linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node
@ 2020-11-19 12:11 Shameer Kolothum
  2020-11-19 12:11 ` [RFC PATCH v2 1/8] ACPICA: IORT: Update for revision E Shameer Kolothum
                   ` (10 more replies)
  0 siblings, 11 replies; 34+ messages in thread
From: Shameer Kolothum @ 2020-11-19 12:11 UTC (permalink / raw)
  To: linux-arm-kernel, linux-acpi, iommu, devel
  Cc: linuxarm, lorenzo.pieralisi, joro, robin.murphy, wanghuiqiang,
	guohanjun, jonathan.cameron, steven.price, Sami.Mujawar

RFC v1 --> v2:
 - Added a generic interface for IOMMU drivers to retrieve all the 
   RMR info associated with a given IOMMU.
 - SMMUv3 driver gets the RMR list during probe() and installs
   bypass STEs for all the SIDs in the RMR list. This is to keep
   the ongoing traffic alive(if any) during SMMUv3 reset. This is
   based on the suggestions received for v1 to take care of the
   EFI framebuffer use case. Only sanity tested for now.
 - During the probe/attach device, SMMUv3 driver reserves any
   RMR region associated with the device such that there is a unity
   mapping for them in SMMU.
---    

The series adds support to IORT RMR nodes specified in IORT
Revision E -ARM DEN 0049E[0]. RMR nodes are used to describe memory
ranges that are used by endpoints and require a unity mapping
in SMMU.

We have faced issues with 3408iMR RAID controller cards which
fail to boot when SMMU is enabled. This is because these controllers
make use of host memory for various caching related purposes and when
SMMU is enabled the iMR firmware fails to access these memory regions
as there is no mapping for them. IORT RMR provides a way for UEFI to
describe and report these memory regions so that the kernel can make
a unity mapping for these in SMMU.

RFC because, Patch #1 is to update the actbl2.h and should be done
through acpica update. I have send out a pull request[1] for that.

Tests:

With a UEFI, that reports the RMR for the dev,
....
[16F0h 5872   1]                         Type : 06
[16F1h 5873   2]                       Length : 007C
[16F3h 5875   1]                     Revision : 00
[1038h 0056   2]                     Reserved : 00000000
[1038h 0056   2]                   Identifier : 00000000
[16F8h 5880   4]                Mapping Count : 00000001
[16FCh 5884   4]               Mapping Offset : 00000040

[1700h 5888   4]    Number of RMR Descriptors : 00000002
[1704h 5892   4]        RMR Descriptor Offset : 00000018

[1708h 5896   8]          Base Address of RMR : 0000E6400000
[1710h 5904   8]                Length of RMR : 000000100000
[1718h 5912   4]                     Reserved : 00000000

[171Ch 5916   8]          Base Address of RMR : 0000000027B00000
[1724h 5924   8]                Length of RMR : 0000000000C00000
[172Ch 5932   4]                     Reserved : 00000000

[1730h 5936   4]                   Input base : 00000000
[1734h 5940   4]                     ID Count : 00000001
[1738h 5944   4]                  Output Base : 00000003
[173Ch 5948   4]             Output Reference : 00000064
[1740h 5952   4]        Flags (decoded below) : 00000001
                               Single Mapping : 1
...

Without the series the RAID controller initialization fails as
below,

...
[   12.631117] megaraid_sas 0000:03:00.0: FW supports sync cache        : Yes   
[   12.637360] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009                                                   
[   18.776377] megaraid_sas 0000:03:00.0: Init cmd return status FAILED for SCSI host 0                                                                         
[   23.019383] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state 
[  106.684281] megaraid_sas 0000:03:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0 func:megasas_transition_to_ready                                    
[  106.695186] megaraid_sas 0000:03:00.0: System Register set:                  
[  106.889787] megaraid_sas 0000:03:00.0: Failed to transition controller to ready for scsi0.                                                                   
[  106.910475] megaraid_sas 0000:03:00.0: Failed from megasas_init_fw 6407      
estuary:/$

With the series, now the kernel has direct mapping for the dev as
below,

estuary:/$ cat /sys/kernel/iommu_groups/0/reserved_regions                      
0x0000000008000000 0x00000000080fffff msi                                       
0x0000000027b00000 0x00000000286fffff direct                                    
0x00000000e6400000 0x00000000e64fffff direct                                    
estuary:/$

....
[   12.254318] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009                                                   
[   12.739089] megaraid_sas 0000:03:00.0: FW provided supportMaxExtLDs: 0      max_lds: 32                                                                      
[   12.746628] megaraid_sas 0000:03:00.0: controller type       : iMR(0MB)      
[   12.752694] megaraid_sas 0000:03:00.0: Online Controller Reset(OCR)  : Enabled                                                                               
[   12.759798] megaraid_sas 0000:03:00.0: Secure JBOD support   : Yes           
[   12.765778] megaraid_sas 0000:03:00.0: NVMe passthru support : Yes           
[   12.771931] megaraid_sas 0000:03:00.0: FW provided TM TaskAbort/Reset timeou: 6 secs/60 secs                                                                 
[   12.780503] megaraid_sas 0000:03:00.0: JBOD sequence map support     : Yes   
[   12.787000] megaraid_sas 0000:03:00.0: PCI Lane Margining support    : No    
[   12.819179] megaraid_sas 0000:03:00.0: NVME page size        : (4096)        
[   12.825672] megaraid_sas 0000:03:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000                                                    
[   12.835199] megaraid_sas 0000:03:00.0: INIT adapter done                     
[   12.873932] megaraid_sas 0000:03:00.0: pci id                : (0x1000)/(0x0017)/(0x19e5)/(0xd213)                                                           
[   12.881644] megaraid_sas 0000:03:00.0: unevenspan support    : no            
[   12.887451] megaraid_sas 0000:03:00.0: firmware crash dump   : no            
[   12.893344] megaraid_sas 0000:03:00.0: JBOD sequence map     : enabled       

RAID controller init is now success and can detect the drives
attached as well.

Thanks,
Shameer

[0]. https://developer.arm.com/documentation/den0049/latest/
[1]. https://github.com/acpica/acpica/pull/638

Shameer Kolothum (8):
  ACPICA: IORT: Update for revision E
  ACPI/IORT: Add support for RMR node parsing
  iommu/dma: Introduce generic helper to retrieve RMR info
  ACPI/IORT: Add RMR memory regions reservation helper
  iommu/arm-smmu-v3: Introduce strtab init helper
  iommu/arm-smmu-v3: Add bypass flag to arm_smmu_write_strtab_ent()
  iommu/arm-smmu-v3: Get associated RMR info and install bypass STE
  iommu/arm-smmu-v3: Reserve any RMR regions associated with a dev

 drivers/acpi/arm64/iort.c                   | 182 +++++++++++++++++++-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 112 ++++++++++--
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h |   2 +
 drivers/iommu/dma-iommu.c                   |  39 +++++
 include/acpi/actbl2.h                       |  25 ++-
 include/linux/acpi_iort.h                   |   6 +
 include/linux/dma-iommu.h                   |   7 +
 include/linux/iommu.h                       |  16 ++
 8 files changed, 367 insertions(+), 22 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, other threads:[~2021-04-15 10:37 UTC | newest]

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-19 12:11 [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 1/8] ACPICA: IORT: Update for revision E Shameer Kolothum
2021-03-22 10:36   ` Shameerali Kolothum Thodi
2021-03-22 21:57     ` Kaneda, Erik
2021-03-23 15:53       ` Lorenzo Pieralisi
2021-03-23 18:51         ` Kaneda, Erik
2021-03-24  9:50           ` Lorenzo Pieralisi
2021-03-25  8:40     ` Jon Nettleton
2021-03-25 15:54       ` Shameerali Kolothum Thodi
2021-04-15  7:27   ` Auger Eric
2020-11-19 12:11 ` [RFC PATCH v2 2/8] ACPI/IORT: Add support for RMR node parsing Shameer Kolothum
2021-04-15  9:39   ` Auger Eric
2021-04-15 10:30     ` Shameerali Kolothum Thodi
2020-11-19 12:11 ` [RFC PATCH v2 3/8] iommu/dma: Introduce generic helper to retrieve RMR info Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 4/8] ACPI/IORT: Add RMR memory regions reservation helper Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 5/8] iommu/arm-smmu-v3: Introduce strtab init helper Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 6/8] iommu/arm-smmu-v3: Add bypass flag to arm_smmu_write_strtab_ent() Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 7/8] iommu/arm-smmu-v3: Get associated RMR info and install bypass STE Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 8/8] iommu/arm-smmu-v3: Reserve any RMR regions associated with a dev Shameer Kolothum
2020-12-10 10:25 ` [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node Steven Price
2020-12-14 10:55   ` Shameerali Kolothum Thodi
2020-12-14 12:33     ` Robin Murphy
2020-12-14 13:42       ` Steven Price
2020-12-14 14:47         ` Shameerali Kolothum Thodi
2020-12-17 14:47           ` Jon Nettleton
2020-12-17 15:42             ` Shameerali Kolothum Thodi
2020-12-17 15:53               ` Jon Nettleton
2020-12-18 10:53                 ` Jon Nettleton
2021-01-04  8:55                   ` Shameerali Kolothum Thodi
2021-01-04 10:55                     ` Jon Nettleton
2021-04-09  9:50 ` Auger Eric
2021-04-09 10:08   ` Shameerali Kolothum Thodi
2021-04-15  9:48 ` Auger Eric
2021-04-15 10:37   ` Shameerali Kolothum Thodi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).