From: Jianxin Pan <jianxin.pan@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
Hanjie Lin <hanjie.lin@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Yixun Lan <yixun.lan@amlogic.com>,
linux-kernel@vger.kernel.org,
Boris Brezillon <boris.brezillon@bootlin.com>,
Liang Yang <liang.yang@amlogic.com>,
Jian Hu <jian.hu@amlogic.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Qiufang Dai <qiufang.dai@amlogic.com>
Subject: [PATCH v8 4/4] clk: meson: add sub MMC clock controller driver
Date: Tue, 18 Dec 2018 00:24:10 +0800 [thread overview]
Message-ID: <1545063850-21504-5-git-send-email-jianxin.pan@amlogic.com> (raw)
In-Reply-To: <1545063850-21504-1-git-send-email-jianxin.pan@amlogic.com>
From: Yixun Lan <yixun.lan@amlogic.com>
The patch will add a MMC clock controller driver which used by MMC or NAND,
It provide a mux and divider clock, and three phase clocks - core, tx, tx.
Two clocks are provided as the parent of MMC clock controller from
upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.
To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header
can be used in the device tree sources.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
drivers/clk/meson/Kconfig | 9 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/mmc-clkc.c | 304 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 314 insertions(+)
create mode 100644 drivers/clk/meson/mmc-clkc.c
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..c84b0f7 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -15,6 +15,15 @@ config COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select RESET_CONTROLLER
+config COMMON_CLK_MMC_MESON
+ tristate "Meson MMC Sub Clock Controller Driver"
+ select MFD_SYSCON
+ select COMMON_CLK_AMLOGIC
+ help
+ Support for the MMC sub clock controller on Amlogic Meson Platform,
+ which include S905 (GXBB, GXL), A113D/X (AXG) devices.
+ Say Y if you want this clock enabled.
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index d59620d..54416a2 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,4 +12,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
new file mode 100644
index 0000000..2582a98
--- /dev/null
+++ b/drivers/clk/meson/mmc-clkc.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/amlogic,mmc-clkc.h>
+
+#include "clkc.h"
+
+/* clock ID used by internal driver */
+
+#define SD_EMMC_CLOCK 0
+#define CLK_DELAY_STEP_PS 200
+#define MUX_CLK_NUM_PARENTS 2
+#define MMC_MAX_CLKS 4
+
+struct mmc_clkc_data {
+ struct meson_clk_phase_delay_data tx;
+ struct meson_clk_phase_delay_data rx;
+};
+
+static struct clk_regmap_mux_data mmc_clkc_mux_data = {
+ .offset = SD_EMMC_CLOCK,
+ .mask = 0x3,
+ .shift = 6,
+};
+
+static const struct meson_sclk_div_data mmc_clkc_div_data = {
+ .div = {
+ .reg_off = SD_EMMC_CLOCK,
+ .width = 6,
+ },
+ .flags = CLK_DIVIDER_ONE_BASED,
+};
+
+static struct meson_clk_phase_data mmc_clkc_core_phase = {
+ .ph = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 8,
+ .width = 2,
+ }
+};
+
+static const struct mmc_clkc_data mmc_clkc_gx_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 20,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+};
+
+static const struct mmc_clkc_data mmc_clkc_axg_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 22,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+};
+
+static const struct of_device_id mmc_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,gx-mmc-clkc",
+ .data = &mmc_clkc_gx_data
+ },
+ {
+ .compatible = "amlogic,axg-mmc-clkc",
+ .data = &mmc_clkc_axg_data
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
+
+static struct clk_regmap *
+mmc_clkc_register_clk(struct device *dev, struct regmap *map,
+ struct clk_init_data *init,
+ const char *suffix, void *data)
+{
+ struct clk_regmap *clk;
+ char *name;
+ int ret;
+
+ clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
+
+ name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ init->name = name;
+ clk->map = map;
+ clk->data = data;
+ clk->hw.init = init;
+ ret = devm_clk_hw_register(dev, &clk->hw);
+ if (ret)
+ clk = ERR_PTR(ret);
+
+ kfree(name);
+ return clk;
+}
+
+static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
+ struct regmap *map)
+{
+ const char *parent_names[MUX_CLK_NUM_PARENTS];
+ struct clk_init_data init;
+ struct clk_regmap *mux;
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ char name[8];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
+ dev_err(dev, "Missing clock %s\n", name);
+ return ERR_CAST(clk);
+ }
+
+ parent_names[i] = __clk_get_name(clk);
+ }
+
+ init.ops = &clk_regmap_mux_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
+ if (IS_ERR(mux))
+ dev_err(dev, "Mux clock registration failed\n");
+
+ return mux;
+}
+
+static struct clk_regmap *
+mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map,
+ char *suffix, const struct clk_hw *hw,
+ unsigned long flags,
+ const struct clk_ops *ops, void *data)
+{
+ struct clk_init_data init;
+ struct clk_regmap *clk;
+ const char *parent_name = clk_hw_get_name(hw);
+
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
+ if (IS_ERR(clk))
+ dev_err(dev, "%s clock registration failed\n", suffix);
+
+ return clk;
+}
+
+static int mmc_clkc_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *onecell_data;
+ struct device *dev = &pdev->dev;
+ struct mmc_clkc_data *data;
+ struct regmap *map;
+ struct clk_regmap *clk, *core;
+ struct meson_sclk_div_data *div_data;
+
+ /*cast to drop the const in match->data*/
+ data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ map = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "could not find mmc clock controller\n");
+ return PTR_ERR(map);
+ }
+
+ onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
+ sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
+ GFP_KERNEL);
+ if (!onecell_data)
+ return -ENOMEM;
+
+ clk = mmc_clkc_register_mux(dev, map);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL);
+ if (!div_data)
+ return -ENOMEM;
+
+ memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data));
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "div",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_sclk_div_ops,
+ div_data);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_DIV] = &clk->hw,
+
+ core = mmc_clkc_register_clk_with_parent(dev, map, "core",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_clk_phase_ops,
+ &mmc_clkc_core_phase);
+ if (IS_ERR(core))
+ return PTR_ERR(core);
+
+ onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw,
+
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "rx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ &data->rx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw,
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "tx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ &data->tx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw,
+ onecell_data->num = MMC_MAX_CLKS;
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ onecell_data);
+}
+
+static struct platform_driver mmc_clkc_driver = {
+ .probe = mmc_clkc_probe,
+ .driver = {
+ .name = "meson-mmc-clkc",
+ .of_match_table = of_match_ptr(mmc_clkc_match_table),
+ },
+};
+
+module_platform_driver(mmc_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic AXG MMC clock driver");
+MODULE_AUTHOR("Jianxin Pan <jianxin.pan@amlogic.com>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2018-12-17 16:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 16:24 [PATCH v8 0/4] clk: meson: add a sub EMMC clock controller support Jianxin Pan
2018-12-17 16:24 ` [PATCH v8 1/4] clk: meson: add one based divider support for sclk divider Jianxin Pan
2018-12-17 16:24 ` [PATCH v8 2/4] clk: meson: add emmc sub clock phase delay driver Jianxin Pan
2018-12-17 16:24 ` [PATCH v8 3/4] clk: meson: add DT documentation for emmc clock controller Jianxin Pan
2018-12-17 16:24 ` Jianxin Pan [this message]
2018-12-17 20:33 ` [PATCH v8 4/4] clk: meson: add sub MMC clock controller driver kbuild test robot
2019-01-09 20:48 ` Stephen Boyd
2019-01-15 16:29 ` Jianxin Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1545063850-21504-5-git-send-email-jianxin.pan@amlogic.com \
--to=jianxin.pan@amlogic.com \
--cc=boris.brezillon@bootlin.com \
--cc=carlo@caione.org \
--cc=hanjie.lin@amlogic.com \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic.com \
--cc=khilman@baylibre.com \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=victor.wan@amlogic.com \
--cc=yixun.lan@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).