Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Ben Widawsky <ben.widawsky@intel.com>
To: "Verma, Vishal L" <vishal.l.verma@intel.com>
Cc: "linux-cxl@vger.kernel.org" <linux-cxl@vger.kernel.org>,
	"Williams, Dan J" <dan.j.williams@intel.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"Schofield, Alison" <alison.schofield@intel.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
	"Weiny, Ira" <ira.weiny@intel.com>
Subject: Re: [PATCH 3/3] cxl/mem: Demarcate vendor specific capability IDs
Date: Thu, 15 Apr 2021 16:50:43 -0700
Message-ID: <20210415235043.xo7hkxftrxkzhix5@intel.com> (raw)
In-Reply-To: <2e570a62f540557d4dda66d90ff73fa841362b45.camel@intel.com>

On 21-04-15 16:37:01, Verma, Vishal L wrote:
> On Thu, 2021-04-15 at 16:27 -0700, Ben Widawsky wrote:
> > Vendor capabilities occupy 0x8000 to 0xFFFF according to CXL 2.0 spec
> > 8.2.8.2.1 CXL Device Capabilities. While they are not defined by the
> > spec, they are allowed and not "unknown". Call this detail out in the
> > logs to let users easily distinguish the difference.
> >
> > v2: Should be greater than or equal to (Ben)
> 
> If there's a v3, drop this to below the '---'. Otherwise note for Dan to
> drop when applying I guess :)
> 

Thanks... This one is an old habit. I'll point out too I messed up the subject
here.

> >
> > Fixes: 8adaf747c9f0b ("cxl/mem: Find device capabilities")
> > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> > ---
> >  drivers/cxl/mem.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> > index c05617b0ba4b..28c7c29567b3 100644
> > --- a/drivers/cxl/mem.c
> > +++ b/drivers/cxl/mem.c
> > @@ -939,7 +939,10 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
> >  cxlm->memdev_regs = register_block;
> >  break;
> >  default:
> > -dev_dbg(dev, "Unknown cap ID: %x (0x%x)\n", cap_id, offset);
> > +if (cap_id >= 0x8000)
> > +dev_dbg(dev, "Vendor cap ID: %x (0x%x)\n", cap_id, offset);
> > +else
> > +dev_dbg(dev, "Unknown cap ID: %x (0x%x)\n", cap_id, offset);
> >  break;
> >  }
> >  }
> 

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 23:26 [PATCH 1/3] cxl/mem: Fix register block offset calculation Ben Widawsky
2021-04-15 23:26 ` [PATCH 2/3] cxl/mem: Print unknown capability IDs as hex Ben Widawsky
2021-04-15 23:34   ` Verma, Vishal L
2021-04-15 23:26 ` [PATCH 3/3] cxl/mem: Demarcate vendor specific capability IDs Ben Widawsky
2021-04-15 23:27   ` Ben Widawsky
2021-04-15 23:37     ` Verma, Vishal L
2021-04-15 23:50       ` Ben Widawsky [this message]
2021-05-19 20:01     ` Dan Williams
2021-04-16  0:29   ` Dan Williams
2021-04-16  0:03 ` [PATCH 1/3] cxl/mem: Fix register block offset calculation Dan Williams
2021-04-16  2:49 ` [PATCH v2] " Ben Widawsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210415235043.xo7hkxftrxkzhix5@intel.com \
    --to=ben.widawsky@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git