From: Jeremy Linton <firstname.lastname@example.org> To: John Garry <email@example.com>, firstname.lastname@example.org, email@example.com Cc: firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com Subject: Re: [PATCH RFC 0/2] Add basic generic ACPI soc driver Date: Tue, 28 Jan 2020 10:56:18 -0600 [thread overview] Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> Hi, On 1/28/20 5:14 AM, John Garry wrote: > A requirement has come up recently to be able to read system SoC packages > identifiers from userspace . > > For device tree FW-based systems, this would be quite straightforward, in > that we could add a soc driver for that system and use the DT model > identifier as the soc id - that's how most soc drivers seem to do it. > > For ACPI-based systems, the only place I know to get (put) such SoC > information is in the PPTT, specifically the ID Type Structure for a > processor package node. A processor package node describes a physical > boundary of a processor topology. Well presumably that is one of the use cases for DMI, which has fields for the processor/socket as well as the machine vendor. But, quickly looking at the use case, I can't help but think you don't really want any of the above, or the PPTT id. It seems the mapping should actually be tied directly to the uncore PMU definition, rather than a soc/machine/whatever identifier. Which would imply keying off one of the ACPI object identifiers for the PMU itself. > > The ACPI spec does not declare how the fields in this structure must be > used, however it does provide pretty clear examples, which I would expect > most implementers to follow. As such, I try to solve the problem in 2 > parts: > - Add ACPI PPTT API to get opaque package structure > - Add basic ACPI generic soc driver, which can interpret the fields > for known platforms to fill in the ID Type Structure as per example > in the spec. > > So I'm hoping here for some comments on this approach - hence the RFC. > I've cc'ed some folks which may have suggestions. > >  https://firstname.lastname@example.org/ , > https://email@example.com/ > > John Garry (2): > ACPI/PPTT: Add acpi_pptt_get_package_info() API > soc: Add a basic ACPI generic driver > > drivers/acpi/pptt.c | 81 +++++++++++++++++++++++++++++ > drivers/soc/Makefile | 1 + > drivers/soc/acpi_generic.c | 102 +++++++++++++++++++++++++++++++++++++ > include/linux/acpi.h | 13 +++++ > 4 files changed, 197 insertions(+) > create mode 100644 drivers/soc/acpi_generic.c >
next prev parent reply other threads:[~2020-01-28 16:56 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-28 11:14 John Garry 2020-01-28 11:14 ` [PATCH RFC 1/2] ACPI/PPTT: Add acpi_pptt_get_package_info() API John Garry 2020-01-28 12:34 ` Sudeep Holla 2020-01-28 14:04 ` John Garry 2020-01-28 14:54 ` Sudeep Holla 2020-01-29 11:03 ` John Garry 2020-01-30 11:23 ` Sudeep Holla 2020-01-30 16:12 ` John Garry 2020-01-30 17:41 ` Sudeep Holla 2020-01-31 10:58 ` John Garry 2020-01-28 11:14 ` [PATCH RFC 2/2] soc: Add a basic ACPI generic driver John Garry 2020-01-28 11:56 ` Greg KH 2020-01-28 13:33 ` John Garry 2020-01-28 12:50 ` Arnd Bergmann 2020-01-28 14:46 ` John Garry 2020-01-28 15:20 ` Sudeep Holla 2020-01-28 15:59 ` John Garry 2020-01-28 16:17 ` Sudeep Holla 2020-01-28 17:51 ` Olof Johansson 2020-01-28 18:22 ` John Garry 2020-01-28 19:11 ` Rafael J. Wysocki 2020-01-28 19:28 ` John Garry 2020-01-28 22:30 ` Rafael J. Wysocki 2020-01-29 10:27 ` John Garry 2020-01-28 20:06 ` Olof Johansson 2020-01-29 9:58 ` John Garry 2020-01-28 16:56 ` Jeremy Linton [this message] 2020-01-28 17:28 ` [PATCH RFC 0/2] Add basic generic ACPI soc driver John Garry 2020-01-28 19:04 ` Jeremy Linton 2020-01-28 20:07 ` John Garry
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: [PATCH RFC 0/2] Add basic generic ACPI soc driver' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).