Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains
@ 2019-08-21 14:52 Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 1/4] ACPI: Support Generic Initiator only domains Jonathan Cameron
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Jonathan Cameron @ 2019-08-21 14:52 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-kernel, linux-arm-kernel
  Cc: Keith Busch, jglisse, Rafael J . Wysocki, linuxarm,
	Andrew Morton, Dan Williams, Jonathan Cameron

This patch set has been sitting around for a long time without significant
review.  I would appreciate it very much if anyone has time to take a look.

One outstanding question to highlight in this series is whether
we should assume all ACPI supporting architectures support Generic
Initiator domains, or whether to introduce an
ARCH_HAS_GENERIC_INITIATOR_DOMAINS entry in Kconfig.

Change since V3.
* Rebase.

Changes since RFC V2.
* RFC dropped as now we have x86 support, so the lack of guards in in the
  ACPI code etc should now be fine.
* Added x86 support.  Note this has only been tested on QEMU as I don't have
  a convenient x86 NUMA machine to play with.  Note that this fitted together
  rather differently form arm64 so I'm particularly interested in feedback
  on the two solutions.

Since RFC V1.
* Fix incorrect interpretation of the ACPI entry noted by Keith Busch
* Use the acpica headers definitions that are now in mmotm.

It's worth noting that, to safely put a given device in a GI node, may
require changes to the existing drivers as it's not unusual to assume
you have local memory or processor core. There may be further constraints
not yet covered by this patch.

Original cover letter...

ACPI 6.3 introduced a new entity that can be part of a NUMA proximity domain.
It may share such a domain with the existing options (memory, CPU etc) but it
may also exist on it's own.

The intent is to allow the description of the NUMA properties (particularly
via HMAT) of accelerators and other initiators of memory activity that are not
the host processor running the operating system.

This patch set introduces 'just enough' to make them work for arm64 and x86.
It should be trivial to support other architectures, I just don't suitable
NUMA systems readily available to test.

There are a few quirks that need to be considered.

1. Fall back nodes
******************

As pre ACPI 6.3 supporting operating systems do not have Generic Initiator
Proximity Domains it is possible to specify, via _PXM in DSDT that another
device is part of such a GI only node.  This currently blows up spectacularly.

Whilst we can obviously 'now' protect against such a situation (see the related
thread on PCI _PXM support and the  threadripper board identified there as
also falling into the  problem of using non existent nodes
https://patchwork.kernel.org/patch/10723311/ ), there is no way to  be sure
we will never have legacy OSes that are not protected  against this.  It would
also be 'non ideal' to fallback to  a default node as there may be a better
(non GI) node to pick  if GI nodes aren't available.

The work around is that we also have a new system wide OSC bit that allows
an operating system to 'announce' that it supports Generic Initiators.  This
allows, the firmware to us DSDT magic to 'move' devices between the nodes
dependent on whether our new nodes are there or not.

2. New ways of assigning a proximity domain for devices
*******************************************************

Until now, the only way firmware could indicate that a particular device
(outside the 'special' set of cpus etc) was to be found in a particular
Proximity Domain by the use of _PXM in DSDT.

That is equally valid with GI domains, but we have new options. The SRAT
affinity structure includes a handle (ACPI or PCI) to identify devices
with the system and specify their proximity domain that way.  If both _PXM
and this are provided, they should give the same answer.

For now this patch set completely ignores that feature as we don't need
it to start the discussion.  It will form a follow up set at some point
(if no one else fancies doing it).
 

Jonathan Cameron (4):
  ACPI: Support Generic Initiator only domains
  arm64: Support Generic Initiator only domains
  x86: Support Generic Initiator only proximity domains
  ACPI: Let ACPI know we support Generic Initiator Affinity Structures

 arch/arm64/kernel/smp.c        |  8 +++++
 arch/x86/include/asm/numa.h    |  2 ++
 arch/x86/kernel/setup.c        |  1 +
 arch/x86/mm/numa.c             | 14 ++++++++
 drivers/acpi/bus.c             |  1 +
 drivers/acpi/numa.c            | 62 +++++++++++++++++++++++++++++++++-
 drivers/base/node.c            |  3 ++
 include/asm-generic/topology.h |  3 ++
 include/linux/acpi.h           |  1 +
 include/linux/nodemask.h       |  1 +
 include/linux/topology.h       |  7 ++++
 11 files changed, 102 insertions(+), 1 deletion(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 1/4] ACPI: Support Generic Initiator only domains
  2019-08-21 14:52 [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains Jonathan Cameron
@ 2019-08-21 14:52 ` Jonathan Cameron
  2019-09-02 21:26   ` Rafael J. Wysocki
  2019-08-21 14:52 ` [PATCH 2/4] arm64: " Jonathan Cameron
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 7+ messages in thread
From: Jonathan Cameron @ 2019-08-21 14:52 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-kernel, linux-arm-kernel
  Cc: Keith Busch, jglisse, Rafael J . Wysocki, linuxarm,
	Andrew Morton, Dan Williams, Jonathan Cameron

Generic Initiators are a new ACPI concept that allows for the
description of proximity domains that contain a device which
performs memory access (such as a network card) but neither
host CPU nor Memory.

This patch has the parsing code and provides the infrastructure
for an architecture to associate these new domains with their
nearest memory processing node.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/numa.c            | 62 +++++++++++++++++++++++++++++++++-
 drivers/base/node.c            |  3 ++
 include/asm-generic/topology.h |  3 ++
 include/linux/nodemask.h       |  1 +
 include/linux/topology.h       |  7 ++++
 5 files changed, 75 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index eadbf90e65d1..fe34315a9234 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -170,6 +170,38 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
 		}
 		break;
 
+	case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
+	{
+		struct acpi_srat_generic_affinity *p =
+			(struct acpi_srat_generic_affinity *)header;
+		char name[9] = {};
+
+		if (p->device_handle_type == 0) {
+			/*
+			 * For pci devices this may be the only place they
+			 * are assigned a proximity domain
+			 */
+			pr_debug("SRAT Generic Initiator(Seg:%u BDF:%u) in proximity domain %d %s\n",
+				 *(u16 *)(&p->device_handle[0]),
+				 *(u16 *)(&p->device_handle[2]),
+				 p->proximity_domain,
+				 (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
+				"enabled" : "disabled");
+		} else {
+			/*
+			 * In this case we can rely on the device having a
+			 * proximity domain reference
+			 */
+			memcpy(name, p->device_handle, 8);
+			pr_info("SRAT Generic Initiator(HID=%.8s UID=%.4s) in proximity domain %d %s\n",
+				(char *)(&p->device_handle[0]),
+				(char *)(&p->device_handle[8]),
+				p->proximity_domain,
+				(p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
+				"enabled" : "disabled");
+		}
+	}
+	break;
 	default:
 		pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",
 			header->type);
@@ -378,6 +410,32 @@ acpi_parse_gicc_affinity(union acpi_subtable_headers *header,
 	return 0;
 }
 
+static int __init
+acpi_parse_gi_affinity(union acpi_subtable_headers *header,
+		       const unsigned long end)
+{
+	struct acpi_srat_generic_affinity *gi_affinity;
+	int node;
+
+	gi_affinity = (struct acpi_srat_generic_affinity *)header;
+	if (!gi_affinity)
+		return -EINVAL;
+	acpi_table_print_srat_entry(&header->common);
+
+	if (!(gi_affinity->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED))
+		return -EINVAL;
+
+	node = acpi_map_pxm_to_node(gi_affinity->proximity_domain);
+	if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
+		pr_err("SRAT: Too many proximity domains.\n");
+		return -EINVAL;
+	}
+	node_set(node, numa_nodes_parsed);
+	node_set_state(node, N_GENERIC_INITIATOR);
+
+	return 0;
+}
+
 static int __initdata parsed_numa_memblks;
 
 static int __init
@@ -433,7 +491,7 @@ int __init acpi_numa_init(void)
 
 	/* SRAT: System Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
-		struct acpi_subtable_proc srat_proc[3];
+		struct acpi_subtable_proc srat_proc[4];
 
 		memset(srat_proc, 0, sizeof(srat_proc));
 		srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY;
@@ -442,6 +500,8 @@ int __init acpi_numa_init(void)
 		srat_proc[1].handler = acpi_parse_x2apic_affinity;
 		srat_proc[2].id = ACPI_SRAT_TYPE_GICC_AFFINITY;
 		srat_proc[2].handler = acpi_parse_gicc_affinity;
+		srat_proc[3].id = ACPI_SRAT_TYPE_GENERIC_AFFINITY;
+		srat_proc[3].handler = acpi_parse_gi_affinity;
 
 		acpi_table_parse_entries_array(ACPI_SIG_SRAT,
 					sizeof(struct acpi_table_srat),
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 75b7e6f6535b..6f60689af5f8 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -980,6 +980,8 @@ static struct node_attr node_state_attr[] = {
 #endif
 	[N_MEMORY] = _NODE_ATTR(has_memory, N_MEMORY),
 	[N_CPU] = _NODE_ATTR(has_cpu, N_CPU),
+	[N_GENERIC_INITIATOR] = _NODE_ATTR(has_generic_initiator,
+					   N_GENERIC_INITIATOR),
 };
 
 static struct attribute *node_state_attrs[] = {
@@ -991,6 +993,7 @@ static struct attribute *node_state_attrs[] = {
 #endif
 	&node_state_attr[N_MEMORY].attr.attr,
 	&node_state_attr[N_CPU].attr.attr,
+	&node_state_attr[N_GENERIC_INITIATOR].attr.attr,
 	NULL
 };
 
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
index 238873739550..54d0b4176a45 100644
--- a/include/asm-generic/topology.h
+++ b/include/asm-generic/topology.h
@@ -71,6 +71,9 @@
 #ifndef set_cpu_numa_mem
 #define set_cpu_numa_mem(cpu, node)
 #endif
+#ifndef set_gi_numa_mem
+#define set_gi_numa_mem(gi, node)
+#endif
 
 #endif	/* !CONFIG_NUMA || !CONFIG_HAVE_MEMORYLESS_NODES */
 
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 27e7fa36f707..1aebf766fb52 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -399,6 +399,7 @@ enum node_states {
 #endif
 	N_MEMORY,		/* The node has memory(regular, high, movable) */
 	N_CPU,		/* The node has one or more cpus */
+	N_GENERIC_INITIATOR,	/* The node is a GI only node */
 	NR_NODE_STATES
 };
 
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 47a3e3c08036..2f97754e0508 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -125,6 +125,13 @@ static inline void set_numa_mem(int node)
 }
 #endif
 
+#ifndef set_gi_numa_mem
+static inline void set_gi_numa_mem(int gi, int node)
+{
+	_node_numa_mem_[gi] = node;
+}
+#endif
+
 #ifndef node_to_mem_node
 static inline int node_to_mem_node(int node)
 {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/4] arm64: Support Generic Initiator only domains
  2019-08-21 14:52 [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 1/4] ACPI: Support Generic Initiator only domains Jonathan Cameron
@ 2019-08-21 14:52 ` " Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 3/4] x86: Support Generic Initiator only proximity domains Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 4/4] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron
  3 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2019-08-21 14:52 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-kernel, linux-arm-kernel
  Cc: Keith Busch, jglisse, Rafael J . Wysocki, linuxarm,
	Andrew Morton, Dan Williams, Jonathan Cameron

The one thing that currently needs doing from an architecture
point of view is associating the GI domain with its nearest
memory domain.  This allows all the standard NUMA aware code
to get a 'reasonable' answer.

A clever driver might elect to do load balancing etc
if there are multiple host / memory domains nearby, but
that's a decision for the driver.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/arm64/kernel/smp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 018a33e01b0e..7c11bc6cccf2 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -711,6 +711,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int err;
 	unsigned int cpu;
+	unsigned int node;
 	unsigned int this_cpu;
 
 	init_cpu_topology();
@@ -749,6 +750,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		set_cpu_present(cpu, true);
 		numa_store_cpu_info(cpu);
 	}
+
+	/*
+	 * Walk the numa domains and set the node to numa memory reference
+	 * for any that are Generic Initiator Only.
+	 */
+	for_each_node_state(node, N_GENERIC_INITIATOR)
+		set_gi_numa_mem(node, local_memory_node(node));
 }
 
 void (*__smp_cross_call)(const struct cpumask *, unsigned int);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 3/4] x86: Support Generic Initiator only proximity domains
  2019-08-21 14:52 [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 1/4] ACPI: Support Generic Initiator only domains Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 2/4] arm64: " Jonathan Cameron
@ 2019-08-21 14:52 ` Jonathan Cameron
  2019-08-21 14:52 ` [PATCH 4/4] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron
  3 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2019-08-21 14:52 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-kernel, linux-arm-kernel
  Cc: Keith Busch, jglisse, Rafael J . Wysocki, linuxarm,
	Andrew Morton, Dan Williams, Jonathan Cameron

Done in a somewhat different fashion to arm64.
Here the infrastructure for memoryless domains was already
in place.  That infrastruture applies just as well to
domains that also don't have a CPU, hence it works for
Generic Initiator Domains.

In common with memoryless domains we only register GI domains
if the proximity node is not online. If a domain is already
a memory containing domain, or a memoryless domain there is
nothing to do just because it also contains a Generic Initiator.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h |  2 ++
 arch/x86/kernel/setup.c     |  1 +
 arch/x86/mm/numa.c          | 14 ++++++++++++++
 3 files changed, 17 insertions(+)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index bbfde3d2662f..f631467272a3 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -62,12 +62,14 @@ extern void numa_clear_node(int cpu);
 extern void __init init_cpu_to_node(void);
 extern void numa_add_cpu(int cpu);
 extern void numa_remove_cpu(int cpu);
+extern void init_gi_nodes(void);
 #else	/* CONFIG_NUMA */
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
 static inline void init_cpu_to_node(void)		{ }
 static inline void numa_add_cpu(int cpu)		{ }
 static inline void numa_remove_cpu(int cpu)		{ }
+static inline void init_gi_nodes(void)			{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bbe35bf879f5..8c368279624d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1265,6 +1265,7 @@ void __init setup_arch(char **cmdline_p)
 	prefill_possible_map();
 
 	init_cpu_to_node();
+	init_gi_nodes();
 
 	io_apic_init_mappings();
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index e6dad600614c..2f561344d590 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -733,6 +733,20 @@ static void __init init_memory_less_node(int nid)
 	 */
 }
 
+/*
+ * Generic Initiator Nodes may have neither CPU nor Memory.
+ * At this stage if either of the others were present we would
+ * already be online.
+ */
+void __init init_gi_nodes(void)
+{
+	int nid;
+
+	for_each_node_state(nid, N_GENERIC_INITIATOR)
+		if (!node_online(nid))
+			init_memory_less_node(nid);
+}
+
 /*
  * Setup early cpu_to_node.
  *
-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 4/4] ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  2019-08-21 14:52 [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains Jonathan Cameron
                   ` (2 preceding siblings ...)
  2019-08-21 14:52 ` [PATCH 3/4] x86: Support Generic Initiator only proximity domains Jonathan Cameron
@ 2019-08-21 14:52 ` Jonathan Cameron
  3 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2019-08-21 14:52 UTC (permalink / raw)
  To: linux-mm, linux-acpi, linux-kernel, linux-arm-kernel
  Cc: Keith Busch, jglisse, Rafael J . Wysocki, linuxarm,
	Andrew Morton, Dan Williams, Jonathan Cameron

Until we tell ACPI that we support generic initiators, it will have
to operate in fall back domain mode and all _PXM entries should
be on existing non GI domains.

This patch sets the relevant OSC bit to make that happen.

Note that this currently doesn't take into account whether we have the relevant
setup code for a given architecture.  Do we want to make this optional, or
should the initial patch set just enable it for all ACPI supporting architectures?

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/acpi/bus.c   | 1 +
 include/linux/acpi.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 48bc96d45bab..9d40e465232f 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -302,6 +302,7 @@ static void acpi_bus_osc_support(void)
 
 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT;
 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT;
+	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT;
 
 #ifdef CONFIG_X86
 	if (boot_cpu_has(X86_FEATURE_HWP)) {
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 9426b9aaed86..cfa3a48f0c81 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -505,6 +505,7 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
 #define OSC_SB_PCLPI_SUPPORT			0x00000080
 #define OSC_SB_OSLPI_SUPPORT			0x00000100
 #define OSC_SB_CPC_DIVERSE_HIGH_SUPPORT		0x00001000
+#define OSC_SB_GENERIC_INITIATOR_SUPPORT	0x00002000
 
 extern bool osc_sb_apei_support_acked;
 extern bool osc_pc_lpi_support_confirmed;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/4] ACPI: Support Generic Initiator only domains
  2019-08-21 14:52 ` [PATCH 1/4] ACPI: Support Generic Initiator only domains Jonathan Cameron
@ 2019-09-02 21:26   ` Rafael J. Wysocki
  2019-09-05  9:16     ` Jonathan Cameron
  0 siblings, 1 reply; 7+ messages in thread
From: Rafael J. Wysocki @ 2019-09-02 21:26 UTC (permalink / raw)
  To: Jonathan Cameron, Dan Williams, Keith Busch
  Cc: Linux Memory Management List, ACPI Devel Maling List,
	Linux Kernel Mailing List, Linux ARM, Jerome Glisse,
	Rafael J . Wysocki, Linuxarm, Andrew Morton

On Wed, Aug 21, 2019 at 4:53 PM Jonathan Cameron
<Jonathan.Cameron@huawei.com> wrote:
>
> Generic Initiators are a new ACPI concept that allows for the
> description of proximity domains that contain a device which
> performs memory access (such as a network card) but neither
> host CPU nor Memory.
>
> This patch has the parsing code and provides the infrastructure
> for an architecture to associate these new domains with their
> nearest memory processing node.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Dan, Keith, any comments?

AFAICS this clashes with the series from Dan that rearranges the ACPI
NUMA related code.

> ---
>  drivers/acpi/numa.c            | 62 +++++++++++++++++++++++++++++++++-
>  drivers/base/node.c            |  3 ++
>  include/asm-generic/topology.h |  3 ++
>  include/linux/nodemask.h       |  1 +
>  include/linux/topology.h       |  7 ++++
>  5 files changed, 75 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
> index eadbf90e65d1..fe34315a9234 100644
> --- a/drivers/acpi/numa.c
> +++ b/drivers/acpi/numa.c
> @@ -170,6 +170,38 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
>                 }
>                 break;
>
> +       case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
> +       {
> +               struct acpi_srat_generic_affinity *p =
> +                       (struct acpi_srat_generic_affinity *)header;
> +               char name[9] = {};
> +
> +               if (p->device_handle_type == 0) {
> +                       /*
> +                        * For pci devices this may be the only place they
> +                        * are assigned a proximity domain
> +                        */
> +                       pr_debug("SRAT Generic Initiator(Seg:%u BDF:%u) in proximity domain %d %s\n",
> +                                *(u16 *)(&p->device_handle[0]),
> +                                *(u16 *)(&p->device_handle[2]),
> +                                p->proximity_domain,
> +                                (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
> +                               "enabled" : "disabled");
> +               } else {
> +                       /*
> +                        * In this case we can rely on the device having a
> +                        * proximity domain reference
> +                        */
> +                       memcpy(name, p->device_handle, 8);
> +                       pr_info("SRAT Generic Initiator(HID=%.8s UID=%.4s) in proximity domain %d %s\n",
> +                               (char *)(&p->device_handle[0]),
> +                               (char *)(&p->device_handle[8]),
> +                               p->proximity_domain,
> +                               (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
> +                               "enabled" : "disabled");
> +               }
> +       }
> +       break;
>         default:
>                 pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",
>                         header->type);
> @@ -378,6 +410,32 @@ acpi_parse_gicc_affinity(union acpi_subtable_headers *header,
>         return 0;
>  }
>
> +static int __init
> +acpi_parse_gi_affinity(union acpi_subtable_headers *header,
> +                      const unsigned long end)
> +{
> +       struct acpi_srat_generic_affinity *gi_affinity;
> +       int node;
> +
> +       gi_affinity = (struct acpi_srat_generic_affinity *)header;
> +       if (!gi_affinity)
> +               return -EINVAL;
> +       acpi_table_print_srat_entry(&header->common);
> +
> +       if (!(gi_affinity->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED))
> +               return -EINVAL;
> +
> +       node = acpi_map_pxm_to_node(gi_affinity->proximity_domain);
> +       if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
> +               pr_err("SRAT: Too many proximity domains.\n");
> +               return -EINVAL;
> +       }
> +       node_set(node, numa_nodes_parsed);
> +       node_set_state(node, N_GENERIC_INITIATOR);
> +
> +       return 0;
> +}
> +
>  static int __initdata parsed_numa_memblks;
>
>  static int __init
> @@ -433,7 +491,7 @@ int __init acpi_numa_init(void)
>
>         /* SRAT: System Resource Affinity Table */
>         if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
> -               struct acpi_subtable_proc srat_proc[3];
> +               struct acpi_subtable_proc srat_proc[4];
>
>                 memset(srat_proc, 0, sizeof(srat_proc));
>                 srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY;
> @@ -442,6 +500,8 @@ int __init acpi_numa_init(void)
>                 srat_proc[1].handler = acpi_parse_x2apic_affinity;
>                 srat_proc[2].id = ACPI_SRAT_TYPE_GICC_AFFINITY;
>                 srat_proc[2].handler = acpi_parse_gicc_affinity;
> +               srat_proc[3].id = ACPI_SRAT_TYPE_GENERIC_AFFINITY;
> +               srat_proc[3].handler = acpi_parse_gi_affinity;
>
>                 acpi_table_parse_entries_array(ACPI_SIG_SRAT,
>                                         sizeof(struct acpi_table_srat),
> diff --git a/drivers/base/node.c b/drivers/base/node.c
> index 75b7e6f6535b..6f60689af5f8 100644
> --- a/drivers/base/node.c
> +++ b/drivers/base/node.c
> @@ -980,6 +980,8 @@ static struct node_attr node_state_attr[] = {
>  #endif
>         [N_MEMORY] = _NODE_ATTR(has_memory, N_MEMORY),
>         [N_CPU] = _NODE_ATTR(has_cpu, N_CPU),
> +       [N_GENERIC_INITIATOR] = _NODE_ATTR(has_generic_initiator,
> +                                          N_GENERIC_INITIATOR),
>  };
>
>  static struct attribute *node_state_attrs[] = {
> @@ -991,6 +993,7 @@ static struct attribute *node_state_attrs[] = {
>  #endif
>         &node_state_attr[N_MEMORY].attr.attr,
>         &node_state_attr[N_CPU].attr.attr,
> +       &node_state_attr[N_GENERIC_INITIATOR].attr.attr,
>         NULL
>  };
>
> diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
> index 238873739550..54d0b4176a45 100644
> --- a/include/asm-generic/topology.h
> +++ b/include/asm-generic/topology.h
> @@ -71,6 +71,9 @@
>  #ifndef set_cpu_numa_mem
>  #define set_cpu_numa_mem(cpu, node)
>  #endif
> +#ifndef set_gi_numa_mem
> +#define set_gi_numa_mem(gi, node)
> +#endif
>
>  #endif /* !CONFIG_NUMA || !CONFIG_HAVE_MEMORYLESS_NODES */
>
> diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
> index 27e7fa36f707..1aebf766fb52 100644
> --- a/include/linux/nodemask.h
> +++ b/include/linux/nodemask.h
> @@ -399,6 +399,7 @@ enum node_states {
>  #endif
>         N_MEMORY,               /* The node has memory(regular, high, movable) */
>         N_CPU,          /* The node has one or more cpus */
> +       N_GENERIC_INITIATOR,    /* The node is a GI only node */
>         NR_NODE_STATES
>  };
>
> diff --git a/include/linux/topology.h b/include/linux/topology.h
> index 47a3e3c08036..2f97754e0508 100644
> --- a/include/linux/topology.h
> +++ b/include/linux/topology.h
> @@ -125,6 +125,13 @@ static inline void set_numa_mem(int node)
>  }
>  #endif
>
> +#ifndef set_gi_numa_mem
> +static inline void set_gi_numa_mem(int gi, int node)
> +{
> +       _node_numa_mem_[gi] = node;
> +}
> +#endif
> +
>  #ifndef node_to_mem_node
>  static inline int node_to_mem_node(int node)
>  {
> --
> 2.20.1
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/4] ACPI: Support Generic Initiator only domains
  2019-09-02 21:26   ` Rafael J. Wysocki
@ 2019-09-05  9:16     ` Jonathan Cameron
  0 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2019-09-05  9:16 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Dan Williams, Keith Busch, Linux Memory Management List,
	ACPI Devel Maling List, Linux Kernel Mailing List, Linux ARM,
	Jerome Glisse, Rafael J . Wysocki, Linuxarm, Andrew Morton

On Mon, 2 Sep 2019 23:26:16 +0200
"Rafael J. Wysocki" <rafael@kernel.org> wrote:

> On Wed, Aug 21, 2019 at 4:53 PM Jonathan Cameron
> <Jonathan.Cameron@huawei.com> wrote:
> >
> > Generic Initiators are a new ACPI concept that allows for the
> > description of proximity domains that contain a device which
> > performs memory access (such as a network card) but neither
> > host CPU nor Memory.
> >
> > This patch has the parsing code and provides the infrastructure
> > for an architecture to associate these new domains with their
> > nearest memory processing node.
> >
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>  
> 
> Dan, Keith, any comments?
> 
> AFAICS this clashes with the series from Dan that rearranges the ACPI
> NUMA related code.

Seems that one is going forwards now which is great. I'll rebase this on
top of Dan's series and send a v5 sometime soon.

Thanks,

Jonathan

> 
> > ---
> >  drivers/acpi/numa.c            | 62 +++++++++++++++++++++++++++++++++-
> >  drivers/base/node.c            |  3 ++
> >  include/asm-generic/topology.h |  3 ++
> >  include/linux/nodemask.h       |  1 +
> >  include/linux/topology.h       |  7 ++++
> >  5 files changed, 75 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
> > index eadbf90e65d1..fe34315a9234 100644
> > --- a/drivers/acpi/numa.c
> > +++ b/drivers/acpi/numa.c
> > @@ -170,6 +170,38 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
> >                 }
> >                 break;
> >
> > +       case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
> > +       {
> > +               struct acpi_srat_generic_affinity *p =
> > +                       (struct acpi_srat_generic_affinity *)header;
> > +               char name[9] = {};
> > +
> > +               if (p->device_handle_type == 0) {
> > +                       /*
> > +                        * For pci devices this may be the only place they
> > +                        * are assigned a proximity domain
> > +                        */
> > +                       pr_debug("SRAT Generic Initiator(Seg:%u BDF:%u) in proximity domain %d %s\n",
> > +                                *(u16 *)(&p->device_handle[0]),
> > +                                *(u16 *)(&p->device_handle[2]),
> > +                                p->proximity_domain,
> > +                                (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
> > +                               "enabled" : "disabled");
> > +               } else {
> > +                       /*
> > +                        * In this case we can rely on the device having a
> > +                        * proximity domain reference
> > +                        */
> > +                       memcpy(name, p->device_handle, 8);
> > +                       pr_info("SRAT Generic Initiator(HID=%.8s UID=%.4s) in proximity domain %d %s\n",
> > +                               (char *)(&p->device_handle[0]),
> > +                               (char *)(&p->device_handle[8]),
> > +                               p->proximity_domain,
> > +                               (p->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED) ?
> > +                               "enabled" : "disabled");
> > +               }
> > +       }
> > +       break;
> >         default:
> >                 pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",
> >                         header->type);
> > @@ -378,6 +410,32 @@ acpi_parse_gicc_affinity(union acpi_subtable_headers *header,
> >         return 0;
> >  }
> >
> > +static int __init
> > +acpi_parse_gi_affinity(union acpi_subtable_headers *header,
> > +                      const unsigned long end)
> > +{
> > +       struct acpi_srat_generic_affinity *gi_affinity;
> > +       int node;
> > +
> > +       gi_affinity = (struct acpi_srat_generic_affinity *)header;
> > +       if (!gi_affinity)
> > +               return -EINVAL;
> > +       acpi_table_print_srat_entry(&header->common);
> > +
> > +       if (!(gi_affinity->flags & ACPI_SRAT_GENERIC_AFFINITY_ENABLED))
> > +               return -EINVAL;
> > +
> > +       node = acpi_map_pxm_to_node(gi_affinity->proximity_domain);
> > +       if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
> > +               pr_err("SRAT: Too many proximity domains.\n");
> > +               return -EINVAL;
> > +       }
> > +       node_set(node, numa_nodes_parsed);
> > +       node_set_state(node, N_GENERIC_INITIATOR);
> > +
> > +       return 0;
> > +}
> > +
> >  static int __initdata parsed_numa_memblks;
> >
> >  static int __init
> > @@ -433,7 +491,7 @@ int __init acpi_numa_init(void)
> >
> >         /* SRAT: System Resource Affinity Table */
> >         if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
> > -               struct acpi_subtable_proc srat_proc[3];
> > +               struct acpi_subtable_proc srat_proc[4];
> >
> >                 memset(srat_proc, 0, sizeof(srat_proc));
> >                 srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY;
> > @@ -442,6 +500,8 @@ int __init acpi_numa_init(void)
> >                 srat_proc[1].handler = acpi_parse_x2apic_affinity;
> >                 srat_proc[2].id = ACPI_SRAT_TYPE_GICC_AFFINITY;
> >                 srat_proc[2].handler = acpi_parse_gicc_affinity;
> > +               srat_proc[3].id = ACPI_SRAT_TYPE_GENERIC_AFFINITY;
> > +               srat_proc[3].handler = acpi_parse_gi_affinity;
> >
> >                 acpi_table_parse_entries_array(ACPI_SIG_SRAT,
> >                                         sizeof(struct acpi_table_srat),
> > diff --git a/drivers/base/node.c b/drivers/base/node.c
> > index 75b7e6f6535b..6f60689af5f8 100644
> > --- a/drivers/base/node.c
> > +++ b/drivers/base/node.c
> > @@ -980,6 +980,8 @@ static struct node_attr node_state_attr[] = {
> >  #endif
> >         [N_MEMORY] = _NODE_ATTR(has_memory, N_MEMORY),
> >         [N_CPU] = _NODE_ATTR(has_cpu, N_CPU),
> > +       [N_GENERIC_INITIATOR] = _NODE_ATTR(has_generic_initiator,
> > +                                          N_GENERIC_INITIATOR),
> >  };
> >
> >  static struct attribute *node_state_attrs[] = {
> > @@ -991,6 +993,7 @@ static struct attribute *node_state_attrs[] = {
> >  #endif
> >         &node_state_attr[N_MEMORY].attr.attr,
> >         &node_state_attr[N_CPU].attr.attr,
> > +       &node_state_attr[N_GENERIC_INITIATOR].attr.attr,
> >         NULL
> >  };
> >
> > diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
> > index 238873739550..54d0b4176a45 100644
> > --- a/include/asm-generic/topology.h
> > +++ b/include/asm-generic/topology.h
> > @@ -71,6 +71,9 @@
> >  #ifndef set_cpu_numa_mem
> >  #define set_cpu_numa_mem(cpu, node)
> >  #endif
> > +#ifndef set_gi_numa_mem
> > +#define set_gi_numa_mem(gi, node)
> > +#endif
> >
> >  #endif /* !CONFIG_NUMA || !CONFIG_HAVE_MEMORYLESS_NODES */
> >
> > diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
> > index 27e7fa36f707..1aebf766fb52 100644
> > --- a/include/linux/nodemask.h
> > +++ b/include/linux/nodemask.h
> > @@ -399,6 +399,7 @@ enum node_states {
> >  #endif
> >         N_MEMORY,               /* The node has memory(regular, high, movable) */
> >         N_CPU,          /* The node has one or more cpus */
> > +       N_GENERIC_INITIATOR,    /* The node is a GI only node */
> >         NR_NODE_STATES
> >  };
> >
> > diff --git a/include/linux/topology.h b/include/linux/topology.h
> > index 47a3e3c08036..2f97754e0508 100644
> > --- a/include/linux/topology.h
> > +++ b/include/linux/topology.h
> > @@ -125,6 +125,13 @@ static inline void set_numa_mem(int node)
> >  }
> >  #endif
> >
> > +#ifndef set_gi_numa_mem
> > +static inline void set_gi_numa_mem(int gi, int node)
> > +{
> > +       _node_numa_mem_[gi] = node;
> > +}
> > +#endif
> > +
> >  #ifndef node_to_mem_node
> >  static inline int node_to_mem_node(int node)
> >  {
> > --
> > 2.20.1
> >  
> 



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-21 14:52 [PATCH 0/4 V4] ACPI: Support generic initiator proximity domains Jonathan Cameron
2019-08-21 14:52 ` [PATCH 1/4] ACPI: Support Generic Initiator only domains Jonathan Cameron
2019-09-02 21:26   ` Rafael J. Wysocki
2019-09-05  9:16     ` Jonathan Cameron
2019-08-21 14:52 ` [PATCH 2/4] arm64: " Jonathan Cameron
2019-08-21 14:52 ` [PATCH 3/4] x86: Support Generic Initiator only proximity domains Jonathan Cameron
2019-08-21 14:52 ` [PATCH 4/4] ACPI: Let ACPI know we support Generic Initiator Affinity Structures Jonathan Cameron

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org linux-acpi@archiver.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/ public-inbox