Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [net-next PATCH v7 0/6]  ACPI support for dpaa2 MAC driver.
@ 2020-07-25 14:23 Calvin Johnson
  2020-07-25 14:23 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
                   ` (6 more replies)
  0 siblings, 7 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:23 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

 This patch series provides ACPI support for dpaa2 MAC driver.
 This also introduces ACPI mechanism to get PHYs registered on a
 MDIO bus and provide them to be connected to MAC.

 Previous discussions on this patchset is available at:
 https://lore.kernel.org/linux-acpi/20200715090400.4733-1-calvin.johnson@oss.nxp.com/T/#t

 Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
 https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
 Remaining patches are independent of the above patch and can be applied without
 any issues.

 Device Tree can be tested on LX2160A-RDB with the below change which is also
available in the above referenced patches:

--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev)
        if (error < 0)
                goto error_cleanup_mc_io;

+       mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
        mc->root_mc_bus_dev = mc_bus_dev;
        return 0;


Changes in v7:
- remove unnecessary -ve check for u32 var
- assign flags to phy_dev

Changes in v6:
- change device_mdiobus_register() parameter position
- improve documentation
- change device_mdiobus_register() parameter position
- clean up phylink_fwnode_phy_connect()

Changes in v5:
- add description
- clean up if else
- rename phy_find_by_fwnode() to phy_find_by_mdio_handle()
- add docment for phy_find_by_mdio_handle()
- error out DT in phy_find_by_mdio_handle()
- clean up err return
- return -EINVAL for invalid fwnode

Changes in v4:
- release fwnode_mdio after use
- return ERR_PTR instead of NULL
- introduce device_mdiobus_register()

Changes in v3:
- cleanup based on v2 comments
- Added description for more properties
- Added MDIO node DSDT entry
- introduce fwnode_mdio_find_bus()
- renamed and improved phy_find_by_fwnode()
- cleanup based on v2 comments
- move code into phylink_fwnode_phy_connect()

Changes in v2:
- clean up dpaa2_mac_get_node()
- introduce find_phy_device()
- use acpi_find_child_device()

Calvin Johnson (6):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: introduce device_mdiobus_register()
  net/fsl: use device_mdiobus_register()
  net: phy: introduce phy_find_by_mdio_handle()
  phylink: introduce phylink_fwnode_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 70 ++++++++-------
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  3 +-
 drivers/net/phy/mdio_bus.c                    | 51 +++++++++++
 drivers/net/phy/phy_device.c                  | 40 +++++++++
 drivers/net/phy/phylink.c                     | 32 +++++++
 include/linux/mdio.h                          |  1 +
 include/linux/phy.h                           |  2 +
 include/linux/phylink.h                       |  3 +
 9 files changed, 260 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
@ 2020-07-25 14:23 ` Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 2/6] net: phy: introduce device_mdiobus_register() Calvin Johnson
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:23 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.

An ACPI node property "mdio-handle" is introduced to reference the
MDIO bus on which PHYs are registered with autoprobing method used
by mdiobus_register().

Describe properties "phy-channel" and "phy-mode"

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

---

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- cleanup based on v2 comments
- Added description for more properties
- Added MDIO node DSDT entry

Changes in v2: None

 Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..0132fee10b45
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an mdiobus are probed and registered using mdiobus_register().
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+mdiobus have to be referenced.
+
+mdio-handle
+-----------
+For each MAC node, a property "mdio-handle" is used to reference the
+MDIO bus on which the PHYs are registered. On getting hold of the MDIO
+bus, use find_phy_device() to get the PHY connected to the MAC.
+
+phy-channel
+-----------
+Property "phy-channel" defines the address of the PHY on the mdiobus.
+
+phy-mode
+--------
+Property "phy-mode" defines the type of PHY interface.
+
+An example of this is shown below::
+
+DSDT entry for MAC where MDIO node is referenced
+------------------------------------------------
+	Scope(\_SB.MCE0.PR17) // 1G
+	{
+	  Name (_DSD, Package () {
+	     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		 Package () {
+		     Package () {"phy-channel", 1},
+		     Package () {"phy-mode", "rgmii-id"},
+		     Package () {"mdio-handle", Package (){\_SB.MDI0}}
+	      }
+	   })
+	}
+
+	Scope(\_SB.MCE0.PR18) // 1G
+	{
+	  Name (_DSD, Package () {
+	    ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () {"phy-channel", 2},
+		    Package () {"phy-mode", "rgmii-id"},
+		    Package () {"mdio-handle", Package (){\_SB.MDI0}}
+	    }
+	  })
+	}
+
+DSDT entry for MDIO node
+------------------------
+a) Silicon Component
+--------------------
+	Scope(_SB)
+	{
+	  Device(MDI0) {
+	    Name(_HID, "NXP0006")
+	    Name(_CCA, 1)
+	    Name(_UID, 0)
+	    Name(_CRS, ResourceTemplate() {
+	      Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+	      Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+	       {
+		 MDI0_IT
+	       }
+	    }) // end of _CRS for MDI0
+	    Name (_DSD, Package () {
+	      ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+	      Package () {
+		 Package () {"little-endian", 1},
+	      }
+	    })
+	  } // end of MDI0
+	}
+
+b) Platform Component
+---------------------
+	Scope(\_SB.MDI0)
+	{
+	  Device(PHY1) {
+	    Name (_ADR, 0x1)
+	  } // end of PHY1
+
+	  Device(PHY2) {
+	    Name (_ADR, 0x2)
+	  } // end of PHY2
+	}
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 2/6] net: phy: introduce device_mdiobus_register()
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
  2020-07-25 14:23 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
@ 2020-07-25 14:24 ` Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 3/6] net/fsl: use device_mdiobus_register() Calvin Johnson
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:24 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

Introduce device_mdiobus_register() to register mdiobus
in cases of either DT or ACPI.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

---

Changes in v7: None
Changes in v6:
- change device_mdiobus_register() parameter position
- improve documentation

Changes in v5:
- add description
- clean up if else

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/phy/mdio_bus.c | 26 ++++++++++++++++++++++++++
 include/linux/mdio.h       |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 46b33701ad4b..8610f938f81f 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -501,6 +501,32 @@ static int mdiobus_create_device(struct mii_bus *bus,
 	return ret;
 }
 
+/**
+ * device_mdiobus_register - register mdiobus for either DT or ACPI
+ * @bus: target mii_bus
+ * @dev: given MDIO device
+ *
+ * Description: Given an MDIO device and target mii bus, this function
+ * calls of_mdiobus_register() for DT node and mdiobus_register() in
+ * case of ACPI.
+ *
+ * Returns 0 on success or negative error code on failure.
+ */
+int device_mdiobus_register(struct device *dev,
+			    struct mii_bus *bus)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+
+	if (is_of_node(fwnode))
+		return of_mdiobus_register(bus, to_of_node(fwnode));
+	if (fwnode) {
+		bus->dev.fwnode = fwnode;
+		return mdiobus_register(bus);
+	}
+	return -ENODEV;
+}
+EXPORT_SYMBOL(device_mdiobus_register);
+
 /**
  * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
  * @bus: target mii_bus
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 898cbf00332a..f454c5435101 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -358,6 +358,7 @@ static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
 	return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
 }
 
+int device_mdiobus_register(struct device *dev, struct mii_bus *bus);
 int mdiobus_register_device(struct mdio_device *mdiodev);
 int mdiobus_unregister_device(struct mdio_device *mdiodev);
 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 3/6] net/fsl: use device_mdiobus_register()
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
  2020-07-25 14:23 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 2/6] net: phy: introduce device_mdiobus_register() Calvin Johnson
@ 2020-07-25 14:24 ` Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 4/6] net: phy: introduce phy_find_by_mdio_handle() Calvin Johnson
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:24 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

Replace of_mdiobus_register() with device_mdiobus_register()
to take care of both DT and ACPI mdiobus_register.

Remove unused device_node pointer.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

---

Changes in v7: None
Changes in v6:
- change device_mdiobus_register() parameter position

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/ethernet/freescale/xgmac_mdio.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index 98be51d8b08c..704f2b166d0a 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -243,7 +243,6 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 
 static int xgmac_mdio_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct mii_bus *bus;
 	struct resource *res;
 	struct mdio_fsl_priv *priv;
@@ -285,7 +284,7 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 	priv->has_a011043 = device_property_read_bool(&pdev->dev,
 						      "fsl,erratum-a011043");
 
-	ret = of_mdiobus_register(bus, np);
+	ret = device_mdiobus_register(&pdev->dev, bus);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
 		goto err_registration;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 4/6] net: phy: introduce phy_find_by_mdio_handle()
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
                   ` (2 preceding siblings ...)
  2020-07-25 14:24 ` [net-next PATCH v7 3/6] net/fsl: use device_mdiobus_register() Calvin Johnson
@ 2020-07-25 14:24 ` Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 5/6] phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:24 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

The PHYs on an mdiobus are probed and registered using mdiobus_register().
Later, for connecting these PHYs to MAC, the PHYs registered on the
mdiobus have to be referenced.

For each MAC node, a property "mdio-handle" is used to reference the
MDIO bus on which the PHYs are registered. On getting hold of the MDIO
bus, use phy_find_by_fwnode() to get the PHY connected to the MAC.

Introduce fwnode_mdio_find_bus() to find the mii_bus that corresponds
to given mii_bus fwnode.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

---

Changes in v7:
- remove unnecessary -ve check for u32 var

Changes in v6: None
Changes in v5:
- rename phy_find_by_fwnode() to phy_find_by_mdio_handle()
- add docment for phy_find_by_mdio_handle()
- error out DT in phy_find_by_mdio_handle()
- clean up err return

Changes in v4:
- release fwnode_mdio after use
- return ERR_PTR instead of NULL

Changes in v3:
- introduce fwnode_mdio_find_bus()
- renamed and improved phy_find_by_fwnode()

Changes in v2: None

 drivers/net/phy/mdio_bus.c   | 25 ++++++++++++++++++++++
 drivers/net/phy/phy_device.c | 40 ++++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |  2 ++
 3 files changed, 67 insertions(+)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 8610f938f81f..d9597c5b55ae 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -435,6 +435,31 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
 }
 EXPORT_SYMBOL(of_mdio_find_bus);
 
+/**
+ * fwnode_mdio_find_bus - Given an mii_bus fwnode, find the mii_bus.
+ * @mdio_bus_fwnode: fwnode of the mii_bus.
+ *
+ * Returns a reference to the mii_bus, or NULL if none found.  The
+ * embedded struct device will have its reference count incremented,
+ * and this must be put once the bus is finished with.
+ *
+ * Because the association of a fwnode and mii_bus is made via
+ * mdiobus_register(), the mii_bus cannot be found before it is
+ * registered with mdiobus_register().
+ *
+ */
+struct mii_bus *fwnode_mdio_find_bus(struct fwnode_handle *mdio_bus_fwnode)
+{
+	struct device *d;
+
+	if (!mdio_bus_fwnode)
+		return NULL;
+
+	d = class_find_device_by_fwnode(&mdio_bus_class, mdio_bus_fwnode);
+	return d ? to_mii_bus(d) : NULL;
+}
+EXPORT_SYMBOL(fwnode_mdio_find_bus);
+
 /* Walk the list of subnodes of a mdio bus and look for a node that
  * matches the mdio device's address with its 'reg' property. If
  * found, set the of_node pointer for the mdio device. This allows
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1b9523595839..746755c086bf 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -23,8 +23,10 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
+#include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/sfp.h>
 #include <linux/skbuff.h>
@@ -965,6 +967,44 @@ struct phy_device *phy_find_first(struct mii_bus *bus)
 }
 EXPORT_SYMBOL(phy_find_first);
 
+/**
+ * phy_find_by_mdio_handle - get phy device from mdio-handle and phy-channel
+ * @fwnode: a pointer to a &struct fwnode_handle  to get mdio-handle and
+ * phy-channel
+ *
+ * Find fwnode_mdio using mdio-handle reference. Using fwnode_mdio get the
+ * mdio bus. Property phy-channel provides the phy address on the mdio bus.
+ * Pass mdio bus and phy address to mdiobus_get_phy() and get corresponding
+ * phy_device. This method is used for ACPI and not for DT.
+ *
+ * Returns pointer to the phy device on success, else ERR_PTR.
+ */
+struct phy_device *phy_find_by_mdio_handle(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *fwnode_mdio;
+	struct mii_bus *mdio;
+	int addr;
+	int err;
+
+	if (is_of_node(fwnode))
+		return ERR_PTR(-EINVAL);
+
+	fwnode_mdio = fwnode_find_reference(fwnode, "mdio-handle", 0);
+	mdio = fwnode_mdio_find_bus(fwnode_mdio);
+	fwnode_handle_put(fwnode_mdio);
+	if (!mdio)
+		return ERR_PTR(-ENODEV);
+
+	err = fwnode_property_read_u32(fwnode, "phy-channel", &addr);
+	if (err)
+		return ERR_PTR(err);
+	if (addr >= PHY_MAX_ADDR)
+		return ERR_PTR(-EINVAL);
+
+	return mdiobus_get_phy(mdio, addr);
+}
+EXPORT_SYMBOL(phy_find_by_mdio_handle);
+
 static void phy_link_change(struct phy_device *phydev, bool up)
 {
 	struct net_device *netdev = phydev->attached_dev;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0403eb799913..fd383a22eb61 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -334,6 +334,7 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
 }
 
 struct mii_bus *mdio_find_bus(const char *mdio_name);
+struct mii_bus *fwnode_mdio_find_bus(struct fwnode_handle *mdio_bus_fwnode);
 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
 
 #define PHY_INTERRUPT_DISABLED	false
@@ -1245,6 +1246,7 @@ int phy_sfp_probe(struct phy_device *phydev,
 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 			      phy_interface_t interface);
 struct phy_device *phy_find_first(struct mii_bus *bus);
+struct phy_device *phy_find_by_mdio_handle(struct fwnode_handle *fwnode);
 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		      u32 flags, phy_interface_t interface);
 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 5/6] phylink: introduce phylink_fwnode_phy_connect()
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
                   ` (3 preceding siblings ...)
  2020-07-25 14:24 ` [net-next PATCH v7 4/6] net: phy: introduce phy_find_by_mdio_handle() Calvin Johnson
@ 2020-07-25 14:24 ` Calvin Johnson
  2020-07-25 14:24 ` [net-next PATCH v7 6/6] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson
  2020-07-29  0:39 ` [net-next PATCH v7 0/6] ACPI support for dpaa2 " David Miller
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:24 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---

Changes in v7:
- assign flags to phy_dev

Changes in v6:
- clean up phylink_fwnode_phy_connect()

Changes in v5:
- return -EINVAL for invalid fwnode

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/phy/phylink.c | 32 ++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 35 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 32b4bd6a5b55..c35ae42d9318 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
@@ -1118,6 +1119,37 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl. Actions specified in phylink_connect_phy() will be
+ * performed.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct phy_device *phy_dev;
+
+	if (is_of_node(fwnode))
+		return phylink_of_phy_connect(pl, to_of_node(fwnode), flags);
+	if (is_acpi_device_node(fwnode)) {
+		phy_dev = phy_find_by_mdio_handle(fwnode);
+		if (!phy_dev)
+			return -ENODEV;
+		phy_dev->dev_flags |= flags;
+		return phylink_connect_phy(pl, phy_dev);
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 1aad2aea4610..ba23b5a1548f 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -434,6 +434,9 @@ void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 6/6] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
                   ` (4 preceding siblings ...)
  2020-07-25 14:24 ` [net-next PATCH v7 5/6] phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
@ 2020-07-25 14:24 ` Calvin Johnson
  2020-07-29  0:39 ` [net-next PATCH v7 0/6] ACPI support for dpaa2 " David Miller
  6 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-07-25 14:24 UTC (permalink / raw)
  To: Rafael J . Wysocki, Len Brown, Lorenzo Pieralisi, Hanjun Guo,
	Sudeep Holla, Al Stone, Jeremy Linton,
	Russell King - ARM Linux admin, Jon, Cristi Sovaiala,
	Ioana Ciornei, Andrew Lunn, Andy Shevchenko, Florian Fainelli,
	Madalin Bucur
  Cc: linux-acpi, netdev, linux.cj, Paul Yang, Calvin Johnson

Modify dpaa2_mac_connect() to support ACPI along with DT.
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.
Replace of_get_phy_mode with fwnode_get_phy_mode to get
phy-mode for a dpmac_node.
Define and use helper function find_phy_device() to find phy_dev
that is later connected to mac->phylink.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

---

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- introduce device_mdiobus_register()

Changes in v3:
- cleanup based on v2 comments
- move code into phylink_fwnode_phy_connect()

Changes in v2:
- clean up dpaa2_mac_get_node()
- introduce find_phy_device()
- use acpi_find_child_device()

 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 70 +++++++++++--------
 1 file changed, 40 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 3ee236c5fc37..297d2dab9e97 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* Copyright 2019 NXP */
 
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+
 #include "dpaa2-eth.h"
 #include "dpaa2-mac.h"
 
@@ -23,38 +26,46 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 }
 
 /* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+						u16 dpmac_id)
 {
-	struct device_node *dpmacs, *dpmac = NULL;
-	u32 id;
+	struct fwnode_handle *fsl_mc_fwnode = dev_fwnode(dev->parent->parent);
+	struct fwnode_handle *dpmacs, *dpmac = NULL;
+	struct acpi_device *adev;
 	int err;
+	u32 id;
 
-	dpmacs = of_find_node_by_name(NULL, "dpmacs");
-	if (!dpmacs)
-		return NULL;
-
-	while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
-		err = of_property_read_u32(dpmac, "reg", &id);
-		if (err)
-			continue;
-		if (id == dpmac_id)
-			break;
+	if (is_of_node(fsl_mc_fwnode)) {
+		dpmacs = fwnode_get_named_child_node(fsl_mc_fwnode, "dpmacs");
+		if (!dpmacs)
+			return NULL;
+
+		while ((dpmac = fwnode_get_next_child_node(dpmacs, dpmac))) {
+			err = fwnode_property_read_u32(dpmac, "reg", &id);
+			if (err)
+				continue;
+			if (id == dpmac_id)
+				return dpmac;
+		}
+		fwnode_handle_put(dpmacs);
+	} else if (is_acpi_device_node(fsl_mc_fwnode)) {
+		adev = acpi_find_child_device(ACPI_COMPANION(dev->parent),
+					      dpmac_id, false);
+		if (adev)
+			return acpi_fwnode_handle(adev);
 	}
-
-	of_node_put(dpmacs);
-
-	return dpmac;
+	return NULL;
 }
 
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
 				 struct dpmac_attr attr)
 {
 	phy_interface_t if_mode;
 	int err;
 
-	err = of_get_phy_mode(node, &if_mode);
-	if (!err)
-		return if_mode;
+	err = fwnode_get_phy_mode(dpmac_node);
+	if (err > 0)
+		return err;
 
 	err = phy_mode(attr.eth_if, &if_mode);
 	if (!err)
@@ -231,7 +242,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct fsl_mc_device *dpmac_dev = mac->mc_dev;
 	struct net_device *net_dev = mac->net_dev;
-	struct device_node *dpmac_node;
+	struct fwnode_handle *dpmac_node = NULL;
 	struct phylink *phylink;
 	struct dpmac_attr attr;
 	int err;
@@ -251,7 +262,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 
 	mac->if_link_type = attr.link_type;
 
-	dpmac_node = dpaa2_mac_get_node(attr.id);
+	dpmac_node = dpaa2_mac_get_node(&dpmac_dev->dev, attr.id);
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", attr.id);
 		err = -ENODEV;
@@ -269,7 +280,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	 * error out if the interface mode requests them and there is no PHY
 	 * to act upon them
 	 */
-	if (of_phy_is_fixed_link(dpmac_node) &&
+	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
 	    (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -282,7 +293,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
 	phylink = phylink_create(&mac->phylink_config,
-				 of_fwnode_handle(dpmac_node), mac->if_mode,
+				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
@@ -290,20 +301,19 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	}
 	mac->phylink = phylink;
 
-	err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+	err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
 	if (err) {
-		netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+		netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
 		goto err_phylink_destroy;
 	}
 
-	of_node_put(dpmac_node);
-
+	fwnode_handle_put(dpmac_node);
 	return 0;
 
 err_phylink_destroy:
 	phylink_destroy(mac->phylink);
 err_put_node:
-	of_node_put(dpmac_node);
+	fwnode_handle_put(dpmac_node);
 err_close_dpmac:
 	dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
 	return err;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver.
  2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
                   ` (5 preceding siblings ...)
  2020-07-25 14:24 ` [net-next PATCH v7 6/6] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson
@ 2020-07-29  0:39 ` David Miller
  2020-07-29  0:42   ` Florian Fainelli
  6 siblings, 1 reply; 12+ messages in thread
From: David Miller @ 2020-07-29  0:39 UTC (permalink / raw)
  To: calvin.johnson
  Cc: rafael, lenb, Lorenzo.Pieralisi, guohanjun, sudeep.holla, ahs3,
	jeremy.linton, linux, jon, cristian.sovaiala, ioana.ciornei,
	andrew, andy.shevchenko, f.fainelli, madalin.bucur, linux-acpi,
	netdev, linux.cj, Paul.Yang

From: Calvin Johnson <calvin.johnson@oss.nxp.com>
Date: Sat, 25 Jul 2020 19:53:58 +0530

>  This patch series provides ACPI support for dpaa2 MAC driver.
>  This also introduces ACPI mechanism to get PHYs registered on a
>  MDIO bus and provide them to be connected to MAC.
> 
>  Previous discussions on this patchset is available at:
>  https://lore.kernel.org/linux-acpi/20200715090400.4733-1-calvin.johnson@oss.nxp.com/T/#t
> 
>  Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
>  https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
>  Remaining patches are independent of the above patch and can be applied without
>  any issues.

This really needs to be reviewed by phy/phylink people.

>  Device Tree can be tested on LX2160A-RDB with the below change which is also
> available in the above referenced patches:
> 
> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
> @@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev)
>         if (error < 0)
>                 goto error_cleanup_mc_io;
> 
> +       mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
>         mc->root_mc_bus_dev = mc_bus_dev;
>         return 0;

I don't know how you expect me to handle this dependency in the networking
tree.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver.
  2020-07-29  0:39 ` [net-next PATCH v7 0/6] ACPI support for dpaa2 " David Miller
@ 2020-07-29  0:42   ` Florian Fainelli
  0 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2020-07-29  0:42 UTC (permalink / raw)
  To: David Miller, calvin.johnson
  Cc: rafael, lenb, Lorenzo.Pieralisi, guohanjun, sudeep.holla, ahs3,
	jeremy.linton, linux, jon, cristian.sovaiala, ioana.ciornei,
	andrew, andy.shevchenko, madalin.bucur, linux-acpi, netdev,
	linux.cj, Paul.Yang



On 7/28/2020 5:39 PM, David Miller wrote:
> From: Calvin Johnson <calvin.johnson@oss.nxp.com>
> Date: Sat, 25 Jul 2020 19:53:58 +0530
> 
>>  This patch series provides ACPI support for dpaa2 MAC driver.
>>  This also introduces ACPI mechanism to get PHYs registered on a
>>  MDIO bus and provide them to be connected to MAC.
>>
>>  Previous discussions on this patchset is available at:
>>  https://lore.kernel.org/linux-acpi/20200715090400.4733-1-calvin.johnson@oss.nxp.com/T/#t
>>
>>  Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
>>  https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
>>  Remaining patches are independent of the above patch and can be applied without
>>  any issues.
> 
> This really needs to be reviewed by phy/phylink people.

Oh it has been reviewed! We just have stalled for various reasons. There
is another email thread with the same subject which is still being
discussed:

https://lore.kernel.org/netdev/20200715090400.4733-1-calvin.johnson@oss.nxp.com/T/#t
-- 
Florian

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver.
  2020-09-25 13:39 ` Grant Likely
@ 2020-09-26  4:34   ` Calvin Johnson
  0 siblings, 0 replies; 12+ messages in thread
From: Calvin Johnson @ 2020-09-26  4:34 UTC (permalink / raw)
  To: Grant Likely
  Cc: Jeremy Linton, Russell King - ARM Linux admin, Jon,
	Cristi Sovaiala, Ioana Ciornei, Andrew Lunn, Andy Shevchenko,
	Florian Fainelli, Madalin Bucur, netdev, linux.cj, linux-acpi,
	nd

Hi Grant,

On Fri, Sep 25, 2020 at 02:39:21PM +0100, Grant Likely wrote:
> On 15/07/2020 10:03, Calvin Johnson wrote:
> >   This patch series provides ACPI support for dpaa2 MAC driver.
> >   This also introduces ACPI mechanism to get PHYs registered on a
> >   MDIO bus and provide them to be connected to MAC.
> > 
> >   Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
> >   https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
> >   Remaining patches are independent of the above patch and can be applied without
> >   any issues.
> > 
> >   Device Tree can be tested on LX2160A-RDB with the below change which is also
> > available in the above referenced patches:
> 
> Hi Calvin,
> 
> In principle, I agree with adding PHY linkage to ACPI, and I sent a comment
> about how the PHYs should be referenced. Unfortunately changing that details
> requires pretty much the entire series to be rewritten (sorry!). I won't do
> any detailed review on patches 2-6 until I see the next version.

Understood. I'll rework on the patches and send a new series.

Thanks
Calvin

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver.
  2020-07-15  9:03 Calvin Johnson
@ 2020-09-25 13:39 ` Grant Likely
  2020-09-26  4:34   ` Calvin Johnson
  0 siblings, 1 reply; 12+ messages in thread
From: Grant Likely @ 2020-09-25 13:39 UTC (permalink / raw)
  To: Calvin Johnson, Jeremy Linton, Russell King - ARM Linux admin,
	Jon, Cristi Sovaiala, Ioana Ciornei, Andrew Lunn,
	Andy Shevchenko, Florian Fainelli, Madalin Bucur
  Cc: netdev, linux.cj, linux-acpi, nd

On 15/07/2020 10:03, Calvin Johnson wrote:
>   This patch series provides ACPI support for dpaa2 MAC driver.
>   This also introduces ACPI mechanism to get PHYs registered on a
>   MDIO bus and provide them to be connected to MAC.
> 
>   Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
>   https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
>   Remaining patches are independent of the above patch and can be applied without
>   any issues.
> 
>   Device Tree can be tested on LX2160A-RDB with the below change which is also
> available in the above referenced patches:

Hi Calvin,

In principle, I agree with adding PHY linkage to ACPI, and I sent a 
comment about how the PHYs should be referenced. Unfortunately changing 
that details requires pretty much the entire series to be rewritten 
(sorry!). I won't do any detailed review on patches 2-6 until I see the 
next version.

g.


> 
> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
> @@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev)
>          if (error < 0)
>                  goto error_cleanup_mc_io;
> 
> +       mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
>          mc->root_mc_bus_dev = mc_bus_dev;
>          return 0;
> 
> 
> Changes in v7:
> - remove unnecessary -ve check for u32 var
> - assign flags to phy_dev
> 
> Changes in v6:
> - change device_mdiobus_register() parameter position
> - improve documentation
> - change device_mdiobus_register() parameter position
> - clean up phylink_fwnode_phy_connect()
> 
> Changes in v5:
> - add description
> - clean up if else
> - rename phy_find_by_fwnode() to phy_find_by_mdio_handle()
> - add docment for phy_find_by_mdio_handle()
> - error out DT in phy_find_by_mdio_handle()
> - clean up err return
> - return -EINVAL for invalid fwnode
> 
> Changes in v4:
> - release fwnode_mdio after use
> - return ERR_PTR instead of NULL
> - introduce device_mdiobus_register()
> 
> Changes in v3:
> - cleanup based on v2 comments
> - Added description for more properties
> - Added MDIO node DSDT entry
> - introduce fwnode_mdio_find_bus()
> - renamed and improved phy_find_by_fwnode()
> - cleanup based on v2 comments
> - move code into phylink_fwnode_phy_connect()
> 
> Changes in v2:
> - clean up dpaa2_mac_get_node()
> - introduce find_phy_device()
> - use acpi_find_child_device()
> 
> Calvin Johnson (6):
>    Documentation: ACPI: DSD: Document MDIO PHY
>    net: phy: introduce device_mdiobus_register()
>    net/fsl: use device_mdiobus_register()
>    net: phy: introduce phy_find_by_mdio_handle()
>    phylink: introduce phylink_fwnode_phy_connect()
>    net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
> 
>   Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
>   .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 70 ++++++++-------
>   drivers/net/ethernet/freescale/xgmac_mdio.c   |  3 +-
>   drivers/net/phy/mdio_bus.c                    | 51 +++++++++++
>   drivers/net/phy/phy_device.c                  | 40 +++++++++
>   drivers/net/phy/phylink.c                     | 32 +++++++
>   include/linux/mdio.h                          |  1 +
>   include/linux/phy.h                           |  2 +
>   include/linux/phylink.h                       |  3 +
>   9 files changed, 260 insertions(+), 32 deletions(-)
>   create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [net-next PATCH v7 0/6]  ACPI support for dpaa2 MAC driver.
@ 2020-07-15  9:03 Calvin Johnson
  2020-09-25 13:39 ` Grant Likely
  0 siblings, 1 reply; 12+ messages in thread
From: Calvin Johnson @ 2020-07-15  9:03 UTC (permalink / raw)
  To: Jeremy Linton, Russell King - ARM Linux admin, Jon,
	Cristi Sovaiala, Ioana Ciornei, Andrew Lunn, Andy Shevchenko,
	Florian Fainelli, Madalin Bucur
  Cc: netdev, linux.cj, linux-acpi, Calvin Johnson

 This patch series provides ACPI support for dpaa2 MAC driver.
 This also introduces ACPI mechanism to get PHYs registered on a
 MDIO bus and provide them to be connected to MAC.

 Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on
 https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8
 Remaining patches are independent of the above patch and can be applied without
 any issues.

 Device Tree can be tested on LX2160A-RDB with the below change which is also
available in the above referenced patches:

--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev)
        if (error < 0)
                goto error_cleanup_mc_io;

+       mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
        mc->root_mc_bus_dev = mc_bus_dev;
        return 0;


Changes in v7:
- remove unnecessary -ve check for u32 var
- assign flags to phy_dev

Changes in v6:
- change device_mdiobus_register() parameter position
- improve documentation
- change device_mdiobus_register() parameter position
- clean up phylink_fwnode_phy_connect()

Changes in v5:
- add description
- clean up if else
- rename phy_find_by_fwnode() to phy_find_by_mdio_handle()
- add docment for phy_find_by_mdio_handle()
- error out DT in phy_find_by_mdio_handle()
- clean up err return
- return -EINVAL for invalid fwnode

Changes in v4:
- release fwnode_mdio after use
- return ERR_PTR instead of NULL
- introduce device_mdiobus_register()

Changes in v3:
- cleanup based on v2 comments
- Added description for more properties
- Added MDIO node DSDT entry
- introduce fwnode_mdio_find_bus()
- renamed and improved phy_find_by_fwnode()
- cleanup based on v2 comments
- move code into phylink_fwnode_phy_connect()

Changes in v2:
- clean up dpaa2_mac_get_node()
- introduce find_phy_device()
- use acpi_find_child_device()

Calvin Johnson (6):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: introduce device_mdiobus_register()
  net/fsl: use device_mdiobus_register()
  net: phy: introduce phy_find_by_mdio_handle()
  phylink: introduce phylink_fwnode_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 70 ++++++++-------
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  3 +-
 drivers/net/phy/mdio_bus.c                    | 51 +++++++++++
 drivers/net/phy/phy_device.c                  | 40 +++++++++
 drivers/net/phy/phylink.c                     | 32 +++++++
 include/linux/mdio.h                          |  1 +
 include/linux/phy.h                           |  2 +
 include/linux/phylink.h                       |  3 +
 9 files changed, 260 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-25 14:23 [net-next PATCH v7 0/6] ACPI support for dpaa2 MAC driver Calvin Johnson
2020-07-25 14:23 ` [net-next PATCH v7 1/6] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
2020-07-25 14:24 ` [net-next PATCH v7 2/6] net: phy: introduce device_mdiobus_register() Calvin Johnson
2020-07-25 14:24 ` [net-next PATCH v7 3/6] net/fsl: use device_mdiobus_register() Calvin Johnson
2020-07-25 14:24 ` [net-next PATCH v7 4/6] net: phy: introduce phy_find_by_mdio_handle() Calvin Johnson
2020-07-25 14:24 ` [net-next PATCH v7 5/6] phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
2020-07-25 14:24 ` [net-next PATCH v7 6/6] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson
2020-07-29  0:39 ` [net-next PATCH v7 0/6] ACPI support for dpaa2 " David Miller
2020-07-29  0:42   ` Florian Fainelli
  -- strict thread matches above, loose matches on Subject: below --
2020-07-15  9:03 Calvin Johnson
2020-09-25 13:39 ` Grant Likely
2020-09-26  4:34   ` Calvin Johnson

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git