From: laurentiu.tudor@nxp.com
To: andriy.shevchenko@linux.intel.com,
heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
rafael@kernel.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: jon@solid-run.com, Laurentiu Tudor <laurentiu.tudor@nxp.com>,
stable@vger.kernel.org
Subject: [PATCH v3] software node: balance refcount for managed sw nodes
Date: Wed, 15 Sep 2021 11:09:39 +0300 [thread overview]
Message-ID: <20210915080939.21388-1-laurentiu.tudor@nxp.com> (raw)
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed
software nodes, thus leading to underflow errors. Balance the refcount by
bumping it in the device_create_managed_software_node() function.
The error [1] was encountered after adding a .shutdown() op to our
fsl-mc-bus driver.
[1]
pc : refcount_warn_saturate+0xf8/0x150
lr : refcount_warn_saturate+0xf8/0x150
sp : ffff80001009b920
x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000
x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030
x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000
x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff
x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607
x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17
x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670
x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000
Call trace:
refcount_warn_saturate+0xf8/0x150
kobject_put+0x10c/0x120
software_node_notify+0xd8/0x140
device_platform_notify+0x4c/0xb4
device_del+0x188/0x424
fsl_mc_device_remove+0x2c/0x4c
rebofind sp.c__fsl_mc_device_remove+0x14/0x2c
device_for_each_child+0x5c/0xac
dprc_remove+0x9c/0xc0
fsl_mc_driver_remove+0x28/0x64
__device_release_driver+0x188/0x22c
device_release_driver+0x30/0x50
bus_remove_device+0x128/0x134
device_del+0x16c/0x424
fsl_mc_bus_remove+0x8c/0x114
fsl_mc_bus_shutdown+0x14/0x20
platform_shutdown+0x28/0x40
device_shutdown+0x15c/0x330
__do_sys_reboot+0x218/0x2a0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common+0x40/0xdc
do_el0_svc+0x2c/0x94
el0_svc+0x2c/0x54
el0t_64_sync_handler+0xa8/0x12c
el0t_64_sync+0x198/0x19c
---[ end trace 32eb1c71c7d86821 ]---
Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()")
Reported-by: Jon Nettleton <jon@solid-run.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: stable@vger.kernel.org
---
Changes since v2:
- added Fixes: tag
- Cc-ed stable
Changes since v1:
- added Heikki's Reviewed-by: (Thanks!)
Changes since RFC:
- use software_node_notify(KOBJ_ADD) instead of directly bumping
refcount (Heikki)
drivers/base/swnode.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index d1f1a8240120..bdb50a06c82a 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -1113,6 +1113,9 @@ int device_create_managed_software_node(struct device *dev,
to_swnode(fwnode)->managed = true;
set_secondary_fwnode(dev, fwnode);
+ if (device_is_registered(dev))
+ software_node_notify(dev, KOBJ_ADD);
+
return 0;
}
EXPORT_SYMBOL_GPL(device_create_managed_software_node);
--
2.17.1
next reply other threads:[~2021-09-15 8:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 8:09 laurentiu.tudor [this message]
2021-09-15 12:02 ` [PATCH v3] software node: balance refcount for managed sw nodes Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915080939.21388-1-laurentiu.tudor@nxp.com \
--to=laurentiu.tudor@nxp.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jon@solid-run.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).