Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] arm64: dts: meson: add more SM1 soundcards
@ 2020-07-18  7:25 Christian Hewitt
  2020-07-18  7:25 ` [PATCH 1/2] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Christian Hewitt @ 2020-07-18  7:25 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

This series adds basic support for LPCM audio over HDMI interfaces
to the Khadas VIM3L (reusing the same config as the VIM3) and the
HardKernel ODROID-C4 devices. I'm sure support can be extended to
include other hardware but this gets the HDMI port working as a
minimum capability. I have personally tested with both devices.

Christian Hewitt (2):
  arm64: dts: meson: add audio playback to odroid-c4
  arm64: dts: meson: add audio playback to khadas-vim3l

 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 88 +++++++++++++++++++
 2 files changed, 176 insertions(+)

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-18  7:25 [PATCH 0/2] arm64: dts: meson: add more SM1 soundcards Christian Hewitt
2020-07-18  7:25 ` [PATCH 1/2] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
2020-07-18  7:25 ` [PATCH 2/2] arm64: dts: meson: add audio playback to khadas-vim3l Christian Hewitt
2020-07-21  8:47 ` [PATCH 0/2] arm64: dts: meson: add more SM1 soundcards Jerome Brunet
2020-07-21 21:14 ` Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git