Re: [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver

[Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>]

On Wed, Dec 19, 2018 at 07:13:47PM +0800, Hanjie Lin wrote:
> 
> 
> On 2018/12/19 6:47, Bjorn Helgaas wrote:
> > On Tue, Dec 18, 2018 at 04:04:46PM +0800, Hanjie Lin wrote:
> >> From: Yue Wang <yue.wang@amlogic.com>
> >>
> >> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
> >> PCI core. This patch adds the driver support for Meson PCIe controller.
> > 
> > I don't have any comments on the code itself; just the trivial things
> > below.  No need to repost for these unless you're changing something
> > else.
> > 
> > I thought it looked very pretty overall, thanks for paying attention
> > to that!
> > 
> >> +static int meson_size_to_payload(struct meson_pcie *mp, int size)
> >> +{
> >> +	struct device *dev = mp->pci.dev;
> >> +
> >> +	/*
> >> +	 * dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
> >> +	 * So if input size is not 2^order alignment or less than 2^7 or bigger
> >> +	 * than 2^12, just set to default size 2^(1+7).
> >> +	 */
> >> +	if (!is_power_of_2(size) || size < 128 || size > 4096) {
> >> +		dev_warn(dev, "playload size %d, set to default 256\n", size);
> > 
> > s/playload/payload/
> > 
> >> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
> >> +{
> >> +	u32 val = 0;
> > 
> > Unnecessary initialization.
> > 
> >> +	int max_payload_size = meson_size_to_payload(mp, size);
> >> +
> >> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
> > 
> >> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> >> +				  u32 *val)
> >> +{
> >> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> >> +	int ret;
> >> +
> >> +	ret = dw_pcie_read(pci->dbi_base + where, size, val);
> >> +	if (ret != PCIBIOS_SUCCESSFUL)
> >> +		return ret;
> >> +
> >> +	/*
> >> +	 * There is a bug in the MESON AXG pcie controller whereby software
> >> +	 * cannot programme the PCI_CLASS_DEVICE register, so we must fabricate
> >> +	 * the return value in the config accessors.
> > 
> > s/pcie/PCIe/
> > s/programme/program/ (IIUC, "programme" is British and only used as a
> > noun, where here you need a verb)
> > 
> >> +static int meson_pcie_link_up(struct dw_pcie *pci)
> >> +{
> >> +	struct meson_pcie *mp = to_meson_pcie(pci);
> >> +	struct device *dev = pci->dev;
> >> +	u32 smlh_up = 0;
> >> +	u32 ltssm_up = 0;
> >> +	u32 rdlh_up = 0;
> > 
> > Unnecessary initialization of smlh_up, ltssm_up, and rdlh_up.
> > 
> >> +	u32 speed_okay = 0;
> >> +	u32 cnt = 0;
> >> +	u32 state12, state17;
> >> +
> >> +	do {
> >> +		state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
> >> +		state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
> >> +		smlh_up = IS_SMLH_LINK_UP(state12);
> >> +		rdlh_up = IS_RDLH_LINK_UP(state12);
> >> +		ltssm_up = IS_LTSSM_UP(state12);
> > 
> >> +	dev_err(dev, "Error: Wait linkup timeout.\n");
> > 
> > Message doesn't match others from driver (capitalization and trailing
> > period).
> > 
> >> +			dev_err(dev, "failed to get msi irq\n");
> > 
> > s/msi irq/MSI IRQ/
> > 
> >> +	ret = meson_add_pcie_port(mp, pdev);
> >> +	if (ret < 0) {
> >> +		dev_err(dev, "Add PCIE port failed, %d\n", ret);
> > 
> > s/PCIE/PCIe/
> > 
> > All the messages in this function are capitalized differently than
> > other messages in the driver.
> > 
> > Bjorn
> > 
> > .
> > 
> 
> hi Bjorn:
> 
> Thanks for the all suggestions and corrections.
> 
> There were too many code details unnecessary initialization, typing errors
> and coding style etc. I will pay more attention to these rules and code-details
> in the future patches also my daily work.

I have merged your patches with Bjorn's suggestions in my pci/amlogic
branch, aiming at v4.21, please have a look.

Lorenzo

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic