linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/2] arm64: dts: meson: add simple-framebuffer nodes
@ 2019-01-07  9:53 Maxime Jourdan
  2019-01-07  9:53 ` [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings Maxime Jourdan
  2019-01-07  9:53 ` [PATCH v2 2/2] arm64: dts: meson-gx: add support for simplefb Maxime Jourdan
  0 siblings, 2 replies; 5+ messages in thread
From: Maxime Jourdan @ 2019-01-07  9:53 UTC (permalink / raw)
  To: devicetree
  Cc: Maxime Jourdan, Rob Herring, Neil Armstrong, Kevin Hilman,
	linux-kernel, linux-amlogic, linux-arm-kernel

This patch series adds support for simplefb for the GXBB and GXL chips.

simple-framebuffer allows sharing a framebuffer already setup by the
firmware to the kernel for a seamless boot transition.

It goes along with a u-boot patch series adding display support to
GXBB & GXL that is not sent yet.

Changes since v1 [1]:
 - added cover letter
 - added simple-framebuffer compatible fallback to the bindings
 - Updated node names and removed the unit-address
 - Consolidated base nodes in meson-gx.dtsi
 
[1] https://patchwork.kernel.org/patch/10720879/

Maxime Jourdan (2):
  dt-bindings: meson: add specific simplefb bindings
  arm64: dts: meson-gx: add support for simplefb

 .../display/simple-framebuffer-meson.txt      | 33 +++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi     | 22 +++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi   |  6 ++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi    |  6 ++++
 4 files changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt

-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings
  2019-01-07  9:53 [PATCH v2 0/2] arm64: dts: meson: add simple-framebuffer nodes Maxime Jourdan
@ 2019-01-07  9:53 ` Maxime Jourdan
  2019-01-11 22:25   ` Rob Herring
  2019-01-07  9:53 ` [PATCH v2 2/2] arm64: dts: meson-gx: add support for simplefb Maxime Jourdan
  1 sibling, 1 reply; 5+ messages in thread
From: Maxime Jourdan @ 2019-01-07  9:53 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: Maxime Jourdan, Rob Herring, Neil Armstrong, linux-kernel,
	devicetree, linux-amlogic, linux-arm-kernel

Similar to simple-framebuffer-sunxi, we support different display pipelines
that the firmware is free to choose from.

This documents the "amlogic,simple-framebuffer" compatible and the
"amlogic,pipeline" extension.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
 .../display/simple-framebuffer-meson.txt      | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt

diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt
new file mode 100644
index 000000000000..aaa6c24c8e70
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt
@@ -0,0 +1,33 @@
+Meson specific Simple Framebuffer bindings
+
+This binding documents meson specific extensions to the simple-framebuffer
+bindings. The meson simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
+- amlogic,pipeline, one of:
+  "vpu-cvbs"
+  "vpu-hdmi"
+
+Example:
+
+chosen {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	simplefb_hdmi: framebuffer-hdmi {
+		compatible = "amlogic,simple-framebuffer",
+			     "simple-framebuffer";
+		amlogic,pipeline = "vpu-hdmi";
+		clocks = <&clkc CLKID_HDMI_PCLK>,
+			 <&clkc CLKID_CLK81>,
+			 <&clkc CLKID_GCLK_VENCI_INT0>;
+		power-domains = <&pwrc_vpu>;
+	};
+};
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v2 2/2] arm64: dts: meson-gx: add support for simplefb
  2019-01-07  9:53 [PATCH v2 0/2] arm64: dts: meson: add simple-framebuffer nodes Maxime Jourdan
  2019-01-07  9:53 ` [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings Maxime Jourdan
@ 2019-01-07  9:53 ` Maxime Jourdan
  1 sibling, 0 replies; 5+ messages in thread
From: Maxime Jourdan @ 2019-01-07  9:53 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: Maxime Jourdan, devicetree, Neil Armstrong, linux-kernel,
	linux-amlogic, linux-arm-kernel

SimpleFB allows transferring a framebuffer from the firmware/bootloader
to the kernel, while making sure the related clocks and power supplies
stay enabled.

Add nodes for CVBS and HDMI Simple Framebuffers.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 22 +++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  6 ++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  6 ++++++
 3 files changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 44c5c51ff1fa..a6ffdbba37b9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -50,6 +50,28 @@
 		};
 	};
 
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index a7b883ced0a8..a60d3652beee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -784,6 +784,12 @@
 	resets = <&reset RESET_SD_EMMC_C>;
 };
 
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
 &spicc {
 	clocks = <&clkc CLKID_SPICC>;
 	clock-names = "core";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index d5c3d78aafeb..3093ae421b17 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -787,6 +787,12 @@
 	resets = <&reset RESET_SD_EMMC_C>;
 };
 
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
 &spicc {
 	clocks = <&clkc CLKID_SPICC>;
 	clock-names = "core";
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings
  2019-01-07  9:53 ` [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings Maxime Jourdan
@ 2019-01-11 22:25   ` Rob Herring
  2019-01-16 12:27     ` Maxime Jourdan
  0 siblings, 1 reply; 5+ messages in thread
From: Rob Herring @ 2019-01-11 22:25 UTC (permalink / raw)
  To: Maxime Jourdan
  Cc: devicetree, Neil Armstrong, Kevin Hilman, linux-kernel,
	linux-amlogic, linux-arm-kernel

On Mon, Jan 07, 2019 at 10:53:06AM +0100, Maxime Jourdan wrote:
> Similar to simple-framebuffer-sunxi, we support different display pipelines
> that the firmware is free to choose from.
> 
> This documents the "amlogic,simple-framebuffer" compatible and the
> "amlogic,pipeline" extension.
> 
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> ---
>  .../display/simple-framebuffer-meson.txt      | 33 +++++++++++++++++++

Use the compatible string for the file name: 
amlogic,simple-framebuffer.txt

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings
  2019-01-11 22:25   ` Rob Herring
@ 2019-01-16 12:27     ` Maxime Jourdan
  0 siblings, 0 replies; 5+ messages in thread
From: Maxime Jourdan @ 2019-01-16 12:27 UTC (permalink / raw)
  To: Rob Herring
  Cc: devicetree, Neil Armstrong, Kevin Hilman, linux-kernel,
	linux-amlogic, linux-arm-kernel

On Fri, Jan 11, 2019 at 11:25 PM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Jan 07, 2019 at 10:53:06AM +0100, Maxime Jourdan wrote:
> > Similar to simple-framebuffer-sunxi, we support different display pipelines
> > that the firmware is free to choose from.
> >
> > This documents the "amlogic,simple-framebuffer" compatible and the
> > "amlogic,pipeline" extension.
> >
> > Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> > ---
> >  .../display/simple-framebuffer-meson.txt      | 33 +++++++++++++++++++
>
> Use the compatible string for the file name:
> amlogic,simple-framebuffer.txt
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks for the review, will send a v3.

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-01-16 12:28 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-07  9:53 [PATCH v2 0/2] arm64: dts: meson: add simple-framebuffer nodes Maxime Jourdan
2019-01-07  9:53 ` [PATCH v2 1/2] dt-bindings: meson: add specific simplefb bindings Maxime Jourdan
2019-01-11 22:25   ` Rob Herring
2019-01-16 12:27     ` Maxime Jourdan
2019-01-07  9:53 ` [PATCH v2 2/2] arm64: dts: meson-gx: add support for simplefb Maxime Jourdan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).