From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: Jeremy Linton <jeremy.linton@arm.com>,
Russell King - ARM Linux admin <linux@armlinux.org.uk>,
Jon <jon@solid-run.com>,
Cristi Sovaiala <cristian.sovaiala@nxp.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Andrew Lunn <andrew@lunn.ch>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Madalin Bucur <madalin.bucur@oss.nxp.com>
Cc: netdev@vger.kernel.org, linux.cj@gmail.com,
linux-acpi@vger.kernel.org,
Calvin Johnson <calvin.johnson@oss.nxp.com>
Subject: [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY
Date: Wed, 15 Jul 2020 14:33:55 +0530 [thread overview]
Message-ID: <20200715090400.4733-2-calvin.johnson@oss.nxp.com> (raw)
In-Reply-To: <20200715090400.4733-1-calvin.johnson@oss.nxp.com>
Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.
An ACPI node property "mdio-handle" is introduced to reference the
MDIO bus on which PHYs are registered with autoprobing method used
by mdiobus_register().
Describe properties "phy-channel" and "phy-mode"
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- cleanup based on v2 comments
- Added description for more properties
- Added MDIO node DSDT entry
Changes in v2: None
Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..0132fee10b45
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an mdiobus are probed and registered using mdiobus_register().
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+mdiobus have to be referenced.
+
+mdio-handle
+-----------
+For each MAC node, a property "mdio-handle" is used to reference the
+MDIO bus on which the PHYs are registered. On getting hold of the MDIO
+bus, use find_phy_device() to get the PHY connected to the MAC.
+
+phy-channel
+-----------
+Property "phy-channel" defines the address of the PHY on the mdiobus.
+
+phy-mode
+--------
+Property "phy-mode" defines the type of PHY interface.
+
+An example of this is shown below::
+
+DSDT entry for MAC where MDIO node is referenced
+------------------------------------------------
+ Scope(\_SB.MCE0.PR17) // 1G
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () {"phy-channel", 1},
+ Package () {"phy-mode", "rgmii-id"},
+ Package () {"mdio-handle", Package (){\_SB.MDI0}}
+ }
+ })
+ }
+
+ Scope(\_SB.MCE0.PR18) // 1G
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () {"phy-channel", 2},
+ Package () {"phy-mode", "rgmii-id"},
+ Package () {"mdio-handle", Package (){\_SB.MDI0}}
+ }
+ })
+ }
+
+DSDT entry for MDIO node
+------------------------
+a) Silicon Component
+--------------------
+ Scope(_SB)
+ {
+ Device(MDI0) {
+ Name(_HID, "NXP0006")
+ Name(_CCA, 1)
+ Name(_UID, 0)
+ Name(_CRS, ResourceTemplate() {
+ Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+ {
+ MDI0_IT
+ }
+ }) // end of _CRS for MDI0
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () {"little-endian", 1},
+ }
+ })
+ } // end of MDI0
+ }
+
+b) Platform Component
+---------------------
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
--
2.17.1
next prev parent reply other threads:[~2020-07-15 9:04 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 9:03 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
2020-07-15 9:03 ` Calvin Johnson [this message]
2020-07-16 3:04 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Florian Fainelli
2020-07-16 3:11 ` Andrew Lunn
2020-07-23 23:26 ` Jeremy Linton
2020-07-24 13:39 ` Andrew Lunn
2020-07-24 17:26 ` Jeremy Linton
2020-07-24 17:39 ` Florian Fainelli
2020-07-24 19:20 ` Andrew Lunn
2020-07-24 20:12 ` Andy Shevchenko
2020-07-24 20:13 ` Florian Fainelli
2020-07-24 20:20 ` Andy Shevchenko
2020-07-25 7:36 ` Calvin Johnson
2020-07-25 10:48 ` Andy Shevchenko
2020-07-24 21:06 ` Russell King - ARM Linux admin
2020-07-27 17:03 ` Sudeep Holla
2020-07-24 19:14 ` Andrew Lunn
2020-07-27 17:21 ` Sudeep Holla
2020-07-28 20:34 ` Andrew Lunn
2020-07-28 20:59 ` Russell King - ARM Linux admin
2020-07-28 21:26 ` Andy Shevchenko
2020-07-29 16:00 ` Rafael J. Wysocki
2020-07-31 15:08 ` Andrew Lunn
2020-07-27 17:32 ` Jon Nettleton
[not found] ` <1595922651-sup-5323@galangal.danc.bne.opengear.com>
2020-07-28 20:45 ` Andrew Lunn
2020-07-28 20:56 ` Florian Fainelli
2020-07-28 21:28 ` Andy Shevchenko
2020-07-28 21:40 ` Florian Fainelli
2020-07-31 15:14 ` Andrew Lunn
2020-09-25 13:22 ` Grant Likely
2020-07-28 22:30 ` Jeremy Linton
2020-07-29 0:39 ` Florian Fainelli
2020-07-29 2:53 ` Jeremy Linton
2020-07-29 3:16 ` Florian Fainelli
2020-07-29 8:43 ` Jon Nettleton
2020-07-29 9:39 ` Calvin Johnson
2020-09-25 13:34 ` Grant Likely
2020-09-26 4:30 ` Calvin Johnson
2020-09-29 5:17 ` Calvin Johnson
2020-09-29 13:43 ` Andrew Lunn
2020-09-29 13:55 ` Andy Shevchenko
2020-09-29 14:32 ` Andrew Lunn
2020-09-29 14:46 ` Andy Shevchenko
2020-09-29 15:06 ` Andrew Lunn
2020-09-29 15:29 ` Arnd Bergmann
2020-09-29 14:44 ` Arnd Bergmann
2020-09-29 14:59 ` Andrew Lunn
2020-09-29 15:59 ` Grant Likely
2020-09-29 15:53 ` Grant Likely
2020-09-29 16:04 ` Calvin Johnson
2020-07-15 9:03 ` [net-next PATCH v7 2/6] net: phy: introduce device_mdiobus_register() Calvin Johnson
2020-07-16 3:05 ` Florian Fainelli
2020-07-15 9:03 ` [net-next PATCH v7 3/6] net/fsl: use device_mdiobus_register() Calvin Johnson
2020-07-16 3:05 ` Florian Fainelli
2020-07-15 9:03 ` [net-next PATCH v7 4/6] net: phy: introduce phy_find_by_mdio_handle() Calvin Johnson
2020-07-16 3:06 ` Florian Fainelli
2020-07-15 9:03 ` [net-next PATCH v7 5/6] phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
2020-07-15 9:04 ` [net-next PATCH v7 6/6] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson
2020-09-25 13:39 ` [net-next PATCH v7 0/6] ACPI support for dpaa2 " Grant Likely
2020-09-26 4:34 ` Calvin Johnson
2020-07-25 14:23 Calvin Johnson
2020-07-25 14:23 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715090400.4733-2-calvin.johnson@oss.nxp.com \
--to=calvin.johnson@oss.nxp.com \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=cristian.sovaiala@nxp.com \
--cc=f.fainelli@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=jeremy.linton@arm.com \
--cc=jon@solid-run.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux.cj@gmail.com \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@oss.nxp.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).