Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Biwen Li <biwen.li@nxp.com>
To: 'Andy Shevchenko' <andy.shevchenko@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>,
	Udit Kumar <udit.kumar@nxp.com>, Wolfram Sang <wsa@the-dreams.de>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Chuanhua Han <chuanhua.han@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-i2c <linux-i2c@vger.kernel.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: RE: [EXT] Re: [v2] ACPI: support for NXP i2c controller
Date: Wed, 11 Sep 2019 06:23:49 +0000
Message-ID: <DB7PR04MB44902F057F8541CF3C7FC3198FB10@DB7PR04MB4490.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <CAHp75Vcz+ruwvq_yu6Oj69XTezsdnne049Ma=oTRPjRXJKnhPQ@mail.gmail.com>

、> 
> Caution: EXT Email
> 
> On Fri, Sep 6, 2019 at 11:03 AM Biwen Li <biwen.li@nxp.com> wrote:
> >
> > From: Chuanhua Han <chuanhua.han@nxp.com>
> >
> > Enable NXP i2c controller to boot with ACPI
> >
> 
> Thanks, the code looks good to me,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
> though...
> 
> > Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> > Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
> > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
> 
> This SoB chain is a bit odd. Who is the author of this? The first SoB in the chain
> usually points to the first (main) author. There is also possible to change that,
> though in that case for the rest we now use Co-developed-by tag rather than
> SoB.
> In any case, if Rafael and Wolfram are okay with this, I have no objections.
Thanks.
> 
> > Signed-off-by: Biwen Li <biwen.li@nxp.com>
> > ---
> > Change in v2:
> >         - Simplify code
> >         - Adjust header file order
> >         - Not use ACPI_PTR()
> >
> >  drivers/acpi/acpi_apd.c      |  7 +++++++
> >  drivers/i2c/busses/i2c-imx.c | 17 +++++++++++++----
> >  2 files changed, 20 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index
> > 7cd0c9ac71ea..71511ae2dfcd 100644
> > --- a/drivers/acpi/acpi_apd.c
> > +++ b/drivers/acpi/acpi_apd.c
> > @@ -160,11 +160,17 @@ static const struct apd_device_desc
> hip08_i2c_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 250000000,
> >  };
> > +
> >  static const struct apd_device_desc thunderx2_i2c_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 125000000,
> >  };
> >
> > +static const struct apd_device_desc nxp_i2c_desc = {
> > +       .setup = acpi_apd_setup,
> > +       .fixed_clk_rate = 350000000,
> > +};
> > +
> >  static const struct apd_device_desc hip08_spi_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 250000000,
> > @@ -238,6 +244,7 @@ static const struct acpi_device_id
> acpi_apd_device_ids[] = {
> >         { "HISI02A1", APD_ADDR(hip07_i2c_desc) },
> >         { "HISI02A2", APD_ADDR(hip08_i2c_desc) },
> >         { "HISI0173", APD_ADDR(hip08_spi_desc) },
> > +       { "NXP0001", APD_ADDR(nxp_i2c_desc) },
> >  #endif
> >         { }
> >  };
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index 15f6cde6452f..a3b61336fe55 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -20,6 +20,7 @@
> >   *
> >   */
> >
> > +#include <linux/acpi.h>
> >  #include <linux/clk.h>
> >  #include <linux/completion.h>
> >  #include <linux/delay.h>
> > @@ -255,6 +256,12 @@ static const struct of_device_id i2c_imx_dt_ids[]
> > = {  };  MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
> >
> > +static const struct acpi_device_id i2c_imx_acpi_ids[] = {
> > +       {"NXP0001", .driver_data = (kernel_ulong_t)&vf610_i2c_hwdata},
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, i2c_imx_acpi_ids);
> > +
> >  static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)  {
> >         return i2c_imx->hwdata->devtype == IMX1_I2C; @@ -1048,14
> > +1055,13 @@ static const struct i2c_algorithm i2c_imx_algo = {
> >
> >  static int i2c_imx_probe(struct platform_device *pdev)  {
> > -       const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
> > -
> &pdev->dev);
> >         struct imx_i2c_struct *i2c_imx;
> >         struct resource *res;
> >         struct imxi2c_platform_data *pdata =
> dev_get_platdata(&pdev->dev);
> >         void __iomem *base;
> >         int irq, ret;
> >         dma_addr_t phy_addr;
> > +       const struct imx_i2c_hwdata *match;
> >
> >         dev_dbg(&pdev->dev, "<%s>\n", __func__);
> >
> > @@ -1075,8 +1081,9 @@ static int i2c_imx_probe(struct platform_device
> *pdev)
> >         if (!i2c_imx)
> >                 return -ENOMEM;
> >
> > -       if (of_id)
> > -               i2c_imx->hwdata = of_id->data;
> > +       match = device_get_match_data(&pdev->dev);
> > +       if (match)
> > +               i2c_imx->hwdata = match;
> >         else
> >                 i2c_imx->hwdata = (struct imx_i2c_hwdata *)
> >
> platform_get_device_id(pdev)->driver_data;
> > @@ -1089,6 +1096,7 @@ static int i2c_imx_probe(struct platform_device
> *pdev)
> >         i2c_imx->adapter.nr             = pdev->id;
> >         i2c_imx->adapter.dev.of_node    = pdev->dev.of_node;
> >         i2c_imx->base                   = base;
> > +       ACPI_COMPANION_SET(&i2c_imx->adapter.dev,
> ACPI_COMPANION(&pdev->dev));
> >
> >         /* Get I2C clock */
> >         i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
> > @@ -1247,6 +1255,7 @@ static struct platform_driver i2c_imx_driver = {
> >                 .name = DRIVER_NAME,
> >                 .pm = &i2c_imx_pm_ops,
> >                 .of_match_table = i2c_imx_dt_ids,
> > +               .acpi_match_table = i2c_imx_acpi_ids,
> >         },
> >         .id_table = imx_i2c_devtype,
> >  };
> > --
> > 2.17.1
> >
> 
> 
> --
> With Best Regards,
> Andy Shevchenko

  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06  7:53 Biwen Li
2019-09-06 10:31 ` Andy Shevchenko
2019-09-11  6:23   ` Biwen Li [this message]
2019-09-06 14:39 ` Oleksij Rempel
2019-09-11  6:25 ` Biwen Li
2019-09-13 14:13 ` Wolfram Sang

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DB7PR04MB44902F057F8541CF3C7FC3198FB10@DB7PR04MB4490.eurprd04.prod.outlook.com \
    --to=biwen.li@nxp.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=chuanhua.han@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=meenakshi.aggarwal@nxp.com \
    --cc=rafael@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=udit.kumar@nxp.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org linux-acpi@archiver.kernel.org
	public-inbox-index linux-acpi


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/ public-inbox