Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: "Moore, Robert" <robert.moore@intel.com>
To: Nikolaus Voss <nv@vosn.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>,
	"Schmauss, Erik" <erik.schmauss@intel.com>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	"open list:ACPI COMPONENT ARCHITECTURE (ACPICA)"
	<devel@acpica.org>,
	"linux-leds@vger.kernel.org" <linux-leds@vger.kernel.org>,
	Linux PWM List <linux-pwm@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v2 1/3] ACPI: Resolve objects on host-directed table loads
Date: Tue, 18 Jun 2019 19:35:16 +0000
Message-ID: <94F2FBAB4432B54E8AACC7DFDE6C92E3B95FB032@ORSMSX110.amr.corp.intel.com> (raw)
In-Reply-To: <alpine.DEB.2.20.1906181030240.24846@fox.voss.local>

I'm looking at this. We've changed the initialization of objects in the namespace recently, so I'm checking this out.


> -----Original Message-----
> From: Nikolaus Voss [mailto:nv@vosn.de]
> Sent: Tuesday, June 18, 2019 2:22 AM
> To: Moore, Robert <robert.moore@intel.com>
> Cc: Rafael J. Wysocki <rafael@kernel.org>; Rafael J. Wysocki
> <rjw@rjwysocki.net>; Len Brown <lenb@kernel.org>; Schmauss, Erik
> <erik.schmauss@intel.com>; Jacek Anaszewski
> <jacek.anaszewski@gmail.com>; Pavel Machek <pavel@ucw.cz>; Dan Murphy
> <dmurphy@ti.com>; Thierry Reding <thierry.reding@gmail.com>; ACPI Devel
> Maling List <linux-acpi@vger.kernel.org>; open list:ACPI COMPONENT
> ARCHITECTURE (ACPICA) <devel@acpica.org>; linux-leds@vger.kernel.org;
> Linux PWM List <linux-pwm@vger.kernel.org>; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>
> Subject: RE: [PATCH v2 1/3] ACPI: Resolve objects on host-directed table
> loads
> 
> On Mon, 17 Jun 2019, Moore, Robert wrote:
> >> -----Original Message-----
> >> From: Nikolaus Voss [mailto:nv@vosn.de]
> >> Sent: Sunday, June 16, 2019 11:24 PM
> >> To: Moore, Robert <robert.moore@intel.com>
> >> Cc: Rafael J. Wysocki <rafael@kernel.org>; Rafael J. Wysocki
> >> <rjw@rjwysocki.net>; Len Brown <lenb@kernel.org>; Schmauss, Erik
> >> <erik.schmauss@intel.com>; Jacek Anaszewski
> >> <jacek.anaszewski@gmail.com>; Pavel Machek <pavel@ucw.cz>; Dan Murphy
> >> <dmurphy@ti.com>; Thierry Reding <thierry.reding@gmail.com>; ACPI
> >> Devel Maling List <linux-acpi@vger.kernel.org>; open list:ACPI
> >> COMPONENT ARCHITECTURE (ACPICA) <devel@acpica.org>;
> >> linux-leds@vger.kernel.org; Linux PWM List
> >> <linux-pwm@vger.kernel.org>; Linux Kernel Mailing List
> >> <linux-kernel@vger.kernel.org>; nikolaus.voss@loewensteinmedical.de
> >> Subject: RE: [PATCH v2 1/3] ACPI: Resolve objects on host-directed
> >> table loads
> >>
> >> Bob,
> >>
> >> On Fri, 14 Jun 2019, Moore, Robert wrote:
> >>>
> >>>
> >>> -----Original Message-----
> >>> From: Nikolaus Voss [mailto:nv@vosn.de]
> >>> Sent: Friday, June 14, 2019 2:26 AM
> >>> To: Rafael J. Wysocki <rafael@kernel.org>
> >>> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>; Len Brown
> >>> <lenb@kernel.org>; Moore, Robert <robert.moore@intel.com>; Schmauss,
> >>> Erik <erik.schmauss@intel.com>; Jacek Anaszewski
> >>> <jacek.anaszewski@gmail.com>; Pavel Machek <pavel@ucw.cz>; Dan
> >>> Murphy <dmurphy@ti.com>; Thierry Reding <thierry.reding@gmail.com>;
> >>> ACPI Devel Maling List <linux-acpi@vger.kernel.org>; open list:ACPI
> >>> COMPONENT ARCHITECTURE (ACPICA) <devel@acpica.org>;
> >>> linux-leds@vger.kernel.org; Linux PWM List
> >>> <linux-pwm@vger.kernel.org>; Linux Kernel Mailing List
> >>> <linux-kernel@vger.kernel.org>
> >>> Subject: Re: [PATCH v2 1/3] ACPI: Resolve objects on host-directed
> >>> table loads
> >>>
> >>> Hi Rafael,
> >>>
> >>> On Fri, 14 Jun 2019, Rafael J. Wysocki wrote:
> >>>> On Wed, Jun 12, 2019 at 10:36 AM Nikolaus Voss
> >>>> <nikolaus.voss@loewensteinmedical.de> wrote:
> >>>>>
> >>>>> If an ACPI SSDT overlay is loaded after built-in tables have been
> >>>>> loaded e.g. via configfs or efivar_ssdt_load() it is necessary to
> >>>>> rewalk the namespace to resolve references. Without this, relative
> >>>>> and absolute paths like ^PCI0.SBUS or \_SB.PCI0.SBUS are not
> >>>>> resolved correctly.
> >>>>>
> >>>>> Make configfs load use the same method as efivar_ssdt_load().
> >>>>>
> >>>>> Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
> >>>>
> >>>> This is fine by me, so
> >>>>
> >>>> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>>>
> >>>> Or if you want me to take this patch (without the other two in the
> >>>> series), please let me know.
> >>>
> >>> thanks. I think it would be the best if you take up this patch as it
> >>> is an independent topic. In retrospect it wasn't a good idea to put
> >>> it into this series.
> >>>
> >>> Kind regards,
> >>> Niko
> >>>
> >>> I would have to ask, why is additional code needed for package
> >>> initialization/resolution? It already happens elsewhere in acpica.
> >>> Bob
> >>
> >> for built-in tables loaded via acpi_ex_load_table_op() everything is
> >> fine, because after acpi_tb_load_table() acpi_ns_walk_namespace() is
> >> called to resolve references.
> >>
> >> My fix only affects tables loaded dynamically via either
> >> acpi_configfs driver (for debugging purposes) or efivar_ssdt_load()
> >> (to specify a table on the kernel's command line). They use
> >> acpi_load_table() to load the table from a caller-owned buffer. To
> >> resolve the references, it is again necessary to rewalk the
> >> namespace, which was simply missing in acpi_load_table().
> >>
> > [Moore, Robert]
> >
> > Perhaps you should call AcpiInitializeObjects after the call to
> > AcpiLoadTable, but I will check.
> 
> My usage of acpi_load_table() is to load a SSDT which is the intended
> use of this method according to its description. And my expectation is
> that the package objects of the loaded table are initialized when this
> function successfully returns so it aligns with the behavior of
> acpi_ex_load_table_op() for built-in SSDTs. Otherwise there would be no
> point in having this function at all, because
> acpi_tb_install_and_load_table() could be called directly without any
> difference.
> 
> Niko

  reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-12  8:36 [PATCH v2 0/3] PWM framework: add support referencing PWMs from ACPI Nikolaus Voss
2019-06-12  8:36 ` [PATCH v2 1/3] ACPI: Resolve objects on host-directed table loads Nikolaus Voss
2019-06-14  9:12   ` Rafael J. Wysocki
2019-06-14  9:25     ` Nikolaus Voss
2019-06-14 15:35       ` Moore, Robert
2019-06-17  6:24         ` Nikolaus Voss
2019-06-17 21:18           ` Moore, Robert
2019-06-18  9:21             ` Nikolaus Voss
2019-06-18 19:35               ` Moore, Robert [this message]
2019-06-18 20:22               ` Moore, Robert
2019-06-18 20:24               ` Moore, Robert
2019-06-18 20:31               ` Moore, Robert
2019-06-19  9:31                 ` Nikolaus Voss
2019-06-19 15:59                   ` Moore, Robert
2019-06-20  6:49                     ` Nikolaus Voss
2019-06-22  9:04                       ` Rafael J. Wysocki
2019-06-12  8:36 ` [PATCH v2 2/3] PWM framework: add support referencing PWMs from ACPI Nikolaus Voss
2019-06-12  8:36 ` [PATCH v2 3/3] leds-pwm.c: support ACPI via firmware-node framework Nikolaus Voss
2019-06-21 11:01   ` Pavel Machek

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94F2FBAB4432B54E8AACC7DFDE6C92E3B95FB032@ORSMSX110.amr.corp.intel.com \
    --to=robert.moore@intel.com \
    --cc=devel@acpica.org \
    --cc=dmurphy@ti.com \
    --cc=erik.schmauss@intel.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=nv@vosn.de \
    --cc=pavel@ucw.cz \
    --cc=rafael@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org linux-acpi@archiver.kernel.org
	public-inbox-index linux-acpi


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/ public-inbox