linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nathan Schulte <nmschulte@gmail.com>
To: Mario Limonciello <mario.limonciello@amd.com>
Cc: linux-acpi@vger.kernel.org, rafael@kernel.org,
	linux-kernel@vger.kernel.org, ofenfisch@googlemail.com,
	wse@tuxedocomputers.com, adam.niederer@gmail.com,
	adrian@freund.io, jirislaby@kernel.org,
	Renjith.Pananchikkal@amd.com, anson.tsao@amd.com,
	Richard.Gong@amd.com, Chuanhong Guo <gch981213@gmail.com>,
	evilsnoo@proton.me, ruinairas1992@gmail.com
Subject: Re: [PATCH v3] ACPI: resource: Remove "Zen" specific match and quirks
Date: Sat, 3 Jun 2023 04:54:00 -0500	[thread overview]
Message-ID: <CAO78Khpii4RxTdEdy22bzGzAwLYje3XnJWXfdHiLud9c1TuzgQ@mail.gmail.com> (raw)
In-Reply-To: <20230601221151.670-1-mario.limonciello@amd.com>

This seems to work as well for the ASUS TUF Gaming A16 Advantage
Edition FA617XT; both Linux 6.3 and 6.4.  Disabling the ITE5570 EC
[I/O] is required for a "truly" functional experience, of course.

On Thu, Jun 1, 2023 at 5:12 PM Mario Limonciello
<mario.limonciello@amd.com> wrote:
>
> commit 9946e39fe8d0 ("ACPI: resource: skip IRQ override on
> AMD Zen platforms") attempted to overhaul the override logic so it
> didn't apply on X86 AMD Zen systems.  This was intentional so that
> systems would prefer DSDT values instead of default MADT value for
> IRQ 1 on Ryzen 6000 systems which typically uses ActiveLow for IRQ1.
>
> This turned out to be a bad assumption because several vendors
> add Interrupt Source Override but don't fix the DSDT. A pile of
> quirks was collecting that proved this wasn't sustaintable.
>
> Furthermore some vendors have used ActiveHigh for IRQ1.
> To solve this problem revert the following commits:
> * commit 17bb7046e7ce ("ACPI: resource: Do IRQ override on all TongFang
> GMxRGxx")
> * commit f3cb9b740869 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
> * commit bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
> * commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15")
> * commit 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen
> platforms")
>
> Cc: ofenfisch@googlemail.com
> Cc: wse@tuxedocomputers.com
> Cc: adam.niederer@gmail.com
> Cc: adrian@freund.io
> Cc: jirislaby@kernel.org
> Cc: Renjith.Pananchikkal@amd.com
> Cc: anson.tsao@amd.com
> Cc: Richard.Gong@amd.com
> Cc: Chuanhong Guo <gch981213@gmail.com>
> Reported-by: evilsnoo@proton.me
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217394
> Reported-by: ruinairas1992@gmail.com
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217406
> Reported-by: nmschulte@gmail.com
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> v2->v3:
>  * Adjust to drop heuristics entirely
>  * Drop tested tags
>  * Add more links and people to Cc
>  * Drop Fixes tag as this got a lot more risky
> v1->v2:
>  * Rebase on 71a485624c4c ("ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P")
>  * Pick up tag
>
> Rafael,
> Please hold off on picking this up until the majority of those on CC
> have tested it on hardware they have and reported results.
>
> Everyone else,
> Please test. If you have problems with this applied, please share
> an acpidump and dmesg either on a bug or to me privately.
> ---
>  drivers/acpi/resource.c | 60 -----------------------------------------
>  1 file changed, 60 deletions(-)
>
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index 0800a9d77558..1dd8d5aebf67 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -470,52 +470,6 @@ static const struct dmi_system_id asus_laptop[] = {
>         { }
>  };
>
> -static const struct dmi_system_id lenovo_laptop[] = {
> -       {
> -               .ident = "LENOVO IdeaPad Flex 5 14ALC7",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "82R9"),
> -               },
> -       },
> -       {
> -               .ident = "LENOVO IdeaPad Flex 5 16ALC7",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "82RA"),
> -               },
> -       },
> -       { }
> -};
> -
> -static const struct dmi_system_id tongfang_gm_rg[] = {
> -       {
> -               .ident = "TongFang GMxRGxx/XMG CORE 15 (M22)/TUXEDO Stellaris 15 Gen4 AMD",
> -               .matches = {
> -                       DMI_MATCH(DMI_BOARD_NAME, "GMxRGxx"),
> -               },
> -       },
> -       { }
> -};
> -
> -static const struct dmi_system_id maingear_laptop[] = {
> -       {
> -               .ident = "MAINGEAR Vector Pro 2 15",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-15A3070T"),
> -               }
> -       },
> -       {
> -               .ident = "MAINGEAR Vector Pro 2 17",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-17A3070T"),
> -               },
> -       },
> -       { }
> -};
> -
>  static const struct dmi_system_id lg_laptop[] = {
>         {
>                 .ident = "LG Electronics 17U70P",
> @@ -539,10 +493,6 @@ struct irq_override_cmp {
>  static const struct irq_override_cmp override_table[] = {
>         { medion_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
>         { asus_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
> -       { lenovo_laptop, 6, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
> -       { lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
> -       { tongfang_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
> -       { maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
>         { lg_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
>  };
>
> @@ -562,16 +512,6 @@ static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,
>                         return entry->override;
>         }
>
> -#ifdef CONFIG_X86
> -       /*
> -        * IRQ override isn't needed on modern AMD Zen systems and
> -        * this override breaks active low IRQs on AMD Ryzen 6000 and
> -        * newer systems. Skip it.
> -        */
> -       if (boot_cpu_has(X86_FEATURE_ZEN))
> -               return false;
> -#endif
> -
>         return true;
>  }
>
> --
> 2.34.1
>

  parent reply	other threads:[~2023-06-03  9:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-01 22:11 [PATCH v3] ACPI: resource: Remove "Zen" specific match and quirks Mario Limonciello
2023-06-02 15:34 ` Werner Sembach
2023-06-03  9:54 ` Nathan Schulte [this message]
2023-06-03 10:19 ` Chuanhong Guo
2023-06-05 14:46   ` Limonciello, Mario
2023-06-05 17:21     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAO78Khpii4RxTdEdy22bzGzAwLYje3XnJWXfdHiLud9c1TuzgQ@mail.gmail.com \
    --to=nmschulte@gmail.com \
    --cc=Renjith.Pananchikkal@amd.com \
    --cc=Richard.Gong@amd.com \
    --cc=adam.niederer@gmail.com \
    --cc=adrian@freund.io \
    --cc=anson.tsao@amd.com \
    --cc=evilsnoo@proton.me \
    --cc=gch981213@gmail.com \
    --cc=jirislaby@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=ofenfisch@googlemail.com \
    --cc=rafael@kernel.org \
    --cc=ruinairas1992@gmail.com \
    --cc=wse@tuxedocomputers.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).