linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Christian Hewitt <christianshewitt@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 00/12] arm64: dts: meson: add more GX soundcards
Date: Tue, 21 Jul 2020 10:39:55 +0200	[thread overview]
Message-ID: <1jtuy18dno.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20200718065739.7802-1-christianshewitt@gmail.com>


On Sat 18 Jul 2020 at 08:57, Christian Hewitt <christianshewitt@gmail.com> wrote:

> From: chewitt <christianshewitt@gmail.com>
>
> This series adds basic support for LPCM audio over HDMI and S/PDIF
> interfaces to GXBB/GXL/GXM devices without support. I'm sure audio
> support can be extended in places (some devices have internal DACs
> and headphone hardware) but this gets the HDMI port working as a
> minimum capability.
>
> I have personally tested with the khadas-vim2, odroid-c2, and both
> wetek devices as I have them, and there are positive forum reports
> from users with vega-s95 and some no-name P20X box devices.

I'm under the impression that not *all* the boards below have tested
against these changes, on both output when applicable. I'm a bit
concerned by that. For the boards you don't have, it would be nice if
you could add a Tested-by Tag.

Tiny things, yet critical, such as regulators and pinctrl, may change.
People looking at our DT should be able to expect that things have been
tested and confirmed working at least once.

Apart from the comment regarding the regulators, the changes seems OK.

>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>
> Christian Hewitt (12):
>   arm64: dts: meson: add audio playback to a95x
>   arm64: dts: meson: add audio playback to khadas-vim2
>   arm64: dts: meson: add audio playback to nanopi-k2
>   arm64: dts: meson: add audio playback to nexbox-a1
>   arm64: dts: meson: add audio playback to odroid-c2
>   arm64: dts: meson: add audio playback to p201
>   arm64: dts: meson: add audio playback to p200
>   arm64: dts: meson: add audio playback to p212-s905x dtsi
>   arm64: dts: meson: add audio playback to rbox-pro
>   arm64: dts: meson: add audio playback to vega-s95 dtsi
>   arm64: dts: meson: add audio playback to wetek-hub
>   arm64: dts: meson: add audio playback to wetek-play2
>
>  .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 ++++++++++
>  .../dts/amlogic/meson-gxbb-nexbox-a95x.dts    | 40 ++++++++++
>  .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 40 ++++++++++
>  .../boot/dts/amlogic/meson-gxbb-p200.dts      | 61 ++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-p201.dts      | 40 ++++++++++
>  .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 61 ++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 ++++++++++
>  .../dts/amlogic/meson-gxbb-wetek-play2.dts    | 61 ++++++++++++++
>  .../dts/amlogic/meson-gxl-s905x-p212.dtsi     | 40 ++++++++++
>  .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 44 +++++++++-
>  .../boot/dts/amlogic/meson-gxm-nexbox-a1.dts  | 80 +++++++++++++++++++
>  .../boot/dts/amlogic/meson-gxm-rbox-pro.dts   | 80 +++++++++++++++++++
>  12 files changed, 624 insertions(+), 3 deletions(-)


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      parent reply	other threads:[~2020-07-21  8:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-18  6:57 [PATCH 00/12] arm64: dts: meson: add more GX soundcards Christian Hewitt
2020-07-18  6:57 ` [PATCH 01/12] arm64: dts: meson: add audio playback to a95x Christian Hewitt
2020-07-18  6:57 ` [PATCH 02/12] arm64: dts: meson: add audio playback to khadas-vim2 Christian Hewitt
2020-07-18  6:57 ` [PATCH 03/12] arm64: dts: meson: add audio playback to nanopi-k2 Christian Hewitt
2020-07-18  6:57 ` [PATCH 04/12] arm64: dts: meson: add audio playback to nexbox-a1 Christian Hewitt
2020-07-21  8:18   ` Jerome Brunet
2020-07-18  6:57 ` [PATCH 05/12] arm64: dts: meson: add audio playback to odroid-c2 Christian Hewitt
2020-07-18  6:57 ` [PATCH 06/12] arm64: dts: meson: add audio playback to p201 Christian Hewitt
2020-07-18  6:57 ` [PATCH 07/12] arm64: dts: meson: add audio playback to p200 Christian Hewitt
2020-07-18  6:57 ` [PATCH 08/12] arm64: dts: meson: add audio playback to p212-s905x dtsi Christian Hewitt
2020-07-18  6:57 ` [PATCH 09/12] arm64: dts: meson: add audio playback to rbox-pro Christian Hewitt
2020-07-21  8:21   ` Jerome Brunet
2020-07-18  6:57 ` [PATCH 10/12] arm64: dts: meson: add audio playback to vega-s95 dtsi Christian Hewitt
2020-07-18  6:57 ` [PATCH 11/12] arm64: dts: meson: add audio playback to wetek-hub Christian Hewitt
2020-07-18  6:57 ` [PATCH 12/12] arm64: dts: meson: add audio playback to wetek-play2 Christian Hewitt
2020-07-21  8:39 ` Jerome Brunet [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1jtuy18dno.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=christianshewitt@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).