[PATCH] gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx

[Werner Sembach <wse@tuxedocomputers.com>]

commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However on Clevo NH5xAx/TUXEDO XA15 Gen10 there is a mistake in the ACPI
tables that the TP_ATTN# signal connected to GPIO 10 is configured as
ActiveLow and level triggered but connected to a pull up. As soon as the
system suspends the touchpad loses power and then the system wakes up.

To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 10.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org # v6.1+
---
 drivers/gpio/gpiolib-acpi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index e2ab4d5253bea..82e8e43582eba 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1612,6 +1612,18 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
 			.ignore_wake = "ELAN0415:00@9",
 		},
 	},
+	{
+		/*
+		 * Spurious wakeups from TP_ATTN# pin
+		 * Found in BIOS 1.7.7
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "SYNA1202:00@16",
+		},
+	},
 	{} /* Terminating entry */
 };
 
-- 
2.34.1