Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Jani Nikula" <jani.nikula@linux.intel.com>,
	"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
	"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	"Len Brown" <lenb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-pwm@vger.kernel.org,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	dri-devel@lists.freedesktop.org,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-acpi@vger.kernel.org
Subject: [PATCH v5 11/16] pwm: crc: Implement apply() method to support the new atomic PWM API
Date: Fri, 17 Jul 2020 15:37:48 +0200
Message-ID: <20200717133753.127282-12-hdegoede@redhat.com> (raw)
In-Reply-To: <20200717133753.127282-1-hdegoede@redhat.com>

Replace the enable, disable and config pwm_ops with an apply op,
to support the new atomic PWM API.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v3:
- Keep crc_pwm_calc_clk_div() helper to avoid needless churn
---
 drivers/pwm/pwm-crc.c | 89 ++++++++++++++++++++++++++-----------------
 1 file changed, 53 insertions(+), 36 deletions(-)

diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index b72008c9b072..8a7f4707279c 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -51,59 +51,76 @@ static int crc_pwm_calc_clk_div(int period_ns)
 	return clk_div;
 }
 
-static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
+static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
 {
-	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
-	int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
-
-	regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div | PWM_OUTPUT_ENABLE);
-	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
-
-	return 0;
-}
-
-static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
-{
-	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
-	int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
-
-	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
-	regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div);
-}
-
-static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
-			  int duty_ns, int period_ns)
-{
-	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
 	struct device *dev = crc_pwm->chip.dev;
-	int level;
+	int err;
 
-	if (period_ns > PWM_MAX_PERIOD_NS) {
+	if (state->period > PWM_MAX_PERIOD_NS) {
 		dev_err(dev, "un-supported period_ns\n");
 		return -EINVAL;
 	}
 
-	if (pwm_get_period(pwm) != period_ns) {
-		int clk_div = crc_pwm_calc_clk_div(period_ns);
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EOPNOTSUPP;
+
+	if (pwm_is_enabled(pwm) && !state->enabled) {
+		err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
+		if (err) {
+			dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+			return err;
+		}
+	}
+
+	if (pwm_get_duty_cycle(pwm) != state->duty_cycle ||
+	    pwm_get_period(pwm) != state->period) {
+		int level = state->duty_cycle * PWM_MAX_LEVEL / state->period;
 
+		err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err);
+			return err;
+		}
+	}
+
+	if (pwm_is_enabled(pwm) && state->enabled &&
+	    pwm_get_period(pwm) != state->period) {
 		/* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */
-		regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+		err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+			return err;
+		}
+	}
 
-		regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
-					clk_div | PWM_OUTPUT_ENABLE);
+	if (pwm_get_period(pwm) != state->period ||
+	    pwm_is_enabled(pwm) != state->enabled) {
+		int clk_div = crc_pwm_calc_clk_div(state->period);
+		int pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0;
+
+		err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
+				   clk_div | pwm_output_enable);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+			return err;
+		}
 	}
 
-	/* change the pwm duty cycle */
-	level = duty_ns * PWM_MAX_LEVEL / period_ns;
-	regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+	if (!pwm_is_enabled(pwm) && state->enabled) {
+		err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+		if (err) {
+			dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+			return err;
+		}
+	}
 
 	return 0;
 }
 
 static const struct pwm_ops crc_pwm_ops = {
-	.config = crc_pwm_config,
-	.enable = crc_pwm_enable,
-	.disable = crc_pwm_disable,
+	.apply = crc_pwm_apply,
 };
 
 static int crystalcove_pwm_probe(struct platform_device *pdev)
-- 
2.26.2


  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:37 [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the " Hans de Goede
2020-07-17 13:37 ` [PATCH v5 01/16] ACPI / LPSS: Resume Cherry Trail PWM controller in no-irq phase Hans de Goede
2020-07-17 13:37 ` [PATCH v5 02/16] ACPI / LPSS: Save Cherry Trail PWM ctx registers only once (at activation) Hans de Goede
2020-07-17 13:37 ` [PATCH v5 03/16] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare() Hans de Goede
2020-07-17 13:37 ` [PATCH v5 04/16] pwm: lpss: Add range limit check for the base_unit register value Hans de Goede
2020-07-17 13:37 ` [PATCH v5 05/16] pwm: lpss: Add pwm_lpss_prepare_enable() helper Hans de Goede
2020-07-28 18:45   ` Andy Shevchenko
2020-07-28 19:49     ` Hans de Goede
2020-07-17 13:37 ` [PATCH v5 06/16] pwm: lpss: Use pwm_lpss_apply() when restoring state on resume Hans de Goede
2020-07-28 18:57   ` Andy Shevchenko
2020-07-28 19:55     ` Hans de Goede
2020-07-29  8:12       ` Andy Shevchenko
2020-08-02 20:51         ` Hans de Goede
2020-08-03  8:41           ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 07/16] pwm: crc: Fix period / duty_cycle times being off by a factor of 256 Hans de Goede
2020-07-28 19:36   ` Andy Shevchenko
2020-07-28 20:00     ` Hans de Goede
2020-07-29  8:13   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 08/16] pwm: crc: Fix off-by-one error in the clock-divider calculations Hans de Goede
2020-07-29 10:28   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 09/16] pwm: crc: Fix period changes not having any effect Hans de Goede
2020-07-29 10:30   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 10/16] pwm: crc: Enable/disable PWM output on enable/disable Hans de Goede
2020-07-29 10:32   ` Andy Shevchenko
2020-07-17 13:37 ` Hans de Goede [this message]
2020-07-29 10:51   ` [PATCH v5 11/16] pwm: crc: Implement apply() method to support the new atomic PWM API Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 12/16] pwm: crc: Implement get_state() method Hans de Goede
2020-07-17 13:37 ` [PATCH v5 13/16] drm/i915: panel: Add get_vbt_pwm_freq() helper Hans de Goede
2020-07-17 13:37 ` [PATCH v5 14/16] drm/i915: panel: Honor the VBT PWM frequency for devs with an external PWM controller Hans de Goede
2020-07-17 13:44 ` [PATCH v5 15/16] drm/i915: panel: Honor the VBT PWM min setting " Hans de Goede
2020-07-17 13:44   ` [PATCH v5 16/16] drm/i915: panel: Use atomic PWM API " Hans de Goede
2020-07-27  7:41 ` [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Thierry Reding
2020-07-29  8:23   ` Andy Shevchenko
2020-07-29  9:32     ` Hans de Goede
2020-07-30  9:26       ` Thierry Reding
2020-08-01 14:33         ` Hans de Goede
2020-07-29 10:54 ` Andy Shevchenko
2020-08-01 14:38   ` Hans de Goede
2020-08-02 11:25     ` Andy Shevchenko
2020-08-02 19:43       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717133753.127282-12-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=rodrigo.vivi@intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git