Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/6] arm64: add support for the Khadas VIM3
@ 2019-07-31 12:39 Neil Armstrong
  2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
                   ` (6 more replies)
  0 siblings, 7 replies; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman
  Cc: linux-amlogic, christianshewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:

- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

First of all, the S922X and A311D are now specified since they differ
by some HW features and the capable operating points.

A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
A311D SoCs supported by two variants of the board.

Odroid-N2 is changed to use the s922x.dtsi include.

Dependencies:
- patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]

[1] https://patchwork.kernel.org/cover/11063837/

Christian Hewitt (4):
  soc: amlogic: meson-gx-socinfo: add A311D id
  dt-bindings: arm: amlogic: add support for the Khadas VIM3
  arm64: dts: meson-g12b: support a311d and s922x cpu operating points
  arm64: dts: meson-g12b-khadas-vim3: add initial device-tree

Neil Armstrong (2):
  dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
    A311D SoC

 .../devicetree/bindings/arm/amlogic.yaml      |   9 +
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../amlogic/meson-g12b-a311d-khadas-vim3.dts  |  15 +
 .../boot/dts/amlogic/meson-g12b-a311d.dtsi    | 149 +++++
 .../dts/amlogic/meson-g12b-khadas-vim3.dtsi   | 542 ++++++++++++++++++
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts |   2 +-
 .../amlogic/meson-g12b-s922x-khadas-vim3.dts  |  15 +
 .../boot/dts/amlogic/meson-g12b-s922x.dtsi    | 124 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   | 115 ----
 drivers/soc/amlogic/meson-gx-socinfo.c        |   1 +
 10 files changed, 858 insertions(+), 116 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi

-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
@ 2019-07-31 12:39 ` Neil Armstrong
  2019-08-05 21:47   ` Kevin Hilman
  2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman
  Cc: linux-amlogic, Christian Hewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

From: Christian Hewitt <christianshewitt@gmail.com>

Add the SoC ID for the A311D Amlogic SoC.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/soc/amlogic/meson-gx-socinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
index bca34954518e..ff86a75939e8 100644
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -65,6 +65,7 @@ static const struct meson_gx_package_id {
 	{ "S905D2", 0x28, 0x10, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "S922X", 0x29, 0x40, 0xf0 },
+	{ "A311D", 0x29, 0x10, 0xf0 },
 };
 
 static inline unsigned int socinfo_to_major(u32 socinfo)
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
  2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
@ 2019-07-31 12:39 ` Neil Armstrong
  2019-07-31 16:54   ` Rob Herring
  2019-08-05 21:46   ` Kevin Hilman
  2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
                   ` (4 subsequent siblings)
  6 siblings, 2 replies; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman, devicetree
  Cc: linux-amlogic, christianshewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

Add a specific compatible for the Amlogic G12B family based S922X SoC
to differentiate with the A311D SoC from the same family.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 325c6fd3566d..3c3bc806cd23 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -139,6 +139,7 @@ properties:
         items:
           - enum:
               - hardkernel,odroid-n2
+          - const: amlogic,s922x
           - const: amlogic,g12b
 
 ...
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
  2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
  2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
@ 2019-07-31 12:39 ` Neil Armstrong
  2019-07-31 16:55   ` Rob Herring
  2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman, devicetree
  Cc: linux-amlogic, christianshewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

Add a specific compatible for the Amlogic G12B bases A311D SoC used
in the Khadas VIM3.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 3c3bc806cd23..efa032d12402 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -135,6 +135,11 @@ properties:
               - amlogic,u200
           - const: amlogic,g12a
 
+      - description: Boards with the Amlogic Meson G12B A311D SoC
+        items:
+          - const: amlogic,a311d
+          - const: amlogic,g12b
+
       - description: Boards with the Amlogic Meson G12B S922X SoC
         items:
           - enum:
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
                   ` (2 preceding siblings ...)
  2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
@ 2019-07-31 12:39 ` Neil Armstrong
  2019-07-31 16:55   ` Rob Herring
  2019-07-31 12:39 ` [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points Neil Armstrong
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman, devicetree
  Cc: linux-amlogic, Christian Hewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

From: Christian Hewitt <christianshewitt@gmail.com>

The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:

- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index efa032d12402..04a2b0ef34c6 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -137,6 +137,8 @@ properties:
 
       - description: Boards with the Amlogic Meson G12B A311D SoC
         items:
+          - enum:
+              - khadas,vim3
           - const: amlogic,a311d
           - const: amlogic,g12b
 
@@ -144,6 +146,7 @@ properties:
         items:
           - enum:
               - hardkernel,odroid-n2
+              - khadas,vim3
           - const: amlogic,s922x
           - const: amlogic,g12b
 
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
                   ` (3 preceding siblings ...)
  2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
@ 2019-07-31 12:39 ` Neil Armstrong
  2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
  2019-08-08 17:57 ` [PATCH 0/6] arm64: add support for the Khadas VIM3 Kevin Hilman
  6 siblings, 0 replies; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:39 UTC (permalink / raw)
  To: khilman
  Cc: linux-amlogic, Christian Hewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

From: Christian Hewitt <christianshewitt@gmail.com>

Meson g12b ships with a low-speed (S922X) and high-speed (A311D) variant
so remove cpu_opp_table nodes in meson-g12b.dtsi and create two new dtsi
that can be included in device-specific dts files. Opp points were taken
from the vendor BSP kernel.

Also make meson-g12b-odroid-n2.dts include the new meson-g12b-s922x.dtsi.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12b-a311d.dtsi    | 149 ++++++++++++++++++
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts |   2 +-
 .../boot/dts/amlogic/meson-g12b-s922x.dtsi    | 124 +++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   | 115 --------------
 4 files changed, 274 insertions(+), 116 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
new file mode 100644
index 000000000000..d61f43052a34
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <811000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <901000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <951000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <831000>;
+		};
+
+                opp-1908000000 {
+                        opp-hz = /bits/ 64 <1908000000>;
+                        opp-microvolt = <861000>;
+                };
+
+                opp-2016000000 {
+                        opp-hz = /bits/ 64 <2016000000>;
+                        opp-microvolt = <911000>;
+                };
+
+                opp-2108000000 {
+                        opp-hz = /bits/ 64 <2108000000>;
+                        opp-microvolt = <951000>;
+                };
+
+                opp-2208000000 {
+                        opp-hz = /bits/ 64 <2208000000>;
+                        opp-microvolt = <1011000>;
+                };
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 777bfb938854..6cfc2c69bb4f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -6,7 +6,7 @@
 
 /dts-v1/;
 
-#include "meson-g12b.dtsi"
+#include "meson-g12b-s922x.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
new file mode 100644
index 000000000000..046cc332d07f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1896000000 {
+			opp-hz = /bits/ 64 <1896000000>;
+			opp-microvolt = <981000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <821000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <891000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 98ae8a7c8b41..d5edbc1a1991 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -95,121 +95,6 @@
 			compatible = "cache";
 		};
 	};
-
-	cpu_opp_table_0: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-666666666 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-1398000000 {
-			opp-hz = /bits/ 64 <1398000000>;
-			opp-microvolt = <761000>;
-		};
-
-		opp-1512000000 {
-			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <791000>;
-		};
-
-		opp-1608000000 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <831000>;
-		};
-
-		opp-1704000000 {
-			opp-hz = /bits/ 64 <1704000000>;
-			opp-microvolt = <861000>;
-		};
-
-		opp-1896000000 {
-			opp-hz = /bits/ 64 <1896000000>;
-			opp-microvolt = <981000>;
-		};
-	};
-
-	cpub_opp_table_1: opp-table-1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-666666666 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <771000>;
-		};
-
-		opp-1398000000 {
-			opp-hz = /bits/ 64 <1398000000>;
-			opp-microvolt = <791000>;
-		};
-
-		opp-1512000000 {
-			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <821000>;
-		};
-
-		opp-1608000000 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <861000>;
-		};
-
-		opp-1704000000 {
-			opp-hz = /bits/ 64 <1704000000>;
-			opp-microvolt = <891000>;
-		};
-	};
 };
 
 &clkc {
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
                   ` (4 preceding siblings ...)
  2019-07-31 12:39 ` [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points Neil Armstrong
@ 2019-07-31 12:40 ` Neil Armstrong
  2019-08-03 18:50   ` Martin Blumenstingl
  2019-08-08 17:57 ` [PATCH 0/6] arm64: add support for the Khadas VIM3 Kevin Hilman
  6 siblings, 1 reply; 18+ messages in thread
From: Neil Armstrong @ 2019-07-31 12:40 UTC (permalink / raw)
  To: khilman
  Cc: linux-amlogic, Christian Hewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

From: Christian Hewitt <christianshewitt@gmail.com>

The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:

- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
A311D SoCs supported by two variants of the board.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../amlogic/meson-g12b-a311d-khadas-vim3.dts  |  15 +
 .../dts/amlogic/meson-g12b-khadas-vim3.dtsi   | 542 ++++++++++++++++++
 .../amlogic/meson-g12b-s922x-khadas-vim3.dts  |  15 +
 4 files changed, 574 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 07b861fe5fa5..ae5e8d0c08da 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
new file mode 100644
index 000000000000..73128ed24361
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
new file mode 100644
index 000000000000..382148ef882a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Khadas VIM3";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			label = "vim3:white";
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		red {
+			label = "vim3:red";
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-KHADAS-VIM3";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&ethmac {
+        pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+        phy-mode = "rgmii";
+        phy-handle = <&external_phy>;
+        amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	gpio_expander: gpio-controller@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+        status = "okay";
+        pinctrl-0 = <&pwm_e_pins>;
+        pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
new file mode 100644
index 000000000000..6bcf972b8bfa
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b";
+};
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
@ 2019-07-31 16:54   ` Rob Herring
  2019-08-05 21:46   ` Kevin Hilman
  1 sibling, 0 replies; 18+ messages in thread
From: Rob Herring @ 2019-07-31 16:54 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: devicetree, Kevin Hilman, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Wed, Jul 31, 2019 at 6:40 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add a specific compatible for the Amlogic G12B family based S922X SoC
> to differentiate with the A311D SoC from the same family.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC
  2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
@ 2019-07-31 16:55   ` Rob Herring
  0 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2019-07-31 16:55 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: devicetree, Kevin Hilman, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Wed, Jul 31, 2019 at 6:40 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add a specific compatible for the Amlogic G12B bases A311D SoC used
> in the Khadas VIM3.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 5 +++++
>  1 file changed, 5 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3
  2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
@ 2019-07-31 16:55   ` Rob Herring
  0 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2019-07-31 16:55 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: devicetree, Kevin Hilman, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Wed, Jul 31, 2019 at 6:40 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +++
>  1 file changed, 3 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
  2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
@ 2019-08-03 18:50   ` Martin Blumenstingl
  2019-08-06 15:48     ` Neil Armstrong
  0 siblings, 1 reply; 18+ messages in thread
From: Martin Blumenstingl @ 2019-08-03 18:50 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: khilman, Christian Hewitt, linux-kernel, linux-arm-kernel, linux-amlogic

On Wed, Jul 31, 2019 at 2:44 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> +       memory@0 {
> +               device_type = "memory";
> +               reg = <0x0 0x0 0x0 0x40000000>;
nit-pick: we typically use the memory size used in the board size with
the lowest amount of RAM - 2GiB in this case. so I would change it to
0x80000000

[...]
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               white {
> +                       label = "vim3:white";
downstream sources use label="sys_led"
should we call it vim3:white:sys?

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
  2019-07-31 16:54   ` Rob Herring
@ 2019-08-05 21:46   ` Kevin Hilman
  2019-08-05 22:21     ` Rob Herring
  1 sibling, 1 reply; 18+ messages in thread
From: Kevin Hilman @ 2019-08-05 21:46 UTC (permalink / raw)
  To: Neil Armstrong, devicetree
  Cc: linux-amlogic, christianshewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

Neil Armstrong <narmstrong@baylibre.com> writes:

> Add a specific compatible for the Amlogic G12B family based S922X SoC
> to differentiate with the A311D SoC from the same family.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> index 325c6fd3566d..3c3bc806cd23 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> @@ -139,6 +139,7 @@ properties:
>          items:
>            - enum:
>                - hardkernel,odroid-n2
> +          - const: amlogic,s922x
>            - const: amlogic,g12b

nit: in previous binding docs, we were trying to keep these sorted
alphabetically.  I'll reorder the new "s922x" after "g12b" when
applying.

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id
  2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
@ 2019-08-05 21:47   ` Kevin Hilman
  0 siblings, 0 replies; 18+ messages in thread
From: Kevin Hilman @ 2019-08-05 21:47 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: linux-amlogic, Christian Hewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

Neil Armstrong <narmstrong@baylibre.com> writes:

> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Add the SoC ID for the A311D Amlogic SoC.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Queued for v5.4,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-08-05 21:46   ` Kevin Hilman
@ 2019-08-05 22:21     ` Rob Herring
  2019-08-05 22:26       ` Rob Herring
  2019-08-08  3:02       ` Kevin Hilman
  0 siblings, 2 replies; 18+ messages in thread
From: Rob Herring @ 2019-08-05 22:21 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: devicetree, Neil Armstrong, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Mon, Aug 5, 2019 at 3:46 PM Kevin Hilman <khilman@baylibre.com> wrote:
>
> Neil Armstrong <narmstrong@baylibre.com> writes:
>
> > Add a specific compatible for the Amlogic G12B family based S922X SoC
> > to differentiate with the A311D SoC from the same family.
> >
> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> > ---
> >  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > index 325c6fd3566d..3c3bc806cd23 100644
> > --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> > +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > @@ -139,6 +139,7 @@ properties:
> >          items:
> >            - enum:
> >                - hardkernel,odroid-n2
> > +          - const: amlogic,s922x
> >            - const: amlogic,g12b
>
> nit: in previous binding docs, we were trying to keep these sorted
> alphabetically.  I'll reorder the new "s922x" after "g12b" when
> applying.

No, this is not documentation ordering. It's the order compatible
strings must be in.

Rob

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-08-05 22:21     ` Rob Herring
@ 2019-08-05 22:26       ` Rob Herring
  2019-08-08  3:02       ` Kevin Hilman
  1 sibling, 0 replies; 18+ messages in thread
From: Rob Herring @ 2019-08-05 22:26 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: devicetree, Neil Armstrong, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Mon, Aug 5, 2019 at 4:21 PM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Aug 5, 2019 at 3:46 PM Kevin Hilman <khilman@baylibre.com> wrote:
> >
> > Neil Armstrong <narmstrong@baylibre.com> writes:
> >
> > > Add a specific compatible for the Amlogic G12B family based S922X SoC
> > > to differentiate with the A311D SoC from the same family.
> > >
> > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> > > ---
> > >  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > > index 325c6fd3566d..3c3bc806cd23 100644
> > > --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > > @@ -139,6 +139,7 @@ properties:
> > >          items:
> > >            - enum:
> > >                - hardkernel,odroid-n2
> > > +          - const: amlogic,s922x
> > >            - const: amlogic,g12b
> >
> > nit: in previous binding docs, we were trying to keep these sorted
> > alphabetically.  I'll reorder the new "s922x" after "g12b" when
> > applying.
>
> No, this is not documentation ordering. It's the order compatible
> strings must be in.

BTW, you probably should run:

make DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/amlogic.yaml
dtbs_check

on your tree regularly. This will catch any errors like this and
undocumented boards (but not undocumented SoCs, still too many for me
to get that in place).

Rob

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
  2019-08-03 18:50   ` Martin Blumenstingl
@ 2019-08-06 15:48     ` Neil Armstrong
  0 siblings, 0 replies; 18+ messages in thread
From: Neil Armstrong @ 2019-08-06 15:48 UTC (permalink / raw)
  To: Martin Blumenstingl
  Cc: khilman, Christian Hewitt, linux-kernel, linux-arm-kernel, linux-amlogic

On 03/08/2019 20:50, Martin Blumenstingl wrote:
> On Wed, Jul 31, 2019 at 2:44 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> [...]
>> +       memory@0 {
>> +               device_type = "memory";
>> +               reg = <0x0 0x0 0x0 0x40000000>;
> nit-pick: we typically use the memory size used in the board size with
> the lowest amount of RAM - 2GiB in this case. so I would change it to
> 0x80000000

Right

> 
> [...]
>> +       leds {
>> +               compatible = "gpio-leds";
>> +
>> +               white {
>> +                       label = "vim3:white";
> downstream sources use label="sys_led"
> should we call it vim3:white:sys?
> 

OK, no problem
Thanks for the review.

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  2019-08-05 22:21     ` Rob Herring
  2019-08-05 22:26       ` Rob Herring
@ 2019-08-08  3:02       ` Kevin Hilman
  1 sibling, 0 replies; 18+ messages in thread
From: Kevin Hilman @ 2019-08-08  3:02 UTC (permalink / raw)
  To: Rob Herring
  Cc: devicetree, Neil Armstrong, Christian Hewitt, linux-kernel,
	linux-amlogic,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

Rob Herring <robh@kernel.org> writes:

> On Mon, Aug 5, 2019 at 3:46 PM Kevin Hilman <khilman@baylibre.com> wrote:
>>
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>>
>> > Add a specific compatible for the Amlogic G12B family based S922X SoC
>> > to differentiate with the A311D SoC from the same family.
>> >
>> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> > ---
>> >  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
>> >  1 file changed, 1 insertion(+)
>> >
>> > diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
>> > index 325c6fd3566d..3c3bc806cd23 100644
>> > --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
>> > +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
>> > @@ -139,6 +139,7 @@ properties:
>> >          items:
>> >            - enum:
>> >                - hardkernel,odroid-n2
>> > +          - const: amlogic,s922x
>> >            - const: amlogic,g12b
>>
>> nit: in previous binding docs, we were trying to keep these sorted
>> alphabetically.  I'll reorder the new "s922x" after "g12b" when
>> applying.
>
> No, this is not documentation ordering. It's the order compatible
> strings must be in.

Ah, thanks for clarifying,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 0/6] arm64: add support for the Khadas VIM3
  2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
                   ` (5 preceding siblings ...)
  2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
@ 2019-08-08 17:57 ` Kevin Hilman
  6 siblings, 0 replies; 18+ messages in thread
From: Kevin Hilman @ 2019-08-08 17:57 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: linux-amlogic, christianshewitt, linux-kernel, linux-arm-kernel,
	Neil Armstrong

Neil Armstrong <narmstrong@baylibre.com> writes:

> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> First of all, the S922X and A311D are now specified since they differ
> by some HW features and the capable operating points.
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Odroid-N2 is changed to use the s922x.dtsi include.
>
> Dependencies:
> - patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]

And patch 6 on the clock series (specificly the new CPU_CLKB id)

> [1] https://patchwork.kernel.org/cover/11063837/
>
> Christian Hewitt (4):
>   soc: amlogic: meson-gx-socinfo: add A311D id

Queued in v5.4/drivers

>   dt-bindings: arm: amlogic: add support for the Khadas VIM3
>   arm64: dts: meson-g12b: support a311d and s922x cpu operating points

Queued in v5.4/dt64

>   arm64: dts: meson-g12b-khadas-vim3: add initial device-tree

This one I've left off for now due to the clock dependency and some
suggestions from Martin.

> Neil Armstrong (2):
>   dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
>   dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
>     A311D SoC

Queued in v5.4/dt64

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, back to index

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
2019-08-05 21:47   ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
2019-07-31 16:54   ` Rob Herring
2019-08-05 21:46   ` Kevin Hilman
2019-08-05 22:21     ` Rob Herring
2019-08-05 22:26       ` Rob Herring
2019-08-08  3:02       ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
2019-07-31 16:55   ` Rob Herring
2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
2019-07-31 16:55   ` Rob Herring
2019-07-31 12:39 ` [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points Neil Armstrong
2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
2019-08-03 18:50   ` Martin Blumenstingl
2019-08-06 15:48     ` Neil Armstrong
2019-08-08 17:57 ` [PATCH 0/6] arm64: add support for the Khadas VIM3 Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox