From: Hans de Goede <hdegoede@redhat.com>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Mark Gross <markgross@kernel.org>,
Andy Shevchenko <andy@infradead.org>,
Wolfram Sang <wsa@the-dreams.de>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, Yauhen Kharuzhy <jekhor@gmail.com>,
Tsuchiya Yuto <kitakar@gmail.com>,
platform-driver-x86@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org
Subject: [PATCH v4 02/20] power: supply: bq25890: Rename IILIM field to IINLIM
Date: Mon, 6 Dec 2021 10:33:00 +0100 [thread overview]
Message-ID: <20211206093318.45214-3-hdegoede@redhat.com> (raw)
In-Reply-To: <20211206093318.45214-1-hdegoede@redhat.com>
From: Yauhen Kharuzhy <jekhor@gmail.com>
Rename the Input Current Limit field in the REG00 from IILIM to IINLIM
accordingly with the bq2589x datasheet. This is just cosmetical change
to reduce confusion.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/power/supply/bq25890_charger.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index e62da9dc4f35..fb987579d05a 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -40,7 +40,7 @@ static const char *const bq25890_chip_name[] = {
};
enum bq25890_fields {
- F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
+ F_EN_HIZ, F_EN_ILIM, F_IINLIM, /* Reg00 */
F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */
F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN, /* Reg02 */
@@ -153,7 +153,7 @@ static const struct reg_field bq25890_reg_fields[] = {
/* REG00 */
[F_EN_HIZ] = REG_FIELD(0x00, 7, 7),
[F_EN_ILIM] = REG_FIELD(0x00, 6, 6),
- [F_IILIM] = REG_FIELD(0x00, 0, 5),
+ [F_IINLIM] = REG_FIELD(0x00, 0, 5),
/* REG01 */
[F_BHOT] = REG_FIELD(0x01, 6, 7),
[F_BCOLD] = REG_FIELD(0x01, 5, 5),
@@ -256,7 +256,7 @@ enum bq25890_table_ids {
/* range tables */
TBL_ICHG,
TBL_ITERM,
- TBL_IILIM,
+ TBL_IINLIM,
TBL_VREG,
TBL_BOOSTV,
TBL_SYSVMIN,
@@ -322,7 +322,7 @@ static const union {
/* TODO: BQ25896 has max ICHG 3008 mA */
[TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */
[TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */
- [TBL_IILIM] = { .rt = {100000, 3250000, 50000} }, /* uA */
+ [TBL_IINLIM] = { .rt = {100000, 3250000, 50000} }, /* uA */
[TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */
[TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */
[TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */
@@ -528,11 +528,11 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
- ret = bq25890_field_read(bq, F_IILIM);
+ ret = bq25890_field_read(bq, F_IINLIM);
if (ret < 0)
return ret;
- val->intval = bq25890_find_val(ret, TBL_IILIM);
+ val->intval = bq25890_find_val(ret, TBL_IINLIM);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
--
2.33.1
next prev parent reply other threads:[~2021-12-06 9:33 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 9:32 [PATCH v4 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook Hans de Goede
2021-12-06 9:32 ` [PATCH v4 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier() Hans de Goede
2021-12-06 9:33 ` Hans de Goede [this message]
2021-12-06 9:33 ` [PATCH v4 03/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures Hans de Goede
2021-12-06 9:33 ` [PATCH v4 04/20] power: supply: bq25890: Add a bq25890_rw_init_data() helper Hans de Goede
2021-12-06 9:33 ` [PATCH v4 05/20] power: supply: bq25890: Add support to skip reset at probe() / remove() Hans de Goede
2021-12-06 9:33 ` [PATCH v4 06/20] power: supply: bq25890: Add support to read back the settings from the chip Hans de Goede
2021-12-06 9:33 ` [PATCH v4 07/20] power: supply: bq25890: Enable charging on boards where we skip reset Hans de Goede
2021-12-06 9:33 ` [PATCH v4 08/20] power: supply: bq25890: Drop dev->platform_data == NULL check Hans de Goede
2021-12-06 9:33 ` [PATCH v4 09/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper Hans de Goede
2021-12-06 9:33 ` [PATCH v4 10/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator Hans de Goede
2021-12-06 9:33 ` [PATCH v4 11/20] power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection Hans de Goede
2021-12-06 9:33 ` [PATCH v4 12/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol Hans de Goede
2021-12-06 9:33 ` [PATCH v4 13/20] power: supply: bq25890: Use the devm_regmap_field_bulk_alloc() helper Hans de Goede
2021-12-06 9:33 ` [PATCH v4 14/20] mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic Hans de Goede
2021-12-06 19:55 ` Andy Shevchenko
2021-12-06 21:46 ` Hans de Goede
2021-12-06 22:04 ` Andy Shevchenko
2021-12-17 10:09 ` Lee Jones
2021-12-06 9:33 ` [PATCH v4 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific Hans de Goede
2021-12-06 9:33 ` [PATCH v4 16/20] extcon: intel-cht-wc: Use new cht_wc_model intel_soc_pmic field Hans de Goede
2021-12-16 2:54 ` Chanwoo Choi
2021-12-06 9:33 ` [PATCH v4 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors Hans de Goede
2021-12-16 2:54 ` Chanwoo Choi
2021-12-06 9:33 ` [PATCH v4 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger() Hans de Goede
2021-12-16 2:54 ` Chanwoo Choi
2021-12-06 9:33 ` [PATCH v4 19/20] extcon: intel-cht-wc: Add support for registering a power_supply class-device Hans de Goede
2021-12-16 2:55 ` Chanwoo Choi
2021-12-06 9:33 ` [PATCH v4 20/20] extcon: intel-cht-wc: Report RID_A for ACA adapters Hans de Goede
2021-12-16 2:55 ` Chanwoo Choi
2022-01-30 20:45 [PATCH v4 resend 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook Hans de Goede
2022-01-30 20:45 ` [PATCH v4 02/20] power: supply: bq25890: Rename IILIM field to IINLIM Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211206093318.45214-3-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=ardb@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=jekhor@gmail.com \
--cc=kitakar@gmail.com \
--cc=lee.jones@linaro.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=myungjoo.ham@samsung.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=sre@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).