* [PATCH 0/2] arm64: dts: meson: libretech-cc: emmc update
@ 2018-12-20 16:10 Jerome Brunet
2018-12-20 16:10 ` [PATCH 1/2] arm64: dts: meson: libretech-cc: set eMMC as removable Jerome Brunet
2018-12-20 16:10 ` [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v Jerome Brunet
0 siblings, 2 replies; 6+ messages in thread
From: Jerome Brunet @ 2018-12-20 16:10 UTC (permalink / raw)
To: Kevin Hilman, Carlo Caione
Cc: devicetree, linux-amlogic, linux-kernel, Jerome Brunet
This patchset provides a couple of update for the eMMC on the libretech-cc
It should remove some error message for those who don't have an eMMC
module and improve the performance for those who do have one.
Jerome Brunet (2):
arm64: dts: meson: libretech-cc: set eMMC as removable
arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
.../boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--
2.19.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] arm64: dts: meson: libretech-cc: set eMMC as removable
2018-12-20 16:10 [PATCH 0/2] arm64: dts: meson: libretech-cc: emmc update Jerome Brunet
@ 2018-12-20 16:10 ` Jerome Brunet
2018-12-20 16:10 ` [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v Jerome Brunet
1 sibling, 0 replies; 6+ messages in thread
From: Jerome Brunet @ 2018-12-20 16:10 UTC (permalink / raw)
To: Kevin Hilman, Carlo Caione
Cc: devicetree, linux-amlogic, linux-kernel, Jerome Brunet
The eMMC on this board is add-on module which is not mandatory. Removing
'non-removable' property should prevent some errors when booting a board
w/o an eMMC module present.
Fixes: 72fb2c852188 ("ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index db293440e4ca..daad007fac1f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -256,7 +256,6 @@
cap-mmc-highspeed;
mmc-ddr-3_3v;
max-frequency = <50000000>;
- non-removable;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
--
2.19.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
2018-12-20 16:10 [PATCH 0/2] arm64: dts: meson: libretech-cc: emmc update Jerome Brunet
2018-12-20 16:10 ` [PATCH 1/2] arm64: dts: meson: libretech-cc: set eMMC as removable Jerome Brunet
@ 2018-12-20 16:10 ` Jerome Brunet
2018-12-22 17:01 ` Martin Blumenstingl
1 sibling, 1 reply; 6+ messages in thread
From: Jerome Brunet @ 2018-12-20 16:10 UTC (permalink / raw)
To: Kevin Hilman, Carlo Caione
Cc: devicetree, linux-amlogic, linux-kernel, Jerome Brunet
While some 3.3v eMMC 4.0 are available from libretech, the default
option for the aml-s905x-cc seems to 1.8v 5.0 modules.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index daad007fac1f..d0d202cf7161 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -118,8 +118,8 @@
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
};
@@ -254,8 +254,9 @@
bus-width = <8>;
cap-mmc-highspeed;
- mmc-ddr-3_3v;
- max-frequency = <50000000>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
--
2.19.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
2018-12-20 16:10 ` [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v Jerome Brunet
@ 2018-12-22 17:01 ` Martin Blumenstingl
2019-01-02 10:51 ` Jerome Brunet
0 siblings, 1 reply; 6+ messages in thread
From: Martin Blumenstingl @ 2018-12-22 17:01 UTC (permalink / raw)
To: Jerome Brunet
Cc: Carlo Caione, Kevin Hilman, linux-amlogic, linux-kernel, devicetree
Hi Jerome,
On Thu, Dec 20, 2018 at 5:11 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> While some 3.3v eMMC 4.0 are available from libretech, the default
> option for the aml-s905x-cc seems to 1.8v 5.0 modules.
nit-pick:
can you please state which module (storage size) you used for testing?
you probably still remember that we had some confusion on Odroid-C2
which eMMC module works and which doesn't, so let's be explicit here
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> index daad007fac1f..d0d202cf7161 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> @@ -118,8 +118,8 @@
> vddio_boot: regulator-vddio_boot {
> compatible = "regulator-fixed";
> regulator-name = "VDDIO_BOOT";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
is there a 3.3V -> 1.8V regulator on the eMMC module?
I'm not sure about the schematics but it seems to be that the board
itself supplies only 3.3V to the eMMC connector, so I'm not sure where
1.8V come from in this case
can you please add a comment to the .dts about this?
Regards
Martin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
2018-12-22 17:01 ` Martin Blumenstingl
@ 2019-01-02 10:51 ` Jerome Brunet
2019-01-11 0:53 ` Kevin Hilman
0 siblings, 1 reply; 6+ messages in thread
From: Jerome Brunet @ 2019-01-02 10:51 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: Carlo Caione, Kevin Hilman, linux-amlogic, linux-kernel, devicetree
On Sat, 2018-12-22 at 18:01 +0100, Martin Blumenstingl wrote:
> Hi Jerome,
>
> On Thu, Dec 20, 2018 at 5:11 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
> > While some 3.3v eMMC 4.0 are available from libretech, the default
> > option for the aml-s905x-cc seems to 1.8v 5.0 modules.
> nit-pick:
> can you please state which module (storage size) you used for testing?
> you probably still remember that we had some confusion on Odroid-C2
> which eMMC module works and which doesn't, so let's be explicit here
>
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> > .../boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 9 +++++----
> > 1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> > index daad007fac1f..d0d202cf7161 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> > @@ -118,8 +118,8 @@
> > vddio_boot: regulator-vddio_boot {
> > compatible = "regulator-fixed";
> > regulator-name = "VDDIO_BOOT";
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> is there a 3.3V -> 1.8V regulator on the eMMC module?
> I'm not sure about the schematics but it seems to be that the board
> itself supplies only 3.3V to the eMMC connector, so I'm not sure where
> 1.8V come from in this case
The module is indeed fed by 3.3v only but it has embedded LDOs add will feed
back the supply of the BOOT gpio bank.
I tried the following modules:
* 8 GB samsung - v1.0-170420
* 32 GB toshiba - v1.0-170421
I think you can't get them here [0].
In theory, these 4.x modules [1] could also work. They don't have the LDOs and
are directly feeding back the 3.3v to the BOOT bank. Since the modules are
advertised as being compatible with the Allwinner boards only, and not the AML
ones, it should not be the default option.
[0] :
https://www.loverpi.com/collections/libre-computer-project/products/libre-computer-board-emmc-5-x-module?variant=4173557729
[1] :
https://www.loverpi.com/collections/libre-computer-project/products/libre-computer-board-emmc-4-x-module?variant=761282232333
> can you please add a comment to the .dts about this?
Sure
>
>
> Regards
> Martin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
2019-01-02 10:51 ` Jerome Brunet
@ 2019-01-11 0:53 ` Kevin Hilman
0 siblings, 0 replies; 6+ messages in thread
From: Kevin Hilman @ 2019-01-11 0:53 UTC (permalink / raw)
To: Jerome Brunet, Martin Blumenstingl
Cc: Carlo Caione, devicetree, linux-kernel, linux-amlogic
Jerome Brunet <jbrunet@baylibre.com> writes:
> On Sat, 2018-12-22 at 18:01 +0100, Martin Blumenstingl wrote:
>> Hi Jerome,
>>
>> On Thu, Dec 20, 2018 at 5:11 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
>> > While some 3.3v eMMC 4.0 are available from libretech, the default
>> > option for the aml-s905x-cc seems to 1.8v 5.0 modules.
>> nit-pick:
>> can you please state which module (storage size) you used for testing?
>> you probably still remember that we had some confusion on Odroid-C2
>> which eMMC module works and which doesn't, so let's be explicit here
>>
>> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> > ---
>> > .../boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 9 +++++----
>> > 1 file changed, 5 insertions(+), 4 deletions(-)
>> >
>> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> > b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> > index daad007fac1f..d0d202cf7161 100644
>> > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> > @@ -118,8 +118,8 @@
>> > vddio_boot: regulator-vddio_boot {
>> > compatible = "regulator-fixed";
>> > regulator-name = "VDDIO_BOOT";
>> > - regulator-min-microvolt = <3300000>;
>> > - regulator-max-microvolt = <3300000>;
>> > + regulator-min-microvolt = <1800000>;
>> > + regulator-max-microvolt = <1800000>;
>> is there a 3.3V -> 1.8V regulator on the eMMC module?
>> I'm not sure about the schematics but it seems to be that the board
>> itself supplies only 3.3V to the eMMC connector, so I'm not sure where
>> 1.8V come from in this case
>
> The module is indeed fed by 3.3v only but it has embedded LDOs add will feed
> back the supply of the BOOT gpio bank.
>
> I tried the following modules:
> * 8 GB samsung - v1.0-170420
> * 32 GB toshiba - v1.0-170421
>
> I think you can't get them here [0].
>
> In theory, these 4.x modules [1] could also work. They don't have the LDOs and
> are directly feeding back the 3.3v to the BOOT bank. Since the modules are
> advertised as being compatible with the Allwinner boards only, and not the AML
> ones, it should not be the default option.
>
> [0] :
> https://www.loverpi.com/collections/libre-computer-project/products/libre-computer-board-emmc-5-x-module?variant=4173557729
> [1] :
> https://www.loverpi.com/collections/libre-computer-project/products/libre-computer-board-emmc-4-x-module?variant=761282232333
>
>> can you please add a comment to the .dts about this?
>
> Sure
>
OK, I'll wait for a v2 of this series.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-01-11 0:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-20 16:10 [PATCH 0/2] arm64: dts: meson: libretech-cc: emmc update Jerome Brunet
2018-12-20 16:10 ` [PATCH 1/2] arm64: dts: meson: libretech-cc: set eMMC as removable Jerome Brunet
2018-12-20 16:10 ` [PATCH 2/2] arm64: dts: meson: libretech-cc: switch eMMC to 1.8v Jerome Brunet
2018-12-22 17:01 ` Martin Blumenstingl
2019-01-02 10:51 ` Jerome Brunet
2019-01-11 0:53 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).