Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H
@ 2021-02-01 21:05 Christian Hewitt
  2021-02-01 21:05 ` [PATCH 2/2] arm64: dts: meson: add initial device-tree for " Christian Hewitt
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Christian Hewitt @ 2021-02-01 21:05 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

The Minix NEO U9-H is a small form-factor Android STB based on the
Amlogic Q200 reference board with an S912-H chip.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 6bef60ddda64..dccfc048fb1c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -120,6 +120,7 @@ properties:
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
+              - minix,neo-u9h
               - nexbox,a1
               - tronsmart,vega-s96
               - wetek,core2
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/2] arm64: dts: meson: add initial device-tree for Minix NEO U9-H
  2021-02-01 21:05 [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H Christian Hewitt
@ 2021-02-01 21:05 ` Christian Hewitt
  2021-02-10  8:11   ` Neil Armstrong
  2021-02-09 20:57 ` [PATCH 1/2] dt-bindings: arm: amlogic: add support for the " Rob Herring
  2021-03-08 17:39 ` Kevin Hilman
  2 siblings, 1 reply; 5+ messages in thread
From: Christian Hewitt @ 2021-02-01 21:05 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

Minix NEO U9-H is based on the Amlogic Q200 reference board with an
S912-H chip and the following specs:

- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- RTC chip
- HDMI 2.1 video
- S/PDIF optical output
- ES8323 audio codec
- Analogue headphone output
- 3x USB 2.0 ports (1x OTG)
- IR receiver
- 1x Power LED (white)
- 1x Power button (rear)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Tested-by: Wes Bradley <komplex@live.ie>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-gxm-minix-neo-u9h.dts   | 120 ++++++++++++++++++
 2 files changed, 121 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index dce41cd3f347..46e67de3d6d2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
new file mode 100644
index 000000000000..a414cd39c2b1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Minix Neo U9-H";
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-minix-neo";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		wakeup-source;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H
  2021-02-01 21:05 [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H Christian Hewitt
  2021-02-01 21:05 ` [PATCH 2/2] arm64: dts: meson: add initial device-tree for " Christian Hewitt
@ 2021-02-09 20:57 ` Rob Herring
  2021-03-08 17:39 ` Kevin Hilman
  2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2021-02-09 20:57 UTC (permalink / raw)
  To: Christian Hewitt
  Cc: Mark Rutland, devicetree, Kevin Hilman, linux-kernel,
	Rob Herring, linux-amlogic, linux-arm-kernel

On Mon, 01 Feb 2021 21:05:07 +0000, Christian Hewitt wrote:
> The Minix NEO U9-H is a small form-factor Android STB based on the
> Amlogic Q200 reference board with an S912-H chip.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 2/2] arm64: dts: meson: add initial device-tree for Minix NEO U9-H
  2021-02-01 21:05 ` [PATCH 2/2] arm64: dts: meson: add initial device-tree for " Christian Hewitt
@ 2021-02-10  8:11   ` Neil Armstrong
  0 siblings, 0 replies; 5+ messages in thread
From: Neil Armstrong @ 2021-02-10  8:11 UTC (permalink / raw)
  To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
	devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

On 01/02/2021 22:05, Christian Hewitt wrote:
> Minix NEO U9-H is based on the Amlogic Q200 reference board with an
> S912-H chip and the following specs:
> 
> - 2GB DDR3 RAM
> - 16GB eMMC
> - 10/100/1000 Base-T Ethernet
> - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
> - RTC chip
> - HDMI 2.1 video
> - S/PDIF optical output
> - ES8323 audio codec
> - Analogue headphone output
> - 3x USB 2.0 ports (1x OTG)
> - IR receiver
> - 1x Power LED (white)
> - 1x Power button (rear)
> - 1x Update/Reset button (underside)
> - 1x micro SD card slot
> 
> Tested-by: Wes Bradley <komplex@live.ie>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |   1 +
>  .../dts/amlogic/meson-gxm-minix-neo-u9h.dts   | 120 ++++++++++++++++++
>  2 files changed, 121 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index dce41cd3f347..46e67de3d6d2 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
> new file mode 100644
> index 000000000000..a414cd39c2b1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> +	compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm";
> +	model = "Minix Neo U9-H";
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		white {
> +			color = <LED_COLOR_ID_WHITE>;
> +			function = LED_FUNCTION_POWER;
> +			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +			panic-indicator;
> +		};
> +	};
> +
> +	adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 0>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1710000>;
> +
> +		button-function {
> +			label = "update";
> +			linux,code = <KEY_VENDOR>;
> +			press-threshold-microvolt = <10000>;
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <100>;
> +
> +		button@0 {
> +			label = "power";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&ethmac {
> +	pinctrl-0 = <&eth_pins>;
> +	pinctrl-names = "default";
> +	phy-handle = <&external_phy>;
> +	amlogic,tx-delay-ns = <2>;
> +	phy-mode = "rgmii";
> +};
> +
> +&external_mdio {
> +	external_phy: ethernet-phy@0 {
> +		/* Realtek RTL8211F (0x001cc916) */
> +		reg = <0>;
> +		max-speed = <1000>;
> +
> +		reset-assert-us = <10000>;
> +		reset-deassert-us = <80000>;
> +		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
> +
> +		interrupt-parent = <&gpio_intc>;
> +		/* MAC_INTR on GPIOZ_15 */
> +		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +&ir {
> +	linux,rc-map-name = "rc-minix-neo";
> +};
> +
> +&i2c_B {
> +	status = "okay";
> +	pinctrl-0 = <&i2c_b_pins>;
> +	pinctrl-names = "default";
> +
> +	rtc: rtc@51 {
> +		status = "okay";
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "xin32k";
> +		wakeup-source;
> +	};
> +};
> +
> +&sd_emmc_a {
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		max-speed = <2000000>;
> +		clocks = <&wifi32k>;
> +		clock-names = "lpo";
> +	};
> +};
> 

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H
  2021-02-01 21:05 [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H Christian Hewitt
  2021-02-01 21:05 ` [PATCH 2/2] arm64: dts: meson: add initial device-tree for " Christian Hewitt
  2021-02-09 20:57 ` [PATCH 1/2] dt-bindings: arm: amlogic: add support for the " Rob Herring
@ 2021-03-08 17:39 ` Kevin Hilman
  2 siblings, 0 replies; 5+ messages in thread
From: Kevin Hilman @ 2021-03-08 17:39 UTC (permalink / raw)
  To: Rob Herring, linux-arm-kernel, linux-kernel, devicetree,
	linux-amlogic, Christian Hewitt, Mark Rutland

On Mon, 1 Feb 2021 21:05:07 +0000, Christian Hewitt wrote:
> The Minix NEO U9-H is a small form-factor Android STB based on the
> Amlogic Q200 reference board with an S912-H chip.

Applied, thanks!

[1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H
      commit: 15c4dd131ce576f0150fadf7a3264c865b051eba
[2/2] arm64: dts: meson: add initial device-tree for Minix NEO U9-H
      commit: 0e9fed92c67cb886b3308df4890126d75db2ad67

Best regards,
-- 
Kevin Hilman <khilman@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-01 21:05 [PATCH 1/2] dt-bindings: arm: amlogic: add support for the Minix NEO U9-H Christian Hewitt
2021-02-01 21:05 ` [PATCH 2/2] arm64: dts: meson: add initial device-tree for " Christian Hewitt
2021-02-10  8:11   ` Neil Armstrong
2021-02-09 20:57 ` [PATCH 1/2] dt-bindings: arm: amlogic: add support for the " Rob Herring
2021-03-08 17:39 ` Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git