Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
@ 2019-11-17 13:59 Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: Martin Blumenstingl, devicetree, linux-kernel, linux-arm-kernel,
	linux-clk

So far the HHI clock controller has been providing the XTAL clock on
Amlogic Meson8/Meson8b/Meson8m2 SoCs.
This is not correct because the XTAL is actually a crystal on the
boards and the SoC has a dedicated input for it.

This updates the dt-bindings of the HHI clock controller and defines
a fixed-clock in meson.dtsi (along with switching everything over to
use this clock).
The clock driver needs three updates to use this:
- patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops
  the explicit reference to CLKID_XTAL while at the same time making
  the code much easier (thanks to Neil for providing this new method
  as part of the G12A CPU clock bringup!)
- patch #3 ensures that the clock driver doesn't rely on it's internal
  XTAL clock while not losing support for older .dtbs that don't have
  the XTAL clock input yet
- with patch #4 the clock controller's own XTAL clock is not registered
  anymore when a clock input is provided via OF

This series is a functional no-op. It's main goal is to better represent
how the actual hardware looks like.


Changes since v2 at [1]:
- add .fw_name in addition to .name in patch #3 as suggested by Jerome
- dropped the dts patch so this whole series targets clk-meson
- moved patch #5 from another series to this one because once we drop
  .name = "xtal" the clocks need to be aware of the OF node

Changes since v1 at [0]:
- add Rob's Reviewed-by to the dt-bindings patch
- check that "xtal" clock is actually passed via OF instead of checking
  that there's any parent at all (which in the worst case may not be the
  xtal clock) as suggested by Jerome
  

[0] https://patchwork.kernel.org/cover/11155515/
[1] https://patchwork.kernel.org/cover/11214189/


Martin Blumenstingl (5):
  dt-bindings: clock: meson8b: add the clock inputs
  clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
  clk: meson: meson8b: change references to the XTAL clock to use
    [fw_]name
  clk: meson: meson8b: don't register the XTAL clock when provided via
    OF
  clk: meson: meson8b: use of_clk_hw_register to register the clocks

 .../bindings/clock/amlogic,meson8b-clkc.txt   |   5 +
 drivers/clk/meson/meson8b.c                   | 113 ++++++++++--------
 2 files changed, 67 insertions(+), 51 deletions(-)

-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 1/5] dt-bindings: clock: meson8b: add the clock inputs
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
@ 2019-11-17 13:59 ` Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier Martin Blumenstingl
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: devicetree, Rob Herring, Martin Blumenstingl, linux-kernel,
	linux-clk, linux-arm-kernel

The clock controller on Meson8/Meson8b/Meson8m2 has three (known)
inputs:
- "xtal": the main 24MHz crystal
- "ddr_pll": some of the audio clocks use the output of the DDR PLL as
  input
- "clk_32k": an optional clock signal which can be connected to GPIOAO_6
  (which then has to be switched to the CLK_32K_IN function)

Add the inputs to the documentation so we can wire up these inputs in a
follow-up patch.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../devicetree/bindings/clock/amlogic,meson8b-clkc.txt       | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
index 4d94091c1d2d..cc51e4746b3b 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -11,6 +11,11 @@ Required Properties:
 	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
 - #clock-cells: should be 1.
 - #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+  * "xtal": the 24MHz system oscillator
+  * "ddr_pll": the DDR PLL clock
+  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
 
 Parent node should have the following properties :
 - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
@ 2019-11-17 13:59 ` Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 3/5] clk: meson: meson8b: change references to the XTAL clock to use [fw_]name Martin Blumenstingl
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: Martin Blumenstingl, devicetree, linux-kernel, linux-arm-kernel,
	linux-clk

Switch from clk_set_parent() to clk_hw_set_parent() now that we have a
way to configure a mux clock based on clk_hw pointers. This simplifies
the meson8b_cpu_clk_notifier_cb logic. No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 67e6691e080c..d376f80e806d 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3585,7 +3585,7 @@ static const struct reset_control_ops meson8b_clk_reset_ops = {
 
 struct meson8b_nb_data {
 	struct notifier_block nb;
-	struct clk_hw_onecell_data *onecell_data;
+	struct clk_hw *cpu_clk;
 };
 
 static int meson8b_cpu_clk_notifier_cb(struct notifier_block *nb,
@@ -3593,30 +3593,25 @@ static int meson8b_cpu_clk_notifier_cb(struct notifier_block *nb,
 {
 	struct meson8b_nb_data *nb_data =
 		container_of(nb, struct meson8b_nb_data, nb);
-	struct clk_hw **hws = nb_data->onecell_data->hws;
-	struct clk_hw *cpu_clk_hw, *parent_clk_hw;
-	struct clk *cpu_clk, *parent_clk;
+	struct clk_hw *parent_clk;
 	int ret;
 
 	switch (event) {
 	case PRE_RATE_CHANGE:
-		parent_clk_hw = hws[CLKID_XTAL];
+		/* xtal */
+		parent_clk = clk_hw_get_parent_by_index(nb_data->cpu_clk, 0);
 		break;
 
 	case POST_RATE_CHANGE:
-		parent_clk_hw = hws[CLKID_CPU_SCALE_OUT_SEL];
+		/* cpu_scale_out_sel */
+		parent_clk = clk_hw_get_parent_by_index(nb_data->cpu_clk, 1);
 		break;
 
 	default:
 		return NOTIFY_DONE;
 	}
 
-	cpu_clk_hw = hws[CLKID_CPUCLK];
-	cpu_clk = __clk_lookup(clk_hw_get_name(cpu_clk_hw));
-
-	parent_clk = __clk_lookup(clk_hw_get_name(parent_clk_hw));
-
-	ret = clk_set_parent(cpu_clk, parent_clk);
+	ret = clk_hw_set_parent(nb_data->cpu_clk, parent_clk);
 	if (ret)
 		return notifier_from_errno(ret);
 
@@ -3695,7 +3690,7 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 			return;
 	}
 
-	meson8b_cpu_nb_data.onecell_data = clk_hw_onecell_data;
+	meson8b_cpu_nb_data.cpu_clk = clk_hw_onecell_data->hws[CLKID_CPUCLK];
 
 	/*
 	 * FIXME we shouldn't program the muxes in notifier handlers. The
-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 3/5] clk: meson: meson8b: change references to the XTAL clock to use [fw_]name
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier Martin Blumenstingl
@ 2019-11-17 13:59 ` Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF Martin Blumenstingl
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: Martin Blumenstingl, devicetree, linux-kernel, linux-arm-kernel,
	linux-clk

The XTAL clock is an actual crystal which is mounted on the PCB. Thus
the meson8b clock controller driver should not provide the XTAL clock.

The meson8b clock controller driver must not use references to
the meson8b_xtal clock anymore before we can provide the XTAL clock
via OF. Replace the references to the meson8b_xtal.hw by using
clk_parent_data's .fw_name and .name = "xtal" (along with index = -1).
This makes the common clock framework use the clock provided via OF and
if that's not available it falls back to getting the clock by it's name
(which is then the clk_fixed_rate which we register in our driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 78 +++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index d376f80e806d..f857a2c4d025 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -97,8 +97,10 @@ static struct clk_regmap meson8b_fixed_pll_dco = {
 	.hw.init = &(struct clk_init_data){
 		.name = "fixed_pll_dco",
 		.ops = &meson_clk_pll_ro_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+			.name = "xtal",
+			.index = -1,
 		},
 		.num_parents = 1,
 	},
@@ -162,8 +164,10 @@ static struct clk_regmap meson8b_hdmi_pll_dco = {
 		/* sometimes also called "HPLL" or "HPLL PLL" */
 		.name = "hdmi_pll_dco",
 		.ops = &meson_clk_pll_ro_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+			.name = "xtal",
+			.index = -1,
 		},
 		.num_parents = 1,
 	},
@@ -237,8 +241,10 @@ static struct clk_regmap meson8b_sys_pll_dco = {
 	.hw.init = &(struct clk_init_data){
 		.name = "sys_pll_dco",
 		.ops = &meson_clk_pll_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+			.name = "xtal",
+			.index = -1,
 		},
 		.num_parents = 1,
 	},
@@ -631,9 +637,9 @@ static struct clk_regmap meson8b_cpu_in_sel = {
 	.hw.init = &(struct clk_init_data){
 		.name = "cpu_in_sel",
 		.ops = &clk_regmap_mux_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw,
-			&meson8b_sys_pll.hw,
+		.parent_data = (const struct clk_parent_data[]) {
+			{ .fw_name = "xtal", .name = "xtal", .index = -1, },
+			{ .hw = &meson8b_sys_pll.hw, },
 		},
 		.num_parents = 2,
 		.flags = (CLK_SET_RATE_PARENT |
@@ -736,9 +742,9 @@ static struct clk_regmap meson8b_cpu_clk = {
 	.hw.init = &(struct clk_init_data){
 		.name = "cpu_clk",
 		.ops = &clk_regmap_mux_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw,
-			&meson8b_cpu_scale_out_sel.hw,
+		.parent_data = (const struct clk_parent_data[]) {
+			{ .fw_name = "xtal", .name = "xtal", .index = -1, },
+			{ .hw = &meson8b_cpu_scale_out_sel.hw, },
 		},
 		.num_parents = 2,
 		.flags = (CLK_SET_RATE_PARENT |
@@ -758,12 +764,12 @@ static struct clk_regmap meson8b_nand_clk_sel = {
 		.name = "nand_clk_sel",
 		.ops = &clk_regmap_mux_ops,
 		/* FIXME all other parents are unknown: */
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_fclk_div4.hw,
-			&meson8b_fclk_div3.hw,
-			&meson8b_fclk_div5.hw,
-			&meson8b_fclk_div7.hw,
-			&meson8b_xtal.hw,
+		.parent_data = (const struct clk_parent_data[]) {
+			{ .hw = &meson8b_fclk_div4.hw, },
+			{ .hw = &meson8b_fclk_div3.hw, },
+			{ .hw = &meson8b_fclk_div5.hw, },
+			{ .hw = &meson8b_fclk_div7.hw, },
+			{ .fw_name = "xtal", .name = "xtal", .index = -1, },
 		},
 		.num_parents = 5,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1721,8 +1727,10 @@ static struct clk_regmap meson8b_hdmi_sys_sel = {
 		.name = "hdmi_sys_sel",
 		.ops = &clk_regmap_mux_ro_ops,
 		/* FIXME: all other parents are unknown */
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+			.name = "xtal",
+			.index = -1,
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_NO_REPARENT,
@@ -1767,14 +1775,14 @@ static struct clk_regmap meson8b_hdmi_sys = {
  * muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
  * has mali_0 and no glitch-free mux.
  */
-static const struct clk_hw *meson8b_mali_0_1_parent_hws[] = {
-	&meson8b_xtal.hw,
-	&meson8b_mpll2.hw,
-	&meson8b_mpll1.hw,
-	&meson8b_fclk_div7.hw,
-	&meson8b_fclk_div4.hw,
-	&meson8b_fclk_div3.hw,
-	&meson8b_fclk_div5.hw,
+static const struct clk_parent_data meson8b_mali_0_1_parent_data[] = {
+	{ .fw_name = "xtal", .name = "xtal", .index = -1, },
+	{ .hw = &meson8b_mpll2.hw, },
+	{ .hw = &meson8b_mpll1.hw, },
+	{ .hw = &meson8b_fclk_div7.hw, },
+	{ .hw = &meson8b_fclk_div4.hw, },
+	{ .hw = &meson8b_fclk_div3.hw, },
+	{ .hw = &meson8b_fclk_div5.hw, },
 };
 
 static u32 meson8b_mali_0_1_mux_table[] = { 0, 2, 3, 4, 5, 6, 7 };
@@ -1789,8 +1797,8 @@ static struct clk_regmap meson8b_mali_0_sel = {
 	.hw.init = &(struct clk_init_data){
 		.name = "mali_0_sel",
 		.ops = &clk_regmap_mux_ops,
-		.parent_hws = meson8b_mali_0_1_parent_hws,
-		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_hws),
+		.parent_data = meson8b_mali_0_1_parent_data,
+		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_data),
 		/*
 		 * Don't propagate rate changes up because the only changeable
 		 * parents are mpll1 and mpll2 but we need those for audio and
@@ -1844,8 +1852,8 @@ static struct clk_regmap meson8b_mali_1_sel = {
 	.hw.init = &(struct clk_init_data){
 		.name = "mali_1_sel",
 		.ops = &clk_regmap_mux_ops,
-		.parent_hws = meson8b_mali_0_1_parent_hws,
-		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_hws),
+		.parent_data = meson8b_mali_0_1_parent_data,
+		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_data),
 		/*
 		 * Don't propagate rate changes up because the only changeable
 		 * parents are mpll1 and mpll2 but we need those for audio and
@@ -1944,8 +1952,10 @@ static struct clk_regmap meson8m2_gp_pll_dco = {
 	.hw.init = &(struct clk_init_data){
 		.name = "gp_pll_dco",
 		.ops = &meson_clk_pll_ops,
-		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_xtal.hw
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+			.name = "xtal",
+			.index = -1,
 		},
 		.num_parents = 1,
 	},
-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
                   ` (2 preceding siblings ...)
  2019-11-17 13:59 ` [PATCH v3 3/5] clk: meson: meson8b: change references to the XTAL clock to use [fw_]name Martin Blumenstingl
@ 2019-11-17 13:59 ` Martin Blumenstingl
  2019-11-17 13:59 ` [PATCH v3 5/5] clk: meson: meson8b: use of_clk_hw_register to register the clocks Martin Blumenstingl
  2019-11-18  9:55 ` [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Jerome Brunet
  5 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: Martin Blumenstingl, devicetree, linux-kernel, linux-arm-kernel,
	linux-clk

The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index f857a2c4d025..44e97bacd628 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3687,10 +3687,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 		meson8b_clk_regmaps[i]->map = map;
 
 	/*
-	 * register all clks
-	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+	 * XTAL clock as input.
 	 */
-	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+	if (!IS_ERR(of_clk_get_by_name(np, "xtal")))
+		i = CLKID_PLL_FIXED;
+	else
+		i = CLKID_XTAL;
+
+	/* register all clks */
+	for (; i < CLK_NR_CLKS; i++) {
 		/* array might be sparse */
 		if (!clk_hw_onecell_data->hws[i])
 			continue;
-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 5/5] clk: meson: meson8b: use of_clk_hw_register to register the clocks
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
                   ` (3 preceding siblings ...)
  2019-11-17 13:59 ` [PATCH v3 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF Martin Blumenstingl
@ 2019-11-17 13:59 ` Martin Blumenstingl
  2019-11-18  9:55 ` [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Jerome Brunet
  5 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2019-11-17 13:59 UTC (permalink / raw)
  To: narmstrong, jbrunet, linux-amlogic
  Cc: Martin Blumenstingl, devicetree, linux-kernel, linux-arm-kernel,
	linux-clk

Switch from clk_hw_register to of_clk_hw_register so we can use
clk_parent_data.fw_name. This will be used to get the "xtal", "ddr_pll"
and possibly others from the .dtb.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 44e97bacd628..3408297bff65 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3701,7 +3701,7 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 		if (!clk_hw_onecell_data->hws[i])
 			continue;
 
-		ret = clk_hw_register(NULL, clk_hw_onecell_data->hws[i]);
+		ret = of_clk_hw_register(np, clk_hw_onecell_data->hws[i]);
 		if (ret)
 			return;
 	}
-- 
2.24.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
  2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
                   ` (4 preceding siblings ...)
  2019-11-17 13:59 ` [PATCH v3 5/5] clk: meson: meson8b: use of_clk_hw_register to register the clocks Martin Blumenstingl
@ 2019-11-18  9:55 ` Jerome Brunet
  5 siblings, 0 replies; 7+ messages in thread
From: Jerome Brunet @ 2019-11-18  9:55 UTC (permalink / raw)
  To: Martin Blumenstingl, narmstrong, linux-amlogic
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-clk


On Sun 17 Nov 2019 at 14:59, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> So far the HHI clock controller has been providing the XTAL clock on
> Amlogic Meson8/Meson8b/Meson8m2 SoCs.
> This is not correct because the XTAL is actually a crystal on the
> boards and the SoC has a dedicated input for it.
>
> This updates the dt-bindings of the HHI clock controller and defines
> a fixed-clock in meson.dtsi (along with switching everything over to
> use this clock).
> The clock driver needs three updates to use this:
> - patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops
>   the explicit reference to CLKID_XTAL while at the same time making
>   the code much easier (thanks to Neil for providing this new method
>   as part of the G12A CPU clock bringup!)
> - patch #3 ensures that the clock driver doesn't rely on it's internal
>   XTAL clock while not losing support for older .dtbs that don't have
>   the XTAL clock input yet
> - with patch #4 the clock controller's own XTAL clock is not registered
>   anymore when a clock input is provided via OF
>
> This series is a functional no-op. It's main goal is to better represent
> how the actual hardware looks like.
>
>
> Changes since v2 at [1]:
> - add .fw_name in addition to .name in patch #3 as suggested by Jerome
> - dropped the dts patch so this whole series targets clk-meson
> - moved patch #5 from another series to this one because once we drop
>   .name = "xtal" the clocks need to be aware of the OF node
>
> Changes since v1 at [0]:
> - add Rob's Reviewed-by to the dt-bindings patch
> - check that "xtal" clock is actually passed via OF instead of checking
>   that there's any parent at all (which in the worst case may not be the
>   xtal clock) as suggested by Jerome
>   
>
> [0] https://patchwork.kernel.org/cover/11155515/
> [1] https://patchwork.kernel.org/cover/11214189/
>
>
> Martin Blumenstingl (5):
>   dt-bindings: clock: meson8b: add the clock inputs
>   clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
>   clk: meson: meson8b: change references to the XTAL clock to use
>     [fw_]name
>   clk: meson: meson8b: don't register the XTAL clock when provided via
>     OF
>   clk: meson: meson8b: use of_clk_hw_register to register the clocks
>
>  .../bindings/clock/amlogic,meson8b-clkc.txt   |   5 +
>  drivers/clk/meson/meson8b.c                   | 113 ++++++++++--------
>  2 files changed, 67 insertions(+), 51 deletions(-)

Applied for v5.6
Please note this will get rebased once v5.5-rc1 is out

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-17 13:59 [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
2019-11-17 13:59 ` [PATCH v3 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
2019-11-17 13:59 ` [PATCH v3 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier Martin Blumenstingl
2019-11-17 13:59 ` [PATCH v3 3/5] clk: meson: meson8b: change references to the XTAL clock to use [fw_]name Martin Blumenstingl
2019-11-17 13:59 ` [PATCH v3 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF Martin Blumenstingl
2019-11-17 13:59 ` [PATCH v3 5/5] clk: meson: meson8b: use of_clk_hw_register to register the clocks Martin Blumenstingl
2019-11-18  9:55 ` [PATCH v3 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Jerome Brunet

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git