linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
@ 2021-08-16 10:41 Hans de Goede
  2021-08-16 12:15 ` Andy Shevchenko
  0 siblings, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2021-08-16 10:41 UTC (permalink / raw)
  To: Mika Westerberg, Andy Shevchenko, Linus Walleij
  Cc: Hans de Goede, linux-gpio, linux-acpi

Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.

This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.

This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.

Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.

Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.

Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Fix typo in commit msg
-Add Mika's Reviewed-by
-Add Depends-on tag
---
 drivers/gpio/gpiolib-acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 411525ac4cc4..47712b6903b5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 
 	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
 	if (ret)
-		gpiochip_free_own_desc(desc);
+		dev_warn(chip->parent,
+			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
+			 pin, ret);
 
-	return ret ? ERR_PTR(ret) : desc;
+	return desc;
 }
 
 static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
-- 
2.31.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
  2021-08-16 10:41 [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal Hans de Goede
@ 2021-08-16 12:15 ` Andy Shevchenko
  2021-08-16 12:28   ` Hans de Goede
  0 siblings, 1 reply; 6+ messages in thread
From: Andy Shevchenko @ 2021-08-16 12:15 UTC (permalink / raw)
  To: Hans de Goede; +Cc: Mika Westerberg, Linus Walleij, linux-gpio, linux-acpi

On Mon, Aug 16, 2021 at 12:41:19PM +0200, Hans de Goede wrote:
> Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
> made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
> GPIOs.
> 
> This in itself is fine, but it also made gpio_set_debounce_timeout()
> errors fatal, causing the requesting of the GPIO to fail. This is causing
> regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
> ACPI event sources specify a debouncy timeout of 20 ms, but the
> pinctrl-baytrail.c only supports certain fixed values, the closest
> ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
> when specified a value which is not one of the fixed values.
> 
> This is causing the acpi_request_own_gpiod() call to fail for 3
> ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
> e.g. the battery charging vs discharging status to never get updated,
> even though a charger has been plugged-in or unplugged.
> 
> Make gpio_set_debounce_timeout() errors non fatal, warning about the
> failure instead, to fix this regression.
> 
> Note we should probably also fix various pinctrl drivers to just
> pick the first bigger discrete value rather then returning -EINVAL but
> this will need to be done on a per driver basis, where as this fix
> at least gets us back to where things were before and thus restores
> functionality on devices where this was lost due to
> gpio_set_debounce_timeout() errors.

Yes, I also think that we need to choose upper debounce instead of rejecting
the settings. And yes, I agree that for now it's not suitable as a fix.

That said,
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
> Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Fix typo in commit msg
> -Add Mika's Reviewed-by
> -Add Depends-on tag
> ---
>  drivers/gpio/gpiolib-acpi.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
> index 411525ac4cc4..47712b6903b5 100644
> --- a/drivers/gpio/gpiolib-acpi.c
> +++ b/drivers/gpio/gpiolib-acpi.c
> @@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
>  
>  	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
>  	if (ret)
> -		gpiochip_free_own_desc(desc);
> +		dev_warn(chip->parent,
> +			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
> +			 pin, ret);
>  
> -	return ret ? ERR_PTR(ret) : desc;
> +	return desc;
>  }
>  
>  static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
> -- 
> 2.31.1
> 

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
  2021-08-16 12:15 ` Andy Shevchenko
@ 2021-08-16 12:28   ` Hans de Goede
  2021-08-23  9:41     ` Andy Shevchenko
  2021-09-20 14:43     ` Hans de Goede
  0 siblings, 2 replies; 6+ messages in thread
From: Hans de Goede @ 2021-08-16 12:28 UTC (permalink / raw)
  To: Andy Shevchenko; +Cc: Mika Westerberg, Linus Walleij, linux-gpio, linux-acpi

Hi,

On 8/16/21 2:15 PM, Andy Shevchenko wrote:
> On Mon, Aug 16, 2021 at 12:41:19PM +0200, Hans de Goede wrote:
>> Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
>> made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
>> GPIOs.
>>
>> This in itself is fine, but it also made gpio_set_debounce_timeout()
>> errors fatal, causing the requesting of the GPIO to fail. This is causing
>> regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
>> ACPI event sources specify a debouncy timeout of 20 ms, but the
>> pinctrl-baytrail.c only supports certain fixed values, the closest
>> ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
>> when specified a value which is not one of the fixed values.
>>
>> This is causing the acpi_request_own_gpiod() call to fail for 3
>> ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
>> e.g. the battery charging vs discharging status to never get updated,
>> even though a charger has been plugged-in or unplugged.
>>
>> Make gpio_set_debounce_timeout() errors non fatal, warning about the
>> failure instead, to fix this regression.
>>
>> Note we should probably also fix various pinctrl drivers to just
>> pick the first bigger discrete value rather then returning -EINVAL but
>> this will need to be done on a per driver basis, where as this fix
>> at least gets us back to where things were before and thus restores
>> functionality on devices where this was lost due to
>> gpio_set_debounce_timeout() errors.
> 
> Yes, I also think that we need to choose upper debounce instead of rejecting
> the settings. And yes, I agree that for now it's not suitable as a fix.
> 
> That said,
> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Thank you.

FYI, I've prepared a patch to choose the upper debounce time for
pintctrl-baytrail . I'll test it when I'm back home tonight and
then submit it upstream.

Regards,

Hans




> 
>> Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
>> Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
>> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Fix typo in commit msg
>> -Add Mika's Reviewed-by
>> -Add Depends-on tag
>> ---
>>  drivers/gpio/gpiolib-acpi.c | 6 ++++--
>>  1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
>> index 411525ac4cc4..47712b6903b5 100644
>> --- a/drivers/gpio/gpiolib-acpi.c
>> +++ b/drivers/gpio/gpiolib-acpi.c
>> @@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
>>  
>>  	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
>>  	if (ret)
>> -		gpiochip_free_own_desc(desc);
>> +		dev_warn(chip->parent,
>> +			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
>> +			 pin, ret);
>>  
>> -	return ret ? ERR_PTR(ret) : desc;
>> +	return desc;
>>  }
>>  
>>  static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
>> -- 
>> 2.31.1
>>
> 


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
  2021-08-16 12:28   ` Hans de Goede
@ 2021-08-23  9:41     ` Andy Shevchenko
  2021-09-20 14:43     ` Hans de Goede
  1 sibling, 0 replies; 6+ messages in thread
From: Andy Shevchenko @ 2021-08-23  9:41 UTC (permalink / raw)
  To: Hans de Goede; +Cc: Mika Westerberg, Linus Walleij, linux-gpio, linux-acpi

On Mon, Aug 16, 2021 at 02:28:07PM +0200, Hans de Goede wrote:
> On 8/16/21 2:15 PM, Andy Shevchenko wrote:
> > On Mon, Aug 16, 2021 at 12:41:19PM +0200, Hans de Goede wrote:
> >> Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
> >> made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
> >> GPIOs.
> >>
> >> This in itself is fine, but it also made gpio_set_debounce_timeout()
> >> errors fatal, causing the requesting of the GPIO to fail. This is causing
> >> regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
> >> ACPI event sources specify a debouncy timeout of 20 ms, but the
> >> pinctrl-baytrail.c only supports certain fixed values, the closest
> >> ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
> >> when specified a value which is not one of the fixed values.
> >>
> >> This is causing the acpi_request_own_gpiod() call to fail for 3
> >> ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
> >> e.g. the battery charging vs discharging status to never get updated,
> >> even though a charger has been plugged-in or unplugged.
> >>
> >> Make gpio_set_debounce_timeout() errors non fatal, warning about the
> >> failure instead, to fix this regression.
> >>
> >> Note we should probably also fix various pinctrl drivers to just
> >> pick the first bigger discrete value rather then returning -EINVAL but
> >> this will need to be done on a per driver basis, where as this fix
> >> at least gets us back to where things were before and thus restores
> >> functionality on devices where this was lost due to
> >> gpio_set_debounce_timeout() errors.
> > 
> > Yes, I also think that we need to choose upper debounce instead of rejecting
> > the settings. And yes, I agree that for now it's not suitable as a fix.
> > 
> > That said,
> > Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> Thank you.
> 
> FYI, I've prepared a patch to choose the upper debounce time for
> pintctrl-baytrail . I'll test it when I'm back home tonight and
> then submit it upstream.

Bart, can you pick this up? Or do you expect me to send a PR with this one?

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
  2021-08-16 12:28   ` Hans de Goede
  2021-08-23  9:41     ` Andy Shevchenko
@ 2021-09-20 14:43     ` Hans de Goede
  2021-09-21 12:13       ` Andy Shevchenko
  1 sibling, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2021-09-20 14:43 UTC (permalink / raw)
  To: Andy Shevchenko; +Cc: Mika Westerberg, Linus Walleij, linux-gpio, linux-acpi

Hi,

On 8/16/21 2:28 PM, Hans de Goede wrote:
> Hi,
> 
> On 8/16/21 2:15 PM, Andy Shevchenko wrote:
>> On Mon, Aug 16, 2021 at 12:41:19PM +0200, Hans de Goede wrote:
>>> Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
>>> made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
>>> GPIOs.
>>>
>>> This in itself is fine, but it also made gpio_set_debounce_timeout()
>>> errors fatal, causing the requesting of the GPIO to fail. This is causing
>>> regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
>>> ACPI event sources specify a debouncy timeout of 20 ms, but the
>>> pinctrl-baytrail.c only supports certain fixed values, the closest
>>> ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
>>> when specified a value which is not one of the fixed values.
>>>
>>> This is causing the acpi_request_own_gpiod() call to fail for 3
>>> ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
>>> e.g. the battery charging vs discharging status to never get updated,
>>> even though a charger has been plugged-in or unplugged.
>>>
>>> Make gpio_set_debounce_timeout() errors non fatal, warning about the
>>> failure instead, to fix this regression.
>>>
>>> Note we should probably also fix various pinctrl drivers to just
>>> pick the first bigger discrete value rather then returning -EINVAL but
>>> this will need to be done on a per driver basis, where as this fix
>>> at least gets us back to where things were before and thus restores
>>> functionality on devices where this was lost due to
>>> gpio_set_debounce_timeout() errors.
>>
>> Yes, I also think that we need to choose upper debounce instead of rejecting
>> the settings. And yes, I agree that for now it's not suitable as a fix.
>>
>> That said,
>> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> Thank you.
> 
> FYI, I've prepared a patch to choose the upper debounce time for
> pintctrl-baytrail . I'll test it when I'm back home tonight and
> then submit it upstream.

Ugh, I just noticed that this is still not upstream (not in v5.15-rc2), while this is
a regression fix!

Can we please get this merged and send to Linus ASAP ?

Regards,

Hans



>>> Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
>>> Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
>>> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>> ---
>>> Changes in v2:
>>> -Fix typo in commit msg
>>> -Add Mika's Reviewed-by
>>> -Add Depends-on tag
>>> ---
>>>  drivers/gpio/gpiolib-acpi.c | 6 ++++--
>>>  1 file changed, 4 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
>>> index 411525ac4cc4..47712b6903b5 100644
>>> --- a/drivers/gpio/gpiolib-acpi.c
>>> +++ b/drivers/gpio/gpiolib-acpi.c
>>> @@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
>>>  
>>>  	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
>>>  	if (ret)
>>> -		gpiochip_free_own_desc(desc);
>>> +		dev_warn(chip->parent,
>>> +			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
>>> +			 pin, ret);
>>>  
>>> -	return ret ? ERR_PTR(ret) : desc;
>>> +	return desc;
>>>  }
>>>  
>>>  static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
>>> -- 
>>> 2.31.1
>>>
>>


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal
  2021-09-20 14:43     ` Hans de Goede
@ 2021-09-21 12:13       ` Andy Shevchenko
  0 siblings, 0 replies; 6+ messages in thread
From: Andy Shevchenko @ 2021-09-21 12:13 UTC (permalink / raw)
  To: Hans de Goede
  Cc: Andy Shevchenko, Mika Westerberg, Linus Walleij, linux-gpio, linux-acpi

On Mon, Sep 20, 2021 at 7:47 PM Hans de Goede <hdegoede@redhat.com> wrote:
> On 8/16/21 2:28 PM, Hans de Goede wrote:
> > On 8/16/21 2:15 PM, Andy Shevchenko wrote:
> >> On Mon, Aug 16, 2021 at 12:41:19PM +0200, Hans de Goede wrote:

...

> >> Yes, I also think that we need to choose upper debounce instead of rejecting
> >> the settings. And yes, I agree that for now it's not suitable as a fix.
> >>
> >> That said,
> >> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> >
> > Thank you.
> >
> > FYI, I've prepared a patch to choose the upper debounce time for
> > pintctrl-baytrail . I'll test it when I'm back home tonight and
> > then submit it upstream.
>
> Ugh, I just noticed that this is still not upstream (not in v5.15-rc2), while this is
> a regression fix!

I think it was late for Bart to pick this up.

> Can we please get this merged and send to Linus ASAP ?

I'm on vacations now, but if Mika or Bart or Linus can handle this, my
tag is there :)

-- 
With Best Regards,
Andy Shevchenko

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-09-21 12:14 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-16 10:41 [PATCH regression fix v2] gpiolib: acpi: Make set-debounce-timeout failures non fatal Hans de Goede
2021-08-16 12:15 ` Andy Shevchenko
2021-08-16 12:28   ` Hans de Goede
2021-08-23  9:41     ` Andy Shevchenko
2021-09-20 14:43     ` Hans de Goede
2021-09-21 12:13       ` Andy Shevchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).