Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] Add support for ACPI VIOT
@ 2021-03-16 19:16 Jean-Philippe Brucker
  2021-03-16 19:16 ` [PATCH 1/3] ACPICA: iASL: Add definitions for the VIOT table Jean-Philippe Brucker
                   ` (3 more replies)
  0 siblings, 4 replies; 17+ messages in thread
From: Jean-Philippe Brucker @ 2021-03-16 19:16 UTC (permalink / raw)
  To: rjw, lenb, joro, mst
  Cc: will, linux-acpi, iommu, virtualization, eric.auger,
	sebastien.boeuf, robin.murphy, kevin.tian, lorenzo.pieralisi,
	jean-philippe

Add a driver for the ACPI VIOT table, which enables virtio-iommu on
non-devicetree platforms, including x86. This series depends on the
ACPICA changes of patch 1, which will be included in next release [1]
and pulled into Linux.

The Virtual I/O Translation table (VIOT) describes the topology of
para-virtual I/O translation devices and the endpoints they manage.
It was recently approved for inclusion into the ACPI standard [2].
A provisional version of the specification can be found at [3].

After discussing non-devicetree support for virtio-iommu at length
[4][5][6] we concluded that it should use this new ACPI table. And for
platforms that don't implement either devicetree or ACPI, a structure
that uses roughly the same format [6] can be built into the device.

[1] https://github.com/acpica/acpica/pull/666
[2] https://lore.kernel.org/linux-iommu/20210218233943.GH702808@redhat.com/
[3] https://jpbrucker.net/virtio-iommu/viot/viot-v9.pdf
[4] https://lore.kernel.org/linux-iommu/20191122105000.800410-1-jean-philippe@linaro.org/
[5] https://lore.kernel.org/linux-iommu/20200228172537.377327-1-jean-philippe@linaro.org/
[6] https://lore.kernel.org/linux-iommu/20200821131540.2801801-1-jean-philippe@linaro.org/

Jean-Philippe Brucker (3):
  ACPICA: iASL: Add definitions for the VIOT table
  ACPI: Add driver for the VIOT table
  iommu/virtio: Enable x86 support

 drivers/acpi/Kconfig         |   3 +
 drivers/iommu/Kconfig        |   4 +-
 drivers/acpi/Makefile        |   2 +
 include/acpi/actbl3.h        |  67 ++++++
 include/linux/acpi_viot.h    |  26 +++
 drivers/acpi/bus.c           |   2 +
 drivers/acpi/scan.c          |   6 +
 drivers/acpi/viot.c          | 406 +++++++++++++++++++++++++++++++++++
 drivers/iommu/virtio-iommu.c |   3 +
 MAINTAINERS                  |   8 +
 10 files changed, 526 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/acpi_viot.h
 create mode 100644 drivers/acpi/viot.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, back to index

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-16 19:16 [PATCH 0/3] Add support for ACPI VIOT Jean-Philippe Brucker
2021-03-16 19:16 ` [PATCH 1/3] ACPICA: iASL: Add definitions for the VIOT table Jean-Philippe Brucker
2021-03-18 17:52   ` Auger Eric
2021-04-15 14:36     ` Jean-Philippe Brucker
2021-03-16 19:16 ` [PATCH 2/3] ACPI: Add driver " Jean-Philippe Brucker
2021-03-18 19:36   ` Robin Murphy
2021-04-15 14:31     ` Jean-Philippe Brucker
2021-03-19 10:44   ` Auger Eric
2021-04-15 14:46     ` Jean-Philippe Brucker
2021-03-16 19:16 ` [PATCH 3/3] iommu/virtio: Enable x86 support Jean-Philippe Brucker
2021-03-18 10:44   ` Joerg Roedel
2021-03-18 11:43   ` Robin Murphy
2021-04-15 15:14     ` Jean-Philippe Brucker
2021-03-18 18:28   ` Michael S. Tsirkin
2021-04-15 15:15     ` Jean-Philippe Brucker
2021-03-19 10:58 ` [PATCH 0/3] Add support for ACPI VIOT Auger Eric
2021-03-19 11:16   ` Jean-Philippe Brucker

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git