linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-gpio@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
Date: Mon, 16 Aug 2021 12:41:19 +0200	[thread overview]
Message-ID: <20210816104119.75019-1-hdegoede@redhat.com> (raw)

Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.

This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.

This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.

Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.

Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.

Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Fix typo in commit msg
-Add Mika's Reviewed-by
-Add Depends-on tag
---
 drivers/gpio/gpiolib-acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 411525ac4cc4..47712b6903b5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 
 	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
 	if (ret)
-		gpiochip_free_own_desc(desc);
+		dev_warn(chip->parent,
+			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
+			 pin, ret);
 
-	return ret ? ERR_PTR(ret) : desc;
+	return desc;
 }
 
 static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
-- 
2.31.1


             reply	other threads:[~2021-08-16 10:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-16 10:41 Hans de Goede [this message]
2021-08-16 12:15 ` [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal Andy Shevchenko
2021-08-16 12:28   ` Hans de Goede
2021-08-23  9:41     ` Andy Shevchenko
2021-09-20 14:43     ` Hans de Goede
2021-09-21 12:13       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816104119.75019-1-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).