linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: tanxiaofei <tanxiaofei@huawei.com>
To: <james.morse@arm.com>, <lenb@kernel.org>
Cc: <rafael@kernel.org>, <rjw@rjwysocki.net>, <tony.luck@intel.com>,
	<bp@alien8.de>, <akpm@linux-foundation.org>, <jroedel@suse.de>,
	<peterz@infradead.org>, <linux-acpi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linuxarm@huawei.com>
Subject: Re: [PATCH v5] ACPI / APEI: fix the regression of synchronous external aborts occur in user-mode
Date: Tue, 26 Jan 2021 21:32:09 +0800	[thread overview]
Message-ID: <94a38a33-a949-3cce-d617-e1476912596e@huawei.com> (raw)
In-Reply-To: <1607602177-1507-1-git-send-email-tanxiaofei@huawei.com>

@James
Hi James, please help to review this patch. Thank you very much. :)

On 2020/12/10 20:09, Xiaofei Tan wrote:
> After the commit 8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea()
> synchronise with APEI's irq work") applied, do_sea() return directly
> for user-mode if apei_claim_sea() handled any error record. Therefore,
> each error record reported by the user-mode SEA must be effectively
> processed in APEI GHES driver.
>
> Currently, GHES driver only processes Memory Error Section.(Ignore PCIe
> Error Section, as it has nothing to do with SEA). It is not enough.
> Because ARM Processor Error could also be used for SEA in some hardware
> platforms, such as Kunpeng9xx series. We can't ask them to switch to
> use Memory Error Section for two reasons:
> 1)The server was delivered to customers, and it will introduce
> compatibility issue.
> 2)It make sense to use ARM Processor Error Section. Because either
> cache or memory errors could generate SEA when consumed by a processor.
>
> Do memory failure handling for ARM Processor Error Section just like
> for Memory Error Section.
>
> Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
> ---
> Changes since v4:
> - 1. Change the patch name from " ACPI / APEI: do memory failure on the
> physical address reported by ARM processor error section" to this
> more proper one.
> - 2. Add a comment in the code to tell why not filter out corrected
> error in an uncorrected section.
>
> Changes since v3:
> - Print unhandled error following James Morse's advice.
>
> Changes since v2:
> - Updated commit log
> ---
>  drivers/acpi/apei/ghes.c | 76 +++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 59 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index fce7ade..0893968 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -441,28 +441,35 @@ static void ghes_kick_task_work(struct callback_head *head)
>  	gen_pool_free(ghes_estatus_pool, (unsigned long)estatus_node, node_len);
>  }
>
> -static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
> -				       int sev)
> +static bool ghes_do_memory_failure(u64 physical_addr, int flags)
>  {
>  	unsigned long pfn;
> -	int flags = -1;
> -	int sec_sev = ghes_severity(gdata->error_severity);
> -	struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
>
>  	if (!IS_ENABLED(CONFIG_ACPI_APEI_MEMORY_FAILURE))
>  		return false;
>
> -	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
> -		return false;
> -
> -	pfn = mem_err->physical_addr >> PAGE_SHIFT;
> +	pfn = PHYS_PFN(physical_addr);
>  	if (!pfn_valid(pfn)) {
>  		pr_warn_ratelimited(FW_WARN GHES_PFX
>  		"Invalid address in generic error data: %#llx\n",
> -		mem_err->physical_addr);
> +		physical_addr);
>  		return false;
>  	}
>
> +	memory_failure_queue(pfn, flags);
> +	return true;
> +}
> +
> +static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
> +				       int sev)
> +{
> +	int flags = -1;
> +	int sec_sev = ghes_severity(gdata->error_severity);
> +	struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
> +
> +	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
> +		return false;
> +
>  	/* iff following two events can be handled properly by now */
>  	if (sec_sev == GHES_SEV_CORRECTED &&
>  	    (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED))
> @@ -470,14 +477,51 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
>  	if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE)
>  		flags = 0;
>
> -	if (flags != -1) {
> -		memory_failure_queue(pfn, flags);
> -		return true;
> -	}
> +	if (flags != -1)
> +		return ghes_do_memory_failure(mem_err->physical_addr, flags);
>
>  	return false;
>  }
>
> +static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int sev)
> +{
> +	struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
> +	struct cper_arm_err_info *err_info;
> +	bool queued = false;
> +	int sec_sev, i;
> +
> +	log_arm_hw_error(err);
> +
> +	sec_sev = ghes_severity(gdata->error_severity);
> +	if (sev != GHES_SEV_RECOVERABLE || sec_sev != GHES_SEV_RECOVERABLE)
> +		return false;
> +
> +	err_info = (struct cper_arm_err_info *) (err + 1);
> +	for (i = 0; i < err->err_info_num; i++, err_info++) {
> +		bool is_cache = (err_info->type == CPER_ARM_CACHE_ERROR);
> +		bool has_pa = (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR);
> +
> +		/*
> +		 * The field (err_info->error_info & BIT(26)) is fixed to set to
> +		 * 1 in some old firmware of HiSilicon Kunpeng920. We assume that
> +		 * firmware won't mix corrected errors in an uncorrected section,
> +		 * and don't filter out 'corrected' error here.
> +		 */
> +		if (!is_cache || !has_pa) {
> +			pr_warn_ratelimited(FW_WARN GHES_PFX
> +			"Unhandled processor error type %s\n",
> +			err_info->type < ARRAY_SIZE(cper_proc_error_type_strs) ?
> +			cper_proc_error_type_strs[err_info->type] : "unknown error");
> +			continue;
> +		}
> +
> +		if (ghes_do_memory_failure(err_info->physical_fault_addr, 0))
> +			queued = true;
> +	}
> +
> +	return queued;
> +}
> +
>  /*
>   * PCIe AER errors need to be sent to the AER driver for reporting and
>   * recovery. The GHES severities map to the following AER severities and
> @@ -605,9 +649,7 @@ static bool ghes_do_proc(struct ghes *ghes,
>  			ghes_handle_aer(gdata);
>  		}
>  		else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
> -			struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
> -
> -			log_arm_hw_error(err);
> +			queued = ghes_handle_arm_hw_error(gdata, sev);
>  		} else {
>  			void *err = acpi_hest_get_payload(gdata);
>
>


  reply	other threads:[~2021-01-26 13:33 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10 12:09 [PATCH v5] ACPI / APEI: fix the regression of synchronous external aborts occur in user-mode Xiaofei Tan
2021-01-26 13:32 ` tanxiaofei [this message]
2021-02-05 12:55   ` Rafael J. Wysocki
2021-04-10  7:09     ` Xiaofei Tan
2021-05-11  1:31 ` Xiaofei Tan
2021-05-24  2:02 ` Xiaofei Tan
2021-06-04 14:19 ` James Morse
2021-06-05  8:59   ` Xiaofei Tan
2021-06-08  9:15     ` Xiaofei Tan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94a38a33-a949-3cce-d617-e1476912596e@huawei.com \
    --to=tanxiaofei@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@alien8.de \
    --cc=james.morse@arm.com \
    --cc=jroedel@suse.de \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=peterz@infradead.org \
    --cc=rafael@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).