Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
To: Auger Eric <eric.auger@redhat.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>,
	"devel@acpica.org" <devel@acpica.org>
Cc: Linuxarm <linuxarm@huawei.com>,
	"steven.price@arm.com" <steven.price@arm.com>,
	"Guohanjun (Hanjun Guo)" <guohanjun@huawei.com>,
	"Sami.Mujawar@arm.com" <Sami.Mujawar@arm.com>,
	"robin.murphy@arm.com" <robin.murphy@arm.com>,
	wanghuiqiang <wanghuiqiang@huawei.com>,
	Jean-Philippe Brucker <jean-philippe@linaro.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: RE: [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node
Date: Thu, 15 Apr 2021 10:37:02 +0000
Message-ID: <f061e603b440466db26be9baf334f2b0@huawei.com> (raw)
In-Reply-To: <2e58d4e6-83fd-b5cf-b2db-7575cb197058@redhat.com>

[+Lorenzo]

> -----Original Message-----
> From: Auger Eric [mailto:eric.auger@redhat.com]
> Sent: 15 April 2021 10:49
> To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>;
> linux-arm-kernel@lists.infradead.org; linux-acpi@vger.kernel.org;
> iommu@lists.linux-foundation.org; devel@acpica.org
> Cc: Linuxarm <linuxarm@huawei.com>; steven.price@arm.com; Guohanjun
> (Hanjun Guo) <guohanjun@huawei.com>; Sami.Mujawar@arm.com;
> robin.murphy@arm.com; wanghuiqiang <wanghuiqiang@huawei.com>;
> Jean-Philippe Brucker <jean-philippe@linaro.org>
> Subject: Re: [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node
> 
> Hi Shameer,
> 
> + Jean-Philippe
> 
> 
> On 11/19/20 1:11 PM, Shameer Kolothum wrote:
> > RFC v1 --> v2:
> >  - Added a generic interface for IOMMU drivers to retrieve all the
> >    RMR info associated with a given IOMMU.
> >  - SMMUv3 driver gets the RMR list during probe() and installs
> >    bypass STEs for all the SIDs in the RMR list. This is to keep
> >    the ongoing traffic alive(if any) during SMMUv3 reset. This is
> >    based on the suggestions received for v1 to take care of the
> >    EFI framebuffer use case. Only sanity tested for now.
> >  - During the probe/attach device, SMMUv3 driver reserves any
> >    RMR region associated with the device such that there is a unity
> >    mapping for them in SMMU.
> > ---
> >
> > The series adds support to IORT RMR nodes specified in IORT
> > Revision E -ARM DEN 0049E[0]. RMR nodes are used to describe memory
> > ranges that are used by endpoints and require a unity mapping
> > in SMMU.
> >
> > We have faced issues with 3408iMR RAID controller cards which
> > fail to boot when SMMU is enabled. This is because these controllers
> > make use of host memory for various caching related purposes and when
> > SMMU is enabled the iMR firmware fails to access these memory regions
> > as there is no mapping for them. IORT RMR provides a way for UEFI to
> > describe and report these memory regions so that the kernel can make
> > a unity mapping for these in SMMU.
> >
> > RFC because, Patch #1 is to update the actbl2.h and should be done
> > through acpica update. I have send out a pull request[1] for that.
> >
> > Tests:
> >
> > With a UEFI, that reports the RMR for the dev,
> > ....
> > [16F0h 5872   1]                         Type : 06
> > [16F1h 5873   2]                       Length : 007C
> > [16F3h 5875   1]                     Revision : 00
> > [1038h 0056   2]                     Reserved : 00000000
> > [1038h 0056   2]                   Identifier : 00000000
> > [16F8h 5880   4]                Mapping Count : 00000001
> > [16FCh 5884   4]               Mapping Offset : 00000040
> >
> > [1700h 5888   4]    Number of RMR Descriptors : 00000002
> > [1704h 5892   4]        RMR Descriptor Offset : 00000018
> >
> > [1708h 5896   8]          Base Address of RMR : 0000E6400000
> > [1710h 5904   8]                Length of RMR : 000000100000
> > [1718h 5912   4]                     Reserved : 00000000
> >
> > [171Ch 5916   8]          Base Address of RMR : 0000000027B00000
> > [1724h 5924   8]                Length of RMR : 0000000000C00000
> > [172Ch 5932   4]                     Reserved : 00000000
> >
> > [1730h 5936   4]                   Input base : 00000000
> > [1734h 5940   4]                     ID Count : 00000001
> > [1738h 5944   4]                  Output Base : 00000003
> > [173Ch 5948   4]             Output Reference : 00000064
> > [1740h 5952   4]        Flags (decoded below) : 00000001
> >                                Single Mapping : 1
> 
> Following Jean-Philippe's suggestion I have used your series for nested
> stage SMMUv3 integration, ie. to simplify the MSI nested stage mapping.
> 
> Host allocates hIOVA -> physical doorbell (pDB) as it normally does for
> VFIO device passthrough. IOVA Range is 0x8000000 - 0x8100000.
> 
> I expose this MIS IOVA range to the guest as an RMR and as a result
> guest has a flat mapping for this range. As the physical device is
> programmed with hIOVA we have the following mapping:
> 
> IOVA            IPA          PA
> hIOVA   ->     hIOVA     ->  pDB
>         S1               s2
> 
> This works.
> 
> The only weird thing is that I need to expose 256 RMRs due to the
> 'Single Mapping' mandatory flag. I need to have 1 RMR per potential SID
> on the bus.

Please see the discussion here,
https://op-lists.linaro.org/pipermail/linaro-open-discussions/2021-April/000150.html

Hi Lorenzo,

May be this is a use case for relaxing that single mapping requirement.

Thanks,
Shameer

> 
> I will post a new version of SMMUv3 nested stage soon for people to test
> & compare. Obviously this removes a bunch of code on both SMMU/VFIO and
> QEMU code so I think this solution looks better overall.
> 
> Thanks
> 
> Eric
> > ...
> >
> > Without the series the RAID controller initialization fails as
> > below,
> >
> > ...
> > [   12.631117] megaraid_sas 0000:03:00.0: FW supports sync
> cache        : Yes
> > [   12.637360] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is
> called outbound_intr_mask:0x40000009
> > [   18.776377] megaraid_sas 0000:03:00.0: Init cmd return status FAILED
> for SCSI host 0
> > [   23.019383] megaraid_sas 0000:03:00.0: Waiting for FW to come to
> ready state
> > [  106.684281] megaraid_sas 0000:03:00.0: FW in FAULT state, Fault
> code:0x10000 subcode:0x0 func:megasas_transition_to_ready
> > [  106.695186] megaraid_sas 0000:03:00.0: System Register set:
> > [  106.889787] megaraid_sas 0000:03:00.0: Failed to transition controller to
> ready for scsi0.
> > [  106.910475] megaraid_sas 0000:03:00.0: Failed from megasas_init_fw
> 6407
> > estuary:/$
> >
> > With the series, now the kernel has direct mapping for the dev as
> > below,
> >
> > estuary:/$ cat /sys/kernel/iommu_groups/0/reserved_regions
> > 0x0000000008000000 0x00000000080fffff msi
> > 0x0000000027b00000 0x00000000286fffff direct
> > 0x00000000e6400000 0x00000000e64fffff direct
> > estuary:/$
> >
> > ....
> > [   12.254318] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is
> called outbound_intr_mask:0x40000009
> > [   12.739089] megaraid_sas 0000:03:00.0: FW provided supportMaxExtLDs:
> 0      max_lds: 32
> > [   12.746628] megaraid_sas 0000:03:00.0: controller type       :
> iMR(0MB)
> > [   12.752694] megaraid_sas 0000:03:00.0: Online Controller Reset(OCR)  :
> Enabled
> > [   12.759798] megaraid_sas 0000:03:00.0: Secure JBOD support   : Yes
> > [   12.765778] megaraid_sas 0000:03:00.0: NVMe passthru support : Yes
> > [   12.771931] megaraid_sas 0000:03:00.0: FW provided TM
> TaskAbort/Reset timeou: 6 secs/60 secs
> > [   12.780503] megaraid_sas 0000:03:00.0: JBOD sequence map
> support     : Yes
> > [   12.787000] megaraid_sas 0000:03:00.0: PCI Lane Margining
> support    : No
> > [   12.819179] megaraid_sas 0000:03:00.0: NVME page size        :
> (4096)
> > [   12.825672] megaraid_sas 0000:03:00.0: megasas_enable_intr_fusion is
> called outbound_intr_mask:0x40000000
> > [   12.835199] megaraid_sas 0000:03:00.0: INIT adapter done
> > [   12.873932] megaraid_sas 0000:03:00.0: pci id                :
> (0x1000)/(0x0017)/(0x19e5)/(0xd213)
> > [   12.881644] megaraid_sas 0000:03:00.0: unevenspan support    : no
> > [   12.887451] megaraid_sas 0000:03:00.0: firmware crash dump   : no
> > [   12.893344] megaraid_sas 0000:03:00.0: JBOD sequence map     :
> enabled
> >
> > RAID controller init is now success and can detect the drives
> > attached as well.
> >
> > Thanks,
> > Shameer
> >
> > [0]. https://developer.arm.com/documentation/den0049/latest/
> > [1]. https://github.com/acpica/acpica/pull/638
> >
> > Shameer Kolothum (8):
> >   ACPICA: IORT: Update for revision E
> >   ACPI/IORT: Add support for RMR node parsing
> >   iommu/dma: Introduce generic helper to retrieve RMR info
> >   ACPI/IORT: Add RMR memory regions reservation helper
> >   iommu/arm-smmu-v3: Introduce strtab init helper
> >   iommu/arm-smmu-v3: Add bypass flag to arm_smmu_write_strtab_ent()
> >   iommu/arm-smmu-v3: Get associated RMR info and install bypass STE
> >   iommu/arm-smmu-v3: Reserve any RMR regions associated with a dev
> >
> >  drivers/acpi/arm64/iort.c                   | 182
> +++++++++++++++++++-
> >  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 112 ++++++++++--
> >  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h |   2 +
> >  drivers/iommu/dma-iommu.c                   |  39 +++++
> >  include/acpi/actbl2.h                       |  25 ++-
> >  include/linux/acpi_iort.h                   |   6 +
> >  include/linux/dma-iommu.h                   |   7 +
> >  include/linux/iommu.h                       |  16 ++
> >  8 files changed, 367 insertions(+), 22 deletions(-)
> >


      reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 12:11 Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 1/8] ACPICA: IORT: Update for revision E Shameer Kolothum
2021-03-22 10:36   ` Shameerali Kolothum Thodi
2021-03-22 21:57     ` Kaneda, Erik
2021-03-23 15:53       ` Lorenzo Pieralisi
2021-03-23 18:51         ` Kaneda, Erik
2021-03-24  9:50           ` Lorenzo Pieralisi
2021-03-25  8:40     ` Jon Nettleton
2021-03-25 15:54       ` Shameerali Kolothum Thodi
2021-04-15  7:27   ` Auger Eric
2020-11-19 12:11 ` [RFC PATCH v2 2/8] ACPI/IORT: Add support for RMR node parsing Shameer Kolothum
2021-04-15  9:39   ` Auger Eric
2021-04-15 10:30     ` Shameerali Kolothum Thodi
2020-11-19 12:11 ` [RFC PATCH v2 3/8] iommu/dma: Introduce generic helper to retrieve RMR info Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 4/8] ACPI/IORT: Add RMR memory regions reservation helper Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 5/8] iommu/arm-smmu-v3: Introduce strtab init helper Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 6/8] iommu/arm-smmu-v3: Add bypass flag to arm_smmu_write_strtab_ent() Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 7/8] iommu/arm-smmu-v3: Get associated RMR info and install bypass STE Shameer Kolothum
2020-11-19 12:11 ` [RFC PATCH v2 8/8] iommu/arm-smmu-v3: Reserve any RMR regions associated with a dev Shameer Kolothum
2020-12-10 10:25 ` [RFC PATCH v2 0/8] ACPI/IORT: Support for IORT RMR node Steven Price
2020-12-14 10:55   ` Shameerali Kolothum Thodi
2020-12-14 12:33     ` Robin Murphy
2020-12-14 13:42       ` Steven Price
2020-12-14 14:47         ` Shameerali Kolothum Thodi
2020-12-17 14:47           ` Jon Nettleton
2020-12-17 15:42             ` Shameerali Kolothum Thodi
2020-12-17 15:53               ` Jon Nettleton
2020-12-18 10:53                 ` Jon Nettleton
2021-01-04  8:55                   ` Shameerali Kolothum Thodi
2021-01-04 10:55                     ` Jon Nettleton
2021-04-09  9:50 ` Auger Eric
2021-04-09 10:08   ` Shameerali Kolothum Thodi
2021-04-15  9:48 ` Auger Eric
2021-04-15 10:37   ` Shameerali Kolothum Thodi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f061e603b440466db26be9baf334f2b0@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=Sami.Mujawar@arm.com \
    --cc=devel@acpica.org \
    --cc=eric.auger@redhat.com \
    --cc=guohanjun@huawei.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linuxarm@huawei.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=steven.price@arm.com \
    --cc=wanghuiqiang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git