needs to specifically intialize GI only nodes.
* Fix up an error in the docs reported by Brice Goglin who also did
  quite a bit of testing of v5. Thanks!
  
Changes since V5:

3 new patches:
* A fix for a subtlety in how ACPI 6.3 changed part of the HMAT table.
* Introduction of access1 class to represent characteristics between CPU
  and memory, ingnoring GIs unlike access0 which includes them.
* Docs to describe the new access0 class.

Note that I ran a number of test cases for the new class which are
described at the end of this email.

Changes since V4:

At Rafael's suggestion:

Rebase on top of Dan William's Specific Purpose Memory series as that
moves srat.c Original patches cherry-picked fine onto mmotm with Dan's
patches applied.

Applies to mmotm-2019-09-25 +
https://lore.kernel.org/linux-acpi/156140036490.2951909.1837804994781523185.stgit@dwillia2-desk3.amr.corp.intel.com/
[PATCH v4 00/10] EFI Specific Purpose Memory Support
(note there are some trivial conflicts to deal with when applying
the SPM series).

Change since V3.
* Rebase.

Changes since RFC V2.
* RFC dropped as now we have x86 support, so the lack of guards in in the
  ACPI code etc should now be fine.
  * Added x86 support.  Note this has only been tested on QEMU as I don't have
    a convenient x86 NUMA machine to play with.  Note that this fitted together
      rather differently from arm64 so I'm particularly interested in feedback
        on the two solutions.

Since RFC V1.
* Fix incorrect interpretation of the ACPI entry noted by Keith Busch
* Use the acpica headers definitions that are now in mmotm.

It's worth noting that, to safely put a given device in a GI node, may
require changes to the existing drivers as it's not unusual to assume
you have local memory or processor core. There may be further constraints
not yet covered by this patch.

Original cover letter...

ACPI 6.3 introduced a new entity that can be part of a NUMA proximity domain.
It may share such a domain with the existing options (memory, CPU etc) but it
may also exist on it's own.

The intent is to allow the description of the NUMA properties (particularly
via HMAT) of accelerators and other initiators of memory activity that are not
the host processor running the operating system.

This patch set introduces 'just enough' to make them work for arm64 and x86.
It should be trivial to support other architectures, I just don't suitable
NUMA systems readily available to test.

There are a few quirks that need to be considered.

1. Fall back nodes
******************

As pre ACPI 6.3 supporting operating systems do not have Generic Initiator
Proximity Domains it is possible to specify, via _PXM in DSDT that another
device is part of such a GI only node.  This currently blows up spectacularly.

Whilst we can obviously 'now' protect against such a situation (see the related
thread on PCI _PXM support and the  threadripper board identified there as
also falling into the  problem of using non existent nodes
https://patchwork.kernel.org/patch/10723311/ ), there is no way to  be sure
we will never have legacy OSes that are not protected  against this.  It would
also be 'non ideal' to fallback to  a default node as there may be a better
(non GI) node to pick  if GI nodes aren't available.

The work around is that we also have a new system wide OSC bit that allows
an operating system to 'announce' that it supports Generic Initiators.  This
allows, the firmware to us DSDT magic to 'move' devices between the nodes
dependent on whether our new nodes are there or not.

2. New ways of assigning a proximity domain for devices
*******************************************************

Until now, the only way firmware could indicate that a particular device
(outside the 'special' set of cpus etc) was to be found in a particular
Proximity Domain by the use of _PXM in DSDT.

That is equally valid with GI domains, but we have new options. The SRAT
affinity structure includes a handle (ACPI or PCI) to identify devices
with the system and specify their proximity domain that way.  If both _PXM
and this are provided, they should give the same answer.

For now this patch set completely ignores that feature as we don't need
it to start the discussion.  It will form a follow up set at some point
(if no one else fancies doing it).

Test cases for the access1 class
********************************

Test cases for Generic Initiator additions to HMAT.

Setup

PXM0 (node 0) - CPU0 CPU1, 2G memory
PXM1 (node 1) - CPU2 CPU3, 2G memory
PXM2 (node 2) - CPU4 CPU5, 2G memory
PXM3 (node 4) - 2G memory (GI in one case below)
PXM4 (node 3) - GI only.

Config 1:  GI in PXM4 nearer to memory in PXM 3 than CPUs, not direct attached

[    2.384064] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:4 Target Domains:4 Base:256
[    2.384913] acpi/hmat:   Initiator-Target[0-0]:1 nsec
[    2.385190] acpi/hmat:   Initiator-Target[0-1]:9 nsec
[    2.385736] acpi/hmat:   Initiator-Target[0-2]:9 nsec
[    2.385984] acpi/hmat:   Initiator-Target[0-3]:9 nsec
[    2.386447] acpi/hmat:   Initiator-Target[1-0]:9 nsec
[    2.386740] acpi/hmat:   Initiator-Target[1-1]:1 nsec
[    2.386964] acpi/hmat:   Initiator-Target[1-2]:9 nsec
[    2.387174] acpi/hmat:   Initiator-Target[1-3]:9 nsec
[    2.387624] acpi/hmat:   Initiator-Target[2-0]:9 nsec
[    2.387953] acpi/hmat:   Initiator-Target[2-1]:9 nsec
[    2.388155] acpi/hmat:   Initiator-Target[2-2]:1 nsec
[    2.388607] acpi/hmat:   Initiator-Target[2-3]:9 nsec
[    2.388861] acpi/hmat:   Initiator-Target[4-0]:13 nsec
[    2.389126] acpi/hmat:   Initiator-Target[4-1]:13 nsec
[    2.389574] acpi/hmat:   Initiator-Target[4-2]:13 nsec
[    2.389805] acpi/hmat:   Initiator-Target[4-3]:5 nsec

# Sysfs reads the same for nodes 0-2 for access0 and access1 as no GI involved.

/sys/bus/node/devices/...
    node0 #1 and 2 similar.
        access0
            initiators
                node0
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node0
            uevent
        access1
            initiators
                node0
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node 0
            uevent
        compact
        cpu0
        cpu1
        ...
    node3 # Note PXM 4, contains GI only
        access0
            initiators
                *empty*
            power
            targets
                node4
            uevent
        compact
        ...
    node4
        access0
            initiators
                node3
                read_bandwidth  0
                read_latency    5
                write_bandwidth 0
                write_latency   5
            power
            targets
                *empty*
            uevent
        access1
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty*
            uevent
        compact
        ...

Config 2:  GI in PXM4 further to memory in PXM 3 than CPUs, not direct attached

[    4.073493] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:4 Target Domains:4 Base:256
[    4.074785] acpi/hmat:   Initiator-Target[0-0]:1 nsec
[    4.075150] acpi/hmat:   Initiator-Target[0-1]:9 nsec
[    4.075423] acpi/hmat:   Initiator-Target[0-2]:9 nsec
[    4.076184] acpi/hmat:   Initiator-Target[0-3]:9 nsec
[    4.077116] acpi/hmat:   Initiator-Target[1-0]:9 nsec
[    4.077366] acpi/hmat:   Initiator-Target[1-1]:1 nsec
[    4.077640] acpi/hmat:   Initiator-Target[1-2]:9 nsec
[    4.078156] acpi/hmat:   Initiator-Target[1-3]:9 nsec
[    4.078471] acpi/hmat:   Initiator-Target[2-0]:9 nsec
[    4.078994] acpi/hmat:   Initiator-Target[2-1]:9 nsec
[    4.079277] acpi/hmat:   Initiator-Target[2-2]:1 nsec
[    4.079505] acpi/hmat:   Initiator-Target[2-3]:9 nsec
[    4.080126] acpi/hmat:   Initiator-Target[4-0]:13 nsec
[    4.080995] acpi/hmat:   Initiator-Target[4-1]:13 nsec
[    4.081351] acpi/hmat:   Initiator-Target[4-2]:13 nsec
[    4.082125] acpi/hmat:   Initiator-Target[4-3]:13 nsec

/sys/bus/node/devices/...
    node0 #1 and 2 similar.
        access0
            initiators
                node0
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node0
                node4
            uevent
        access1
            initiators
                node0
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node0
                node4
            uevent
        compact
        cpu0
        cpu1
        ...
    node3 # Note PXM 4, contains GI only
        #No accessX directories.
        compact
        ...
    node4
        access0
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty*
            uevent
        access1
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty*
            uevent
        compact
        ...


case 3 - as per case 2 but now the memory in node 3 is direct attached to the
GI but nearer the main nodes (not physically sensible :))

/sys/bus/node/devices/...
    node0 #1 and 2 similar.
        access0
            initiators
                node0
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node0
                node4
            uevent
        access1
            initiators
                node0
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node0
                node4
            uevent
        compact
        cpu0
        cpu1
        ...
    node3 # Note PXM 4, contains GI only
        access0
            initiators
                *empty*
            power
            targets
                node4
            uevent
        compact
        ...
    node4
        access0
            initiators
                node3
                read_bandwidth  0
                read_latency    13
                write_bandwidth 0
                write_latency   13
            power
            targets
                *empty*
            uevent
        access1
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty*
            uevent
        compact
        ...

Case 4 - nearer the GI, but direct attached to one of the CPUS.
# Another bonkers one.

/sys/bus/node/devices/...
    node0 #1 similar.
        access0
            initiators
                node0
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node0
                node4
            uevent
        access1
            initiators
                node0
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node0
            uevent
        compact
        cpu0
        cpu1
        ...
    node2 # Direct attached to memory in node 3
        access0
            initiators
                node2
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node2
                node4 #direct attached
            uevent
        access1
            initiators
                node2
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node2
                node4 #direct attached
            uevent
        compact
        cpu0
        cpu1
        ...

    node3 # Note PXM 4, contains GI only
        #No accessX directories.
        compact
        ...
    node4
        access0
            initiators
                node3
                read_bandwidth  0
                read_latency    13
                write_bandwidth 0
                write_latency   13
            power
            targets
                *empty*
            uevent
        access1
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty*
            uevent
        compact
        ...

case 5 memory and GI together in node 3 (added an extra GI to node 3)
Note hmat should also reflect this extra initiator domain.

/sys/bus/node/devices/...
    node0 #1 and 2 similar.
        access0
            initiators
                node0
                read_bandwidth  0 #not specificed in hmat
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node0
                node4
            uevent
        access1
            initiators
                node0
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                read_bandwidth  1   
            power
            targets
                node0
            uevent
        compact
        cpu0
        cpu1
        ...
    node3 # Note PXM 3, contains GI only
        #No accessX directories.
        compact
        ...
    node4 # Now memory and GI.
        access0
            initiators
                node4
                read_bandwidth  0
                read_latency    1
                write_bandwidth 0
                write_latency   1
            power
            targets
                node4
            uevent
        access1
            initiators
                node0
                node1
                node2
                read_bandwidth  0
                read_latency    9
                write_bandwidth 0
                write_latency   9
            power
            targets
                *empty* # as expected GI doesn't paticipate in access 1.
            uevent
        compact
        ...

Jonathan Cameron (6):
  ACPI: Support Generic Initiator only domains
  x86: Support Generic Initiator only proximity domains
  ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
  node: Add access1 class to represent CPU to memory characteristics
  docs: mm: numaperf.rst Add brief description for access class 1.

 Documentation/admin-guide/mm/numaperf.rst |  8 ++
 arch/x86/include/asm/numa.h               |  2 +
 arch/x86/kernel/setup.c                   |  1 +
 arch/x86/mm/numa.c                        | 14 ++++
 drivers/acpi/bus.c                        |  1 +
 drivers/acpi/numa/hmat.c                  | 89 ++++++++++++++++++-----
 drivers/acpi/numa/srat.c                  | 60 ++++++++++++++-
 drivers/base/node.c                       |  3 +
 include/linux/acpi.h                      |  1 +
 include/linux/nodemask.h                  |  1 +
 10 files changed, 159 insertions(+), 21 deletions(-)

-- 
2.19.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v7 1/6] ACPI: Support Generic Initiator only domains
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
@ 2020-07-13 15:55 ` Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 2/6] x86: Support Generic Initiator only proximity domains Jonathan Cameron
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

Generic Initiators are a new ACPI concept that allows for the
description of proximity domains that contain a device which
performs memory access (such as a network card) but neither
host CPU nor Memory.

This patch has the parsing code and provides the infrastructure
for an architecture to associate these new domains with their
nearest memory processing node.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/numa/srat.c | 60 +++++++++++++++++++++++++++++++++++++++-
 drivers/base/node.c      |  3 ++
 include/linux/nodemask.h |  1 +
 3 files changed, 63 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index ed7d31795f4d..b71941437326 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -130,6 +130,36 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
 		}
 		break;
 
+	case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
+	{
+		struct acpi_srat_generic_affinity *p =
+			(struct acpi_srat_generic_affinity *)header;
+
+		if (p->device_handle_type == 0) {
+			/*
+			 * For pci devices this may be the only place they
+			 * are assigned a proximity domain
+			 */
+			pr_debug("SRAT Generic Initiator(Seg:%u BDF:%u) in proximity domain %d %s\n",
+				 *(u16 *)(&p->device_handle[0]),
+				 *(u16 *)(&p->device_handle[2]),
+				 p->proximity_domain,
+				 (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
+				"enabled" : "disabled");
+		} else {
+			/*
+			 * In this case we can rely on the device having a
+			 * proximity domain reference
+			 */
+			pr_debug("SRAT Generic Initiator(HID=%.8s UID=%.4s) in proximity domain %d %s\n",
+				(char *)(&p->device_handle[0]),
+				(char *)(&p->device_handle[8]),
+				p->proximity_domain,
+				(p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
+				"enabled" : "disabled");
+		}
+	}
+	break;
 	default:
 		pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",
 			header->type);
@@ -338,6 +368,32 @@ acpi_parse_gicc_affinity(union acpi_subtable_headers *header,
 	return 0;
 }
 
+static int __init
+acpi_parse_gi_affinity(union acpi_subtable_headers *header,
+		       const unsigned long end)
+{
+	struct acpi_srat_generic_affinity *gi_affinity;
+	int node;
+
+	gi_affinity = (struct acpi_srat_generic_affinity *)header;
+	if (!gi_affinity)
+		return -EINVAL;
+	acpi_table_print_srat_entry(&header->common);
+
+	if (!(gi_affinity->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED))
+		return -EINVAL;
+
+	node = acpi_map_pxm_to_node(gi_affinity->proximity_domain, true);
+	if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
+		pr_err("SRAT: Too many proximity domains.\n");
+		return -EINVAL;
+	}
+	node_set(node, numa_nodes_parsed);
+	node_set_state(node, N_GENERIC_INITIATOR);
+
+	return 0;
+}
+
 static int __initdata parsed_numa_memblks;
 
 static int __init
@@ -393,7 +449,7 @@ int __init acpi_numa_init(void)
 
 	/* SRAT: System Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
-		struct acpi_subtable_proc srat_proc[3];
+		struct acpi_subtable_proc srat_proc[4];
 
 		memset(srat_proc, 0, sizeof(srat_proc));
 		srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY;
@@ -402,6 +458,8 @@ int __init acpi_numa_init(void)
 		srat_proc[1].handler = acpi_parse_x2apic_affinity;
 		srat_proc[2].id = ACPI_SRAT_TYPE_GICC_AFFINITY;
 		srat_proc[2].handler = acpi_parse_gicc_affinity;
+		srat_proc[3].id = ACPI_SRAT_TYPE_GENERIC_AFFINITY;
+		srat_proc[3].handler = acpi_parse_gi_affinity;
 
 		acpi_table_parse_entries_array(ACPI_SIG_SRAT,
 					sizeof(struct acpi_table_srat),
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 5b02f69769e8..1a7bd5860f3c 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -980,6 +980,8 @@ static struct node_attr node_state_attr[] = {
 #endif
 	[N_MEMORY] = _NODE_ATTR(has_memory, N_MEMORY),
 	[N_CPU] = _NODE_ATTR(has_cpu, N_CPU),
+	[N_GENERIC_INITIATOR] = _NODE_ATTR(has_generic_initiator,
+					   N_GENERIC_INITIATOR),
 };
 
 static struct attribute *node_state_attrs[] = {
@@ -991,6 +993,7 @@ static struct attribute *node_state_attrs[] = {
 #endif
 	&node_state_attr[N_MEMORY].attr.attr,
 	&node_state_attr[N_CPU].attr.attr,
+	&node_state_attr[N_GENERIC_INITIATOR].attr.attr,
 	NULL
 };
 
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 27e7fa36f707..3334ce056335 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -399,6 +399,7 @@ enum node_states {
 #endif
 	N_MEMORY,		/* The node has memory(regular, high, movable) */
 	N_CPU,		/* The node has one or more cpus */
+	N_GENERIC_INITIATOR,	/* The node has one or more Generic Initiators */
 	NR_NODE_STATES
 };
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v7 2/6] x86: Support Generic Initiator only proximity domains
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 1/6] ACPI: Support Generic Initiator only domains Jonathan Cameron
@ 2020-07-13 15:55 ` Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 3/6] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

In common with memoryless domains we only register GI domains
if the proximity node is not online. If a domain is already
a memory containing domain, or a memoryless domain there is
nothing to do just because it also contains a Generic Initiator.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h |  2 ++
 arch/x86/kernel/setup.c     |  1 +
 arch/x86/mm/numa.c          | 14 ++++++++++++++
 3 files changed, 17 insertions(+)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index bbfde3d2662f..f631467272a3 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -62,12 +62,14 @@ extern void numa_clear_node(int cpu);
 extern void __init init_cpu_to_node(void);
 extern void numa_add_cpu(int cpu);
 extern void numa_remove_cpu(int cpu);
+extern void init_gi_nodes(void);
 #else	/* CONFIG_NUMA */
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
 static inline void init_cpu_to_node(void)		{ }
 static inline void numa_add_cpu(int cpu)		{ }
 static inline void numa_remove_cpu(int cpu)		{ }
+static inline void init_gi_nodes(void)			{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a3767e74c758..88b2330ef883 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1219,6 +1219,7 @@ void __init setup_arch(char **cmdline_p)
 	prefill_possible_map();
 
 	init_cpu_to_node();
+	init_gi_nodes();
 
 	io_apic_init_mappings();
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 8ee952038c80..7dba4648323d 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -747,6 +747,20 @@ static void __init init_memory_less_node(int nid)
 	 */
 }
 
+/*
+ * Generic Initiator Nodes may have neither CPU nor Memory.
+ * At this stage if either of the others were present we would
+ * already be online.
+ */
+void __init init_gi_nodes(void)
+{
+	int nid;
+
+	for_each_node_state(nid, N_GENERIC_INITIATOR)
+		if (!node_online(nid))
+			init_memory_less_node(nid);
+}
+
 /*
  * Setup early cpu_to_node.
  *
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v7 3/6] ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 1/6] ACPI: Support Generic Initiator only domains Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 2/6] x86: Support Generic Initiator only proximity domains Jonathan Cameron
@ 2020-07-13 15:55 ` Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 4/6] ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 Jonathan Cameron
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

Until we tell ACPI that we support generic initiators, it will have
to operate in fall back domain mode and all _PXM entries should
be on existing non GI domains.

This patch sets the relevant OSC bit to make that happen.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/bus.c   | 1 +
 include/linux/acpi.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 54002670cb7a..0ac96fb67515 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -302,6 +302,7 @@ static void acpi_bus_osc_support(void)
 
 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT;
 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT;
+	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT;
 
 #ifdef CONFIG_X86
 	if (boot_cpu_has(X86_FEATURE_HWP)) {
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 1414b7e0a486..40ec5f2544ed 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -546,6 +546,7 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
 #define OSC_SB_PCLPI_SUPPORT			0x00000080
 #define OSC_SB_OSLPI_SUPPORT			0x00000100
 #define OSC_SB_CPC_DIVERSE_HIGH_SUPPORT		0x00001000
+#define OSC_SB_GENERIC_INITIATOR_SUPPORT	0x00002000
 
 extern bool osc_sb_apei_support_acked;
 extern bool osc_pc_lpi_support_confirmed;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v7 4/6] ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
                   ` (2 preceding siblings ...)
  2020-07-13 15:55 ` [PATCH v7 3/6] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron
@ 2020-07-13 15:55 ` Jonathan Cameron
  2020-07-13 15:55 ` [PATCH v7 5/6] node: Add access1 class to represent CPU to memory characteristics Jonathan Cameron
  2020-07-13 15:56 ` [PATCH v7 6/6] docs: mm: numaperf.rst Add brief description for access class 1 Jonathan Cameron
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

In ACPI 6.3, the Memory Proximity Domain Attributes Structure
changed substantially.  One of those changes was that the flag
for "Memory Proximity Domain field is valid" was deprecated.

This was because the field "Proximity Domain for the Memory"
became a required field and hence having a validity flag makes
no sense.

So the correct logic is to always assume the field is there.
Current code assumes it never is.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/numa/hmat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c
index 3c0414816772..7ad2d5882a7d 100644
--- a/drivers/acpi/numa/hmat.c
+++ b/drivers/acpi/numa/hmat.c
@@ -424,7 +424,7 @@ static int __init hmat_parse_proximity_domain(union acpi_subtable_headers *heade
 		pr_info("HMAT: Memory Flags:%04x Processor Domain:%u Memory Domain:%u\n",
 			p->flags, p->processor_PD, p->memory_PD);
 
-	if (p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) {
+	if ((p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) || hmat_revision == 2) {
 		target = find_mem_target(p->memory_PD);
 		if (!target) {
 			pr_debug("HMAT: Memory Domain missing from SRAT\n");
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v7 5/6] node: Add access1 class to represent CPU to memory characteristics
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
                   ` (3 preceding siblings ...)
  2020-07-13 15:55 ` [PATCH v7 4/6] ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 Jonathan Cameron
@ 2020-07-13 15:55 ` Jonathan Cameron
  2020-07-13 15:56 ` [PATCH v7 6/6] docs: mm: numaperf.rst Add brief description for access class 1 Jonathan Cameron
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:55 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

New access1 class is nearly the same as access0, but always provides
characteristics for CPUs to memory.   The existing access0 class
provides characteristics to nearest or direct connnect initiator
which may be a Generic Initiator such as a GPU or network adapter.

This new class allows thread placement on CPUs to be performed
so as to give optimal access characteristics to memory, even if that
memory is for example attached to a GPU or similar and only accessible
to the CPU via an appropriate bus.

Suggested-by: Dan Willaims <dan.j.williams@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/numa/hmat.c | 87 +++++++++++++++++++++++++++++++---------
 1 file changed, 68 insertions(+), 19 deletions(-)

diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c
index 7ad2d5882a7d..a9016c7be896 100644
--- a/drivers/acpi/numa/hmat.c
+++ b/drivers/acpi/numa/hmat.c
@@ -56,7 +56,7 @@ struct memory_target {
 	unsigned int memory_pxm;
 	unsigned int processor_pxm;
 	struct resource memregions;
-	struct node_hmem_attrs hmem_attrs;
+	struct node_hmem_attrs hmem_attrs[2];
 	struct list_head caches;
 	struct node_cache_attrs cache_attrs;
 	bool registered;
@@ -65,6 +65,7 @@ struct memory_target {
 struct memory_initiator {
 	struct list_head node;
 	unsigned int processor_pxm;
+	bool has_cpu;
 };
 
 struct memory_locality {
@@ -108,6 +109,7 @@ static __init void alloc_memory_initiator(unsigned int cpu_pxm)
 		return;
 
 	initiator->processor_pxm = cpu_pxm;
+	initiator->has_cpu = node_state(pxm_to_node(cpu_pxm), N_CPU);
 	list_add_tail(&initiator->node, &initiators);
 }
 
@@ -215,28 +217,28 @@ static u32 hmat_normalize(u16 entry, u64 base, u8 type)
 }
 
 static void hmat_update_target_access(struct memory_target *target,
-					     u8 type, u32 value)
+				      u8 type, u32 value, int access)
 {
 	switch (type) {
 	case ACPI_HMAT_ACCESS_LATENCY:
-		target->hmem_attrs.read_latency = value;
-		target->hmem_attrs.write_latency = value;
+		target->hmem_attrs[access].read_latency = value;
+		target->hmem_attrs[access].write_latency = value;
 		break;
 	case ACPI_HMAT_READ_LATENCY:
-		target->hmem_attrs.read_latency = value;
+		target->hmem_attrs[access].read_latency = value;
 		break;
 	case ACPI_HMAT_WRITE_LATENCY:
-		target->hmem_attrs.write_latency = value;
+		target->hmem_attrs[access].write_latency = value;
 		break;
 	case ACPI_HMAT_ACCESS_BANDWIDTH:
-		target->hmem_attrs.read_bandwidth = value;
-		target->hmem_attrs.write_bandwidth = value;
+		target->hmem_attrs[access].read_bandwidth = value;
+		target->hmem_attrs[access].write_bandwidth = value;
 		break;
 	case ACPI_HMAT_READ_BANDWIDTH:
-		target->hmem_attrs.read_bandwidth = value;
+		target->hmem_attrs[access].read_bandwidth = value;
 		break;
 	case ACPI_HMAT_WRITE_BANDWIDTH:
-		target->hmem_attrs.write_bandwidth = value;
+		target->hmem_attrs[access].write_bandwidth = value;
 		break;
 	default:
 		break;
@@ -329,8 +331,12 @@ static __init int hmat_parse_locality(union acpi_subtable_headers *header,
 
 			if (mem_hier == ACPI_HMAT_MEMORY) {
 				target = find_mem_target(targs[targ]);
-				if (target && target->processor_pxm == inits[init])
-					hmat_update_target_access(target, type, value);
+				if (target && target->processor_pxm == inits[init]) {
+					hmat_update_target_access(target, type, value, 0);
+					/* If the node has a CPU, update access 1*/
+					if (node_state(pxm_to_node(inits[init]), N_CPU))
+						hmat_update_target_access(target, type, value, 1);
+				}
 			}
 		}
 	}
@@ -566,6 +572,7 @@ static void hmat_register_target_initiators(struct memory_target *target)
 	unsigned int mem_nid, cpu_nid;
 	struct memory_locality *loc = NULL;
 	u32 best = 0;
+	bool access0done = false;
 	int i;
 
 	mem_nid = pxm_to_node(target->memory_pxm);
@@ -577,7 +584,11 @@ static void hmat_register_target_initiators(struct memory_target *target)
 	if (target->processor_pxm != PXM_INVAL) {
 		cpu_nid = pxm_to_node(target->processor_pxm);
 		register_memory_node_under_compute_node(mem_nid, cpu_nid, 0);
-		return;
+		access0done = true;
+		if (node_state(cpu_nid, N_CPU)) {
+			register_memory_node_under_compute_node(mem_nid, cpu_nid, 1);
+			return;
+		}
 	}
 
 	if (list_empty(&localities))
@@ -591,6 +602,40 @@ static void hmat_register_target_initiators(struct memory_target *target)
 	 */
 	bitmap_zero(p_nodes, MAX_NUMNODES);
 	list_sort(p_nodes, &initiators, initiator_cmp);
+	if (!access0done) {
+		for (i = WRITE_LATENCY; i <= READ_BANDWIDTH; i++) {
+			loc = localities_types[i];
+			if (!loc)
+				continue;
+
+			best = 0;
+			list_for_each_entry(initiator, &initiators, node) {
+				u32 value;
+
+				if (!test_bit(initiator->processor_pxm, p_nodes))
+					continue;
+
+				value = hmat_initiator_perf(target, initiator,
+							    loc->hmat_loc);
+				if (hmat_update_best(loc->hmat_loc->data_type, value, &best))
+					bitmap_clear(p_nodes, 0, initiator->processor_pxm);
+				if (value != best)
+					clear_bit(initiator->processor_pxm, p_nodes);
+			}
+			if (best)
+				hmat_update_target_access(target, loc->hmat_loc->data_type, best, 0);
+		}
+
+		for_each_set_bit(i, p_nodes, MAX_NUMNODES) {
+			cpu_nid = pxm_to_node(i);
+			register_memory_node_under_compute_node(mem_nid, cpu_nid, 0);
+		}
+	}
+
+	/* Access 1 ignores Generic Initiators */
+	bitmap_zero(p_nodes, MAX_NUMNODES);
+	list_sort(p_nodes, &initiators, initiator_cmp);
+	best = 0;
 	for (i = WRITE_LATENCY; i <= READ_BANDWIDTH; i++) {
 		loc = localities_types[i];
 		if (!loc)
@@ -600,6 +645,10 @@ static void hmat_register_target_initiators(struct memory_target *target)
 		list_for_each_entry(initiator, &initiators, node) {
 			u32 value;
 
+			if (!initiator->has_cpu) {
+				clear_bit(initiator->processor_pxm, p_nodes);
+				continue;
+			}
 			if (!test_bit(initiator->processor_pxm, p_nodes))
 				continue;
 
@@ -610,12 +659,11 @@ static void hmat_register_target_initiators(struct memory_target *target)
 				clear_bit(initiator->processor_pxm, p_nodes);
 		}
 		if (best)
-			hmat_update_target_access(target, loc->hmat_loc->data_type, best);
+			hmat_update_target_access(target, loc->hmat_loc->data_type, best, 1);
 	}
-
 	for_each_set_bit(i, p_nodes, MAX_NUMNODES) {
 		cpu_nid = pxm_to_node(i);
-		register_memory_node_under_compute_node(mem_nid, cpu_nid, 0);
+		register_memory_node_under_compute_node(mem_nid, cpu_nid, 1);
 	}
 }
 
@@ -628,10 +676,10 @@ static void hmat_register_target_cache(struct memory_target *target)
 		node_add_cache(mem_nid, &tcache->cache_attrs);
 }
 
-static void hmat_register_target_perf(struct memory_target *target)
+static void hmat_register_target_perf(struct memory_target *target, int access)
 {
 	unsigned mem_nid = pxm_to_node(target->memory_pxm);
-	node_set_perf_attrs(mem_nid, &target->hmem_attrs, 0);
+	node_set_perf_attrs(mem_nid, &target->hmem_attrs[access], access);
 }
 
 static void hmat_register_target_device(struct memory_target *target,
@@ -733,7 +781,8 @@ static void hmat_register_target(struct memory_target *target)
 	if (!target->registered) {
 		hmat_register_target_initiators(target);
 		hmat_register_target_cache(target);
-		hmat_register_target_perf(target);
+		hmat_register_target_perf(target, 0);
+		hmat_register_target_perf(target, 1);
 		target->registered = true;
 	}
 	mutex_unlock(&target_lock);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v7 6/6] docs: mm: numaperf.rst Add brief description for access class 1.
  2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
                   ` (4 preceding siblings ...)
  2020-07-13 15:55 ` [PATCH v7 5/6] node: Add access1 class to represent CPU to memory characteristics Jonathan Cameron
@ 2020-07-13 15:56 ` Jonathan Cameron
  5 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-07-13 15:56 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-arm-kernel, x86
  Cc: Lorenzo Pieralisi, Bjorn Helgaas, rafael, linux-kernel,
	Ingo Molnar, Thomas Gleixner, linuxarm, Dan Williams,
	Brice Goglin, Jonathan Cameron

Try to make minimal changes to the document which already describes
access class 0 in a generic fashion (including IO initiatiors that
are not CPUs).

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 Documentation/admin-guide/mm/numaperf.rst | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst
index a80c3c37226e..a9b1a30f75af 100644
--- a/Documentation/admin-guide/mm/numaperf.rst
+++ b/Documentation/admin-guide/mm/numaperf.rst
@@ -56,6 +56,11 @@ nodes' access characteristics share the same performance relative to other
 linked initiator nodes. Each target within an initiator's access class,
 though, do not necessarily perform the same as each other.
 
+The access class "1" is used to allow differentiation between initiators
+that are CPUs and hence suitable for generic task scheduling, and
+IO initiators such as GPUs and CPUs.  Unlike access class 0, only
+nodes containing CPUs are considered.
+
 ================
 NUMA Performance
 ================
@@ -88,6 +93,9 @@ The latency attributes are provided in nanoseconds.
 The values reported here correspond to the rated latency and bandwidth
 for the platform.
 
+Access class 1, takes the same form, but only includes values for CPU to
+memory activity.
+
 ==========
 NUMA Cache
 ==========
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-07-13 16:00 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-13 15:55 [PATCH v7 0/6] ACPI: Support Generic Initiator proximity domains Jonathan Cameron
2020-07-13 15:55 ` [PATCH v7 1/6] ACPI: Support Generic Initiator only domains Jonathan Cameron
2020-07-13 15:55 ` [PATCH v7 2/6] x86: Support Generic Initiator only proximity domains Jonathan Cameron
2020-07-13 15:55 ` [PATCH v7 3/6] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron
2020-07-13 15:55 ` [PATCH v7 4/6] ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 Jonathan Cameron
2020-07-13 15:55 ` [PATCH v7 5/6] node: Add access1 class to represent CPU to memory characteristics Jonathan Cameron
2020-07-13 15:56 ` [PATCH v7 6/6] docs: mm: numaperf.rst Add brief description for access class 1 Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).