Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Jani Nikula" <jani.nikula@linux.intel.com>,
	"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
	"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	"Len Brown" <lenb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-pwm@vger.kernel.org,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	dri-devel@lists.freedesktop.org,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-acpi@vger.kernel.org
Subject: [PATCH v5 03/16] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()
Date: Fri, 17 Jul 2020 15:37:40 +0200
Message-ID: <20200717133753.127282-4-hdegoede@redhat.com> (raw)
In-Reply-To: <20200717133753.127282-1-hdegoede@redhat.com>

According to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency.

So assuming e.g. a 16 bit counter this means that if base_unit is set to 1,
after 65535 input clock-cycles the counter has been increased from 0 to
65535 and it will overflow on the next cycle, so it will overflow after
every 65536 clock cycles and thus the calculations done in
pwm_lpss_prepare() should use 65536 and not 65535.

This commit fixes this. Note this also aligns the calculations in
pwm_lpss_prepare() with those in pwm_lpss_get_state().

Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid
potential overflow of base_unit"). The next patch in this series really
fixes the potential overflow of the base_unit value.

Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v3:
- Add Fixes tag
- Add Reviewed-by: Andy Shevchenko tag
---
 drivers/pwm/pwm-lpss.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 9d965ffe66d1..43b1fc634af1 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -93,7 +93,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	 * The equation is:
 	 * base_unit = round(base_unit_range * freq / c)
 	 */
-	base_unit_range = BIT(lpwm->info->base_unit_bits) - 1;
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
 	freq *= base_unit_range;
 
 	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
@@ -104,8 +104,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 
 	orig_ctrl = ctrl = pwm_lpss_read(pwm);
 	ctrl &= ~PWM_ON_TIME_DIV_MASK;
-	ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT);
-	base_unit &= base_unit_range;
+	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+	base_unit &= (base_unit_range - 1);
 	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
 	ctrl |= on_time_div;
 
-- 
2.26.2


  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:37 [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Hans de Goede
2020-07-17 13:37 ` [PATCH v5 01/16] ACPI / LPSS: Resume Cherry Trail PWM controller in no-irq phase Hans de Goede
2020-07-17 13:37 ` [PATCH v5 02/16] ACPI / LPSS: Save Cherry Trail PWM ctx registers only once (at activation) Hans de Goede
2020-07-17 13:37 ` Hans de Goede [this message]
2020-07-17 13:37 ` [PATCH v5 04/16] pwm: lpss: Add range limit check for the base_unit register value Hans de Goede
2020-07-17 13:37 ` [PATCH v5 05/16] pwm: lpss: Add pwm_lpss_prepare_enable() helper Hans de Goede
2020-07-28 18:45   ` Andy Shevchenko
2020-07-28 19:49     ` Hans de Goede
2020-07-17 13:37 ` [PATCH v5 06/16] pwm: lpss: Use pwm_lpss_apply() when restoring state on resume Hans de Goede
2020-07-28 18:57   ` Andy Shevchenko
2020-07-28 19:55     ` Hans de Goede
2020-07-29  8:12       ` Andy Shevchenko
2020-08-02 20:51         ` Hans de Goede
2020-08-03  8:41           ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 07/16] pwm: crc: Fix period / duty_cycle times being off by a factor of 256 Hans de Goede
2020-07-28 19:36   ` Andy Shevchenko
2020-07-28 20:00     ` Hans de Goede
2020-07-29  8:13   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 08/16] pwm: crc: Fix off-by-one error in the clock-divider calculations Hans de Goede
2020-07-29 10:28   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 09/16] pwm: crc: Fix period changes not having any effect Hans de Goede
2020-07-29 10:30   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 10/16] pwm: crc: Enable/disable PWM output on enable/disable Hans de Goede
2020-07-29 10:32   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 11/16] pwm: crc: Implement apply() method to support the new atomic PWM API Hans de Goede
2020-07-29 10:51   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 12/16] pwm: crc: Implement get_state() method Hans de Goede
2020-07-17 13:37 ` [PATCH v5 13/16] drm/i915: panel: Add get_vbt_pwm_freq() helper Hans de Goede
2020-07-17 13:37 ` [PATCH v5 14/16] drm/i915: panel: Honor the VBT PWM frequency for devs with an external PWM controller Hans de Goede
2020-07-17 13:44 ` [PATCH v5 15/16] drm/i915: panel: Honor the VBT PWM min setting " Hans de Goede
2020-07-17 13:44   ` [PATCH v5 16/16] drm/i915: panel: Use atomic PWM API " Hans de Goede
2020-07-27  7:41 ` [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Thierry Reding
2020-07-29  8:23   ` Andy Shevchenko
2020-07-29  9:32     ` Hans de Goede
2020-07-30  9:26       ` Thierry Reding
2020-08-01 14:33         ` Hans de Goede
2020-07-29 10:54 ` Andy Shevchenko
2020-08-01 14:38   ` Hans de Goede
2020-08-02 11:25     ` Andy Shevchenko
2020-08-02 19:43       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717133753.127282-4-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=rodrigo.vivi@intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git