* [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for the WeTek Core 2
2020-07-19 2:14 [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2 Christian Hewitt
@ 2020-07-19 2:14 ` Christian Hewitt
2020-07-19 2:14 ` [PATCH v3 2/2] arm64: dts: meson: " Christian Hewitt
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Christian Hewitt @ 2020-07-19 2:14 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
The WeTek Core 2 is a commercial Android device based on the Amlogic Q200
reference design using the S912-H chipset. Specs:
3GB DDR3 RAM
32GB eMMC storage
10/100 Ethernet using Realtek RTL8152 (internal USB)
802.11 a/b/g/n/ac + BT 4.1 sdio wireless module (AP6356S)
2x single colour LEDs to indicate power
1x power button
1x reset button on the underside of the box
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack
S/PDIF audio output
2x USB 2.0 ports
1x USB OTG port (internal)
1x micro SD card slot
UART pins (internal)
IR Sensor
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 378229fa8310..5eba9f48823e 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -121,6 +121,7 @@ properties:
- libretech,aml-s912-pc
- nexbox,a1
- tronsmart,vega-s96
+ - wetek,core2
- const: amlogic,s912
- const: amlogic,meson-gxm
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/2] arm64: dts: meson: add support for the WeTek Core 2
2020-07-19 2:14 [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2 Christian Hewitt
2020-07-19 2:14 ` [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for the " Christian Hewitt
@ 2020-07-19 2:14 ` Christian Hewitt
2020-07-21 8:05 ` Neil Armstrong
2020-07-21 21:14 ` [PATCH v3 0/2] arm64: dts: meson: add support for " Kevin Hilman
2020-07-21 21:21 ` patchwork-bot+linux-amlogic
3 siblings, 1 reply; 6+ messages in thread
From: Christian Hewitt @ 2020-07-19 2:14 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
The WeTek Core2 is a commercial device based on the Amlogic Q200 reference
design but with the following differences:
- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
- uart_AO can be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxm-wetek-core2.dts | 87 +++++++++++++++++++
2 files changed, 88 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5cac4d1d487d..4e2239ffcaa5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
new file mode 100644
index 000000000000..ec794c134c15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+ model = "WeTek Core 2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-update {
+ label = "update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button-power {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+ðmac {
+ status = "disabled";
+};
+
+&internal_phy {
+ status = "disabled";
+};
+
+&ir {
+ linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v3 2/2] arm64: dts: meson: add support for the WeTek Core 2
2020-07-19 2:14 ` [PATCH v3 2/2] arm64: dts: meson: " Christian Hewitt
@ 2020-07-21 8:05 ` Neil Armstrong
0 siblings, 0 replies; 6+ messages in thread
From: Neil Armstrong @ 2020-07-21 8:05 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 19/07/2020 04:14, Christian Hewitt wrote:
> The WeTek Core2 is a commercial device based on the Amlogic Q200 reference
> design but with the following differences:
>
> - 3GB RAM, 32GB eMMC
> - Blue and Red LEDs used to signal on/off status
> - uart_AO can be accessed after opening the case; soldering required
> - USB OTG is not accessible (inside the case)
> - Realtek RTL8152 Ethernet (internal USB connection)
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-gxm-wetek-core2.dts | 87 +++++++++++++++++++
> 2 files changed, 88 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 5cac4d1d487d..4e2239ffcaa5 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
> new file mode 100644
> index 000000000000..ec794c134c15
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
> @@ -0,0 +1,87 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
> + model = "WeTek Core 2";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + blue {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1710000>;
> +
> + button-update {
> + label = "update";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <10000>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <100>;
> +
> + button-power {
> + label = "power";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +/* Disabled as Realtek RTL8152 USB provides Ethernet */
> +ðmac {
> + status = "disabled";
> +};
> +
> +&internal_phy {
> + status = "disabled";
> +};
> +
> +&ir {
> + linux,rc-map-name = "rc-wetek-play2";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + max-speed = <2000000>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> + };
> +};
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2
2020-07-19 2:14 [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2 Christian Hewitt
2020-07-19 2:14 ` [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for the " Christian Hewitt
2020-07-19 2:14 ` [PATCH v3 2/2] arm64: dts: meson: " Christian Hewitt
@ 2020-07-21 21:14 ` Kevin Hilman
2020-07-21 21:21 ` patchwork-bot+linux-amlogic
3 siblings, 0 replies; 6+ messages in thread
From: Kevin Hilman @ 2020-07-21 21:14 UTC (permalink / raw)
To: linux-amlogic, linux-kernel, Christian Hewitt, Mark Rutland,
devicetree, Rob Herring, linux-arm-kernel
On Sun, 19 Jul 2020 02:14:19 +0000, Christian Hewitt wrote:
> This series adds support for the WeTek Core 2 which is a commercial box
> device based on the Amlogic Q200 reference design.
>
> v3 changes - fix BT node (enable-gpios > shutdown-gpios)
> v2 changes - simplify ethernet disable
>
> Christian Hewitt (2):
> dt-bindings: arm: amlogic: add support for the WeTek Core 2
> arm64: dts: meson: add support for the WeTek Core 2
>
> [...]
Applied, thanks!
[1/2] dt-bindings: arm: amlogic: add support for the WeTek Core 2
commit: 8b6f53d7b94b8d23860ae44a56b0af404a6c7e4c
[2/2] arm64: dts: meson: add support for the WeTek Core 2
commit: ea232b9ccccf2f55fe231441f3908c31c7136c4f
Best regards,
--
Kevin Hilman <khilman@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2
2020-07-19 2:14 [PATCH v3 0/2] arm64: dts: meson: add support for WeTek Core 2 Christian Hewitt
` (2 preceding siblings ...)
2020-07-21 21:14 ` [PATCH v3 0/2] arm64: dts: meson: add support for " Kevin Hilman
@ 2020-07-21 21:21 ` patchwork-bot+linux-amlogic
3 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+linux-amlogic @ 2020-07-21 21:21 UTC (permalink / raw)
To: Christian Hewitt; +Cc: linux-amlogic, khilman
Hello:
This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).
On Sun, 19 Jul 2020 02:14:19 +0000 you wrote:
> From: chewitt <christianshewitt@gmail.com>
>
> This series adds support for the WeTek Core 2 which is a commercial box
> device based on the Amlogic Q200 reference design.
>
> v3 changes - fix BT node (enable-gpios > shutdown-gpios)
> v2 changes - simplify ethernet disable
>
> [...]
Here is a summary with links:
- [v3,1/2] dt-bindings: arm: amlogic: add support for the WeTek Core 2
https://git.kernel.org/khilman/linux-amlogic/c/8b6f53d7b94b8d23860ae44a56b0af404a6c7e4c
- [v3,2/2] arm64: dts: meson: add support for the WeTek Core 2
https://git.kernel.org/khilman/linux-amlogic/c/ea232b9ccccf2f55fe231441f3908c31c7136c4f
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread