Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] ACPICA release 20200717
@ 2020-07-20 17:31 Erik Kaneda
  2020-07-20 17:31 ` [PATCH 1/3] ACPICA: Replace one-element array with flexible-array Erik Kaneda
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Erik Kaneda @ 2020-07-20 17:31 UTC (permalink / raw)
  To: Rafael J . Wysocki, linux-acpi; +Cc: Erik Kaneda

This series contains patches relevant to linux kernel from ACPICA's
20200717 release. This ACPICA release contains a change in the ACPI
object reference counting mechanism to allow firmware to declare a
large amount of OperationRegion field units without overflowing the
reference count.

Bob Moore (1):
  ACPICA: Update version to 20200717 Version 20200717.

Erik Kaneda (1):
  ACPICA: Do not increment operation_region reference counts for field
    units

Gustavo A. R. Silva (1):
  ACPICA: Replace one-element array with flexible-array

 drivers/acpi/acpica/exprep.c   | 4 ----
 drivers/acpi/acpica/utdelete.c | 6 +-----
 drivers/acpi/acpica/utids.c    | 3 +--
 include/acpi/acpixf.h          | 2 +-
 include/acpi/actypes.h         | 2 +-
 5 files changed, 4 insertions(+), 13 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-20 17:31 [PATCH 0/3] ACPICA release 20200717 Erik Kaneda
2020-07-20 17:31 ` [PATCH 1/3] ACPICA: Replace one-element array with flexible-array Erik Kaneda
2020-07-20 17:31 ` [PATCH 2/3] ACPICA: Do not increment operation_region reference counts for field units Erik Kaneda
2020-07-20 17:31 ` [PATCH 3/3] ACPICA: Update version to 20200717 Version 20200717 Erik Kaneda
2020-07-27 12:56 ` [PATCH 0/3] ACPICA release 20200717 Rafael J. Wysocki

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git