Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Loys Ollivier <lollivier@baylibre.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>, Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
	Loys Ollivier <lollivier@baylibre.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] tty: serial: meson: if no alias specified use an available id
Date: Mon, 14 Jan 2019 17:54:26 +0100
Message-ID: <1547484866-3600-1-git-send-email-lollivier@baylibre.com> (raw)

At probe, the uart driver tries to get an id from a device tree alias.
When no alias was specified, the driver would return an error and probing
would fail.

Providing an alias for registering a serial device should not be mandatory.
If the device tree does not specify an alias, provide an id from a reserved
range so that the probing can continue.

Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
 drivers/tty/serial/meson_uart.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 8a842591b37c..fbc5bc022a39 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -72,7 +72,8 @@
 #define AML_UART_BAUD_USE		BIT(23)
 #define AML_UART_BAUD_XTAL		BIT(24)
 
-#define AML_UART_PORT_NUM		6
+#define AML_UART_PORT_NUM		12
+#define AML_UART_PORT_OFFSET		6
 #define AML_UART_DEV_NAME		"ttyAML"
 
 
@@ -654,10 +655,20 @@ static int meson_uart_probe(struct platform_device *pdev)
 	struct resource *res_mem, *res_irq;
 	struct uart_port *port;
 	int ret = 0;
+	int id = -1;
 
 	if (pdev->dev.of_node)
 		pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
 
+	if (pdev->id < 0) {
+		for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) {
+			if (!meson_ports[id]) {
+				pdev->id = id;
+				break;
+			}
+		}
+	}
+
 	if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
 		return -EINVAL;
 
-- 
2.7.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-14 16:54 Loys Ollivier [this message]
2019-01-15  9:35 ` Neil Armstrong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547484866-3600-1-git-send-email-lollivier@baylibre.com \
    --to=lollivier@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git